Toyota Highlander Hybrid 2020 Owner's Manual page 107

Maximum G-force course
This item is linked with the G-force
display and the course of the past
movement of the ball is displayed.
Press and hold
record.
Wheel spin display
When a tire is spinning, its icon on
the display changes its color and
blinks.
*
: This item is displayed only when
driving mode is set to sport mode.
Safety system status
■
Enable/Disable the following
systems:
 PCS (Pre-Collision system)
(P.249)
 Intuitive parking assist (if
equipped) (P.286)
 BSM (Blind Spot Monitor)
(P.280)
 RCTA (Rear Cross Traffic
Alert) (P.294)
■ Tire pressure
• It may take a few minutes to dis-
play the tire inflation pressure
after the power switch is turned to
ON. It may also take a few min-
utes to display the tire inflation
pressure after inflation pressure
has been adjusted.
• "---" may be displayed if the tire
position information cannot be
determined due to unfavorable
radio wave conditions.
• Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
HIGHLANDER HV_U
*
Settings display (
■
Use the meter control switches
to reset the
on the steering wheel to change
settings.
1
2
3
The available settings will differ
depending on if
pressed and held. Follow the
instructions on the display.
■

Press and hold
settings of the following items:
• "Lane Center"
Select to enable/disable the lane
centering function.
• "Steering Assist"
Select to enable/disable steering
wheel assistance.
• "Sensitivity"
Select to set the warning sensitivity.
• "Sway Warning"
Select to enable/disable the vehicle
sway warning.
• "Sway Sensitivity"
Select to set the vehicle sway warn-
2-1. Instrument cluster
Changing settings
Press or of the meter
control switch to select
Press or of the meter
control switch to select the
desired item to be custom-
ized.
Press or press and hold
is pressed or
Setting items
LTA (Lane Tracing Assist)
(P.257)
to change the
107
)
.
2
.