Advertisement
Flush with end
of plywood
80.
Attach two Roof Nailing Strips (2 - 3/4" x 2 1/2" x 48") to the underside of the roof plywood on
rear of shed. Align strips flush with plywood ends. Fasten with 4 - 1 1/4" Screws per piece.
81.
Attach remaining two Roof Nailing Strips (2 - 3/4" x 2 1/2" x 48") to the underside of the roof
plywood on front of shed. These strips will be pushed tight against the rafters unlike the Rear Nailing
Strips. Fasten with 4 - 1 1/4" Screws per piece.
82.
Position Front Post Detail Covers
(2 - 3/4" x 5 1/2" x 23 1/4") onto bottom corner
of rafters, tight underneath Facia Nailing
Strips. Covers should be approximately flush
with the bottom of the Porch Roof, the inside
of the 4x4 Porch Post, and the Rafter ends.
Attach with 4 - 1 1/2" finishing nails per piece.
Toll Free 1-888-658-1658
Strips tight
to rafters
www.outdoorlivingtoday.com
Page 37
Flush
sales@outdoorlivingtoday.com
Flush
Advertisement
