Advertisement
65.
Slide in another Filler Shingle and attach as per Step 64. Repeat, working your way up to the
top. The top row Filler Shingles are cut shorter than the others (7 1/4" length). Attach top row Filler
Shingles with 2 - 1 1/2" shingle nails.
66.
Position 4 - 90° Metal Brackets on plywood and rear outside rafters and secure with
4 - 1 1/4" screws per bracket.
67.
To further secure roof panels, from the inside, drill pilot holes in each Mid Rafter (3 per Rafter)
on an angle. Using 3 - 2 1/2" screws, secure rafters to roof plywood. Note: from outside, have a
helper push roof panel down so plywood sits flush against rafter when securing. In Porch area, angle
screw both the mid and outside rafters.
Toll Free 1-888-658-1658
4 - 90 degree Metal
Brackets above Rear Gable.
3 - 2 1/2" screws Toe
Nailed in each Mid Rafter
www.outdoorlivingtoday.com
Page 28
sales@outdoorlivingtoday.com
Advertisement
