Advertisement
Shingles overhang plywood
on outside panels.
55.
Identify Roof Panels. There are 2 Outside and 1 Middle Roof Panel per side. Starting with
outside rear panel, lift up and place on rafters.
56.
Place Outside Roof Panel so it sits flush on 3rd rafter from the outside (doubled up rafter).
Plywood on roof should be inset 1/8" from end of rafter at bottom.
Screw bottom row of shingles down
to rafter with 1 - 2 1/2" screw.
57.
From the outside, screw down through bottom row of shingles into rafter with 1 - 2 1/2" screw.
Locate Middle Roof Panel (roof plywood flush with outside of shingles) and place on middle rafters.
Toll Free 1-888-658-1658
Shingles and plywood
flush on middle panel.
3rd Rafter from
the outside
www.outdoorlivingtoday.com
Roof Plywood inset
1/8" from rafter end
sales@outdoorlivingtoday.com
Page 25
Outside Roof Panel with
Shingles overhanging end.
Advertisement
