Toyota Highlander Hybrid 2020 Owner's Manual page 31

ing and stowing the seat belt.
3
Stow the plate
the holder on the roof.
In order to securely stow them,
firmly insert them as far as possi-
ble.
Adjusting the seat belt
shoulder anchor height
(front seats)
1
Push the seat belt shoulder
anchor down while pressing
the release button
2
Push the seat belt shoulder
HIGHLANDER HV_U
anchor up.
Move the height adjuster up and
down as needed until you hear a
click.
■ Adjustable shoulder anchor
Always make sure the shoulder
belt is positioned across the cen-
ter of your shoulder. The belt
should be kept away from your
and in
neck, but not falling off your shoul-
der. Failure to do so could reduce
the amount of protection in an
accident and cause death or seri-
ous injuries in the event of a sud-
den stop, sudden swerve or
accident.
Seat belt comfort guide
(for the third center seat)
If the shoulder belt sits close to
a person's neck, use the seat
belt comfort guide.
1
Pull the comfort guide from
the pocket.
2
Slide the belt past the slot of
the guide.
The elastic cord must be behind the
.
1-1. For safe use
WARNING
31
1