OLT 8x12 Santa Rosa Assembly Manual page 14

24.
Attach remaining 15 Deck Boards (1" x 5 1/2" x 44 3/4") using 4 - 2" Screws per piece.
Equally space all deck boards before attaching. Ensure screws enter the floor joists beneath deck
boards. Pre-drill for screws at the ends of the deck boards.
25.
Prior to fastening walls and installing rafters, take time to confirm your
walls are level, square and plumb. Measure diagonal at top and bottom of
walls corner-to-corner. If measurements are not within 1/4", your walls are
not square. Adjusting now will make it easier to install roof section.
Toll Free 1-888-658-1658
Pre­Drill!
Pre­Drill!
www.outdoorlivingtoday.com
Page 14
Lay all Deck Boards down evenly
spaced prior to attaching.
sales@outdoorlivingtoday.com
Check for
plumb