Advertisement
2 1/2"
screws
51.
Attach Rafters in porch area into Top Plate
of porch with 1 - 2 1/2" screw per Rafter. Once
again, measure 91" from inside of wall plate to
wall plate for correct Rafter alignment prior to
attaching. Drill pilot holes in rafters on angle first
to prevent splitting and then screw down.
53.
Slide gusset up. Use level to square gusset
and attach to rafters with 4 - 2" screws per gusset.
Complete remaining gusset.
54.
Attach Single and Double
Rafter Brackets where rafters meet
Top Wall Plates inside of shed. Attach
with 4 - 2" screws per Single Rafter
Bracket and 6 - 2" screws per Double
Rafter Bracket. Have two helpers
push the Side Walls from the outside
of the shed until inside measurement
between Top Plates is 91".
Toll Free 1-888-658-1658
52.
positioned on middle rafters. Prior to attaching,
make sure walls are properly aligned. Have two
helpers push walls at the top from the outside of
shed until inside to inside measurement between
front and rear plates is 91".
www.outdoorlivingtoday.com
Page 24
91" across
Roof Gussets (3/4" x 3 1/2" x 72") are
sales@outdoorlivingtoday.com
2 Gussets
Advertisement
