Toyota Highlander Hybrid 2020 Owner's Manual page 447

9
Install the cover.
Back-up lights
■
1
Open the back door and
remove the cover.
Using a flathead screwdriver,
remove the cover.
To prevent damage to the vehicle,
wrap the tip of the flathead screw-
driver with tape, etc.
2
Turn the bulb base counter-
clockwise and remove it.
HIGHLANDER HV_U
6-3. Do-it-yourself maintenance
3
Remove the light bulb.
4
Install a new light bulb, and
then install the bulb base to
the light unit by inserting it
and turning it clockwise.
After installing the bulb base, wig-
gle it lightly to make sure it is
securely installed and turn on the
back-up lights to visually check that
there is no light leaking from
between the bulb base and light
unit.
5
Install the cover.
Align the tabs of the cover with the
grooves and install the cover.
447
6