Toyota Highlander Hybrid 2020 Owner's Manual page 387

Vehicles with auto anti-glare

inside rear view mirror
Vehicles with Digital Rearview

Mirror
Programming a device other

than an entry gate (for U.S.A.
owners)
Press and hold the remote con-
trol transmitter button until the
®
HomeLink indicator light
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.
Programming an entry gate

(for U.S.A. owners)/Program-
ming a device in the Cana-
dian market
Press and release the remote
control transmitter button at 2
HIGHLANDER HV_U
5-5. Using the other interior features
second intervals, repeatedly,
until the HomeLink
light changes from slowly flash-
ing (orange) to rapidly flashing
(green) (rolling code) or continu-
ously lit (green) (fixed code).
4
Test the HomeLink
tion by pressing the newly
programmed button and
observing the indicator light:
 HomeLink
minates: Programming of a
fixed code device has com-
pleted. The garage door or
other device should operate
when a HomeLink
pressed and released.
 HomeLink
flashes rapidly: The garage
door opener motor or other
device is equipped with a roll-
ing code. To complete pro-
gramming, firmly press and
hold the HomeLink
for 2 seconds then release it.
 If the garage door or other
device does not operate, pro-
ceed to "Programming a roll-
ing code system".
5
Repeat the steps above to
program another device for
any of the remaining Home-
®
Link
Programming a rolling code
■
system
Two or more people may be
necessary to complete rolling
®
indicator
®
opera-
®
indicator light illu-
®
button is
®
indicator light
®
button
buttons.
387
5