280
4-5. Using the driving support systems
correctly detect vehicles ahead, the
system may not operate properly.
●
When the road curves or when the
lanes are narrow
●
When steering wheel operation or
your position in the lane is unsta-
ble
●
When the vehicle ahead of you
decelerates suddenly
●
When driving on a road sur-
rounded by a structure, such as in
a tunnel or on a bridge
●
While the vehicle speed is
decreasing to the set speed after
the vehicle accelerates by
depressing the accelerator pedal
HIGHLANDER HV_U
BSM (Blind Spot Moni-
tor)
The Blind Spot Monitor is a
system that uses rear side
radar sensors installed on
the inner side of the rear
bumper on the left and right
side to assist the driver in
confirming safety when
changing lanes.
WARNING
■
Cautions regarding the use of
the system
The driver is solely responsible for
safe driving. Always drive safely,
taking care to observe your sur-
roundings.
The Blind Spot Monitor is a sup-
plementary function which alerts
the driver that a vehicle is in a
blind spot of the outside rear view
mirrors or is approaching rapidly
from behind into a blind spot. Do
not overly rely on the Blind Spot
Monitor. As the function cannot
judge if it is safe to change lanes,
over reliance could lead to an
accident resulting in death or seri-
ous injury.
As the system may not function
correctly under certain condi-
tions, the driver's own visual con-
firmation of safety is necessary.