OLT 8x12 Santa Rosa Assembly Manual page 16

28.
Attach the 4 Side Top Plates (3/4" x 2 1/2"
x 66 3/4") There are 2 Side Top Plates per side.
The side top plates are angle cut down the
length. Once again, position top plate on wall
plate so it is flush with inside of wall plate. Side
plate should also be flush with rear wall plate.
Secure with:
4 - 2" screws per rear piece.
1 - 2" screw & 3 - 1 1/4" screws per front piece.
29
. Position the Front Top Plates (3/4" x 2 1/2"
x 72" & 19") on top of Door Header and front wall
panel. There are 2 plates (72" and 19" long).
Front top plates are straight cut on the ends.
Once again, the plate will be flush with inside of
top wall framing. Attach with 6 - 2" screws (4
screws in long and 2 in short plate).
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com
Page 16
4 - 2"
screws
Pre­Drill!
1 - 2"
screw
Flush
sales@outdoorlivingtoday.com
Pre­Drill!