Download Print this page

OLT 8x12 Santa Rosa Assembly Manual page 12

Hide thumbs Also See for 8x12 Santa Rosa:

Advertisement

21.
Complete the 2 Porch Rail Sections,
following steps A through D.
A.
Attach Front Porch Extensions (3/4" x 3 1/2" x 45")
to Long Porch Post (3 1/2" x 3 1/2" x 73 7/8") with
2 - 2" screws. Make sure support is flush with post.
B.
Attach Front Wall Trim/Supports (1" x 4 1/2" x 74 7/8")
to Front Extension using 2 - 2" screws. Make sure Front
Extension is Flush to back of wall trim supports and
centered 1/2" on each side.
C.
Attach
both
3 - 2" screws. Attach from Front Extensions into
Brackets. Attach Brackets to Porch posts. Drill
Pilot hole in bracket first.
D.
Attach Hand Rail to complete your Porch Rail
Section. Hand rail should start 3 1/2" from bottom of
Post and be centered on Post. Use 3 - 2" screws to
attach. Hand rail will be fastened to Wall Trim/Support
when it is attached to the wall in Step 30.
Important:
Drill Pilot
Holes to
prevent wood
from splitting!
Plate Centered on
4 1/2" trim/supports.
Pre­Drill!
2 - 2"
screws
Toll Free 1-888-658-1658
Corner
Brackets
Wall Trim Support
- rabbeted edge
toward inside.
www.outdoorlivingtoday.com
A.
Front Porch Extension
with
Long
Porch
Post
Bracket centered
on post
Pre­Drill!
2 - 2"
screws
sales@outdoorlivingtoday.com
Page 12
C.
Exploded
View of
Front Wall
Porch Rail
Trim/Supports
Section
with rabbeted
edge.
Hand Rail
D.
Section
Hand
Rail
3 1/2"
Pre­Drill!
2 - 2"
screws
Porch
Post
Corner
Bracket
B.
Hand rail
equally
spaced on
Wall Trim
Support and
Porch Post.
Attach with
3 - 2" screws.
3 - 2" screws

Advertisement

loading