Honeywell Farenhyt Series Installation And Operation Manual page 39

Follow these steps to flush mount the RA-100
1. The back box dimensions are 9-9/32" w x 8-3/8" h. The minimum depth 2". The back box can be mounted prior to the complete
installation of the RA-100 using any of the mounting holes shown in Figure 4.10.
2. Remove knockout holes as needed for wires. See Figure 4.11 for backbox knockout locations
3. Wire the Annunciator board to the main control panel. See Figure 4.8.
IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Figure 4.10 Back Box Mounting Holes
Wire Knockouts
Figure 4.11 Back Box Knockout Locations
Mounting Holes
Mounting Holes
Wire Knockouts
Wire Knockouts
32