444
6-3. Do-it-yourself maintenance
Front fog lights
Side turn signal lights
Tail lights/stop lights
Rear side marker lights
Tail lights
High mounted stoplight
Outer foot lights (if equipped)
■
LED lights
The lights other than the following
lights each consist of a number of
LEDs. If any of the LEDs burn out,
take your vehicle to your Toyota
dealer to have the light replaced.
●
Front turn signal lights/parking
lights (type A)
●
Front turn signal lights (type B)
●
Front side marker lights
●
Rear turn signal lights
●
Back-up lights
●
License plate lights
■
Condensation build-up on the
inside of the lens
Temporary condensation build-up
on the inside of the light lens does
not indicate a malfunction. Contact
your Toyota dealer for more informa-
tion in the following situations:
●
Large drops of water have built up
on the inside of the lens.
●
Water has built up inside the light.
■
When replacing light bulbs
P.441
HIGHLANDER HV_U
Replacing light bulbs
Front turn signal
■
lights/parking lights (type
A) and front turn signal
lights (type B)
1
Turn the bulb base counter-
clockwise and remove it.
2
Remove the light bulb.
3
Install a new light bulb, and
then install the bulb base to
the light unit by inserting it
and turning the bulb base
clockwise.
After installing the bulb base, wig-
gle it lightly to make sure it is
securely installed and turn the lights
and turn signal lights on to visually
check that there is no light leaking
from between the bulb base and