Table of Contents

Advertisement

Quick Links

Pictorial index
For safety
and security
Vehicle status
information and
indicators
Before driving
Driving
Interior features
Maintenance
and care
When trouble
arises
Vehicle
specifications
For owners
Index
HIGHLANDER HV_U
Search by illustration
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Reading driving-related information
(Main topics: Meters, multi-information display)
Opening and closing the doors and windows,
adjustment before driving
(Main topics: Keys, doors, seats)
Operations and advice which are necessary for
driving
(Main topics: Starting hybrid system, refueling)
Usage of the interior features
(Main topics: Air conditioner, storage features)
Caring for your vehicle and maintenance
procedures
(Main topics: Interior and exterior, light bulbs)
What to do in case of malfunction and emergency
(Main topics: 12-volt battery discharge, flat tire)
Vehicle specifications, customizable features
(Main topics: Fuel, oil, tire inflation pressure)
Reporting safety defects for U.S. owners, and seat
belt, SRS airbag and headlight aim instructions for
Canadian owners
Search by symptom
Search alphabetically
1
2
3
4
5
6
7
8
9 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Highlander Hybrid 2020 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toyota Highlander Hybrid 2020

  • Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats)
  • Page 2: Table Of Contents

    TABLE OF CONTENTS For your information ......Before driving Reading this manual ......10 How to search........11 Pictorial index ........12 3-1. Key information Keys ........For safety and security 3-2. Opening, closing and locking the doors 1-1. For safe use Side doors......Before driving ......24 Back door......
  • Page 3 4-5. Using the driving support sys- 5-3. Using the interior lights tems Interior lights list ....Toyota Safety Sense 2.0 ..5-4. Using the storage features PCS (Pre-Collision System) ......... List of storage features ..LTA (Lane Tracing Assist)...
  • Page 4 TABLE OF CONTENTS Hood ........If the 12-volt battery is dis- charged ......Positioning a floor jack ..If your vehicle overheats ..Engine compartment ..If the vehicle becomes stuck 12-volt battery ............. Tires ........Tire inflation pressure..Vehicle specifications Wheels .......
  • Page 5: For Your Information

    However, because of they may have on, your Toyota the Toyota policy of continual vehicle. product improvement, we This vehicle should not be modi-...
  • Page 6 The vehicle is equipped with government agency sophisticated computers that will • For use by Toyota in a lawsuit record certain data, such as: • For research purposes where the • Engine speed/Electric motor...
  • Page 7 (U.S. mainland only) tor and/or brake pedal; and, • How fast the vehicle was trav- If your Toyota has Safety Con- eling. nect and if you have subscribed to those services, please refer to These data can help provide a...
  • Page 8 ■ General precautions while driving • For use by Toyota in a lawsuit Driving under the influence: Never However, if necessary, Toyota may: drive your vehicle when under the influence of alcohol or drugs that •...
  • Page 9 WARNING ■ General precaution regarding children’s safety Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure them- selves by playing with the win- dows, the moon roof or panoramic...
  • Page 10: Reading This Manual

    Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual. switches and other devices. Symbols in this manual Indicates the out- come of an operation Symbols Meanings (e.g. a lid opens). WARNING: Explains something that, if not obeyed,...
  • Page 11: How To Search

    Searching by title ■ How to search  Table of contents: P.2 Searching by name ■  Alphabetical index: P.555 Searching by installation ■ position  Pictorial index: P.12 Searching by symptom or ■ sound  What to do if... (Troubleshoot- ing): P.552 HIGHLANDER HV_U...
  • Page 12: Pictorial Index

    Pictorial index Pictorial index ■Exterior The shape of the lights may differ depending on the grade, etc. Side doors ................P.131 Locking/unlocking ..............P.131 Opening/closing the side windows ........P.179 Locking/unlocking by using the mechanical key ....P.489 Warning lights/warning messages ....... P.460, 470 Back door ................
  • Page 13 Pictorial index Precautions for winter season..........P.327 To prevent freezing (windshield wiper de-icer)..... P.338 Precautions for car wash ............ P.395 Fuel filler door ..............P.240 Refueling method ..............P.240 Fuel type/fuel tank capacity ..........P.507 Tires..................P.418 Tire size/inflation pressure ........... P.418, 511 Winter tires/tire chains ............
  • Page 14 Pictorial index Rear side marker lights ............. P.229 Side turn signal lights ............P.223 : If equipped HIGHLANDER HV_U...
  • Page 15 Pictorial index ■Instrument panel Power switch ..............P.213 Starting the hybrid system/changing the modes ....P.213 Emergency stop of the hybrid system ........P.452 When the hybrid system will not start ........P.486 Warning messages .............. P.470 Shift lever................P.220 Changing the shift position...........
  • Page 16 Pictorial index When the warning messages are displayed ......P.470 Turn signal lever..............P.223 Headlight switch ..............P.229 Headlights/side marker lights/parking lights/tail lights/license plate lights/daytime running lights..........P.229 Front fog lights ..............P.235 Windshield wiper and washer switch....... P.235, 238 Usage................
  • Page 17 Pictorial index ■Switches Driving position memory switches ........ P.159 Window lock switch ............P.181 Power window switches ............ P.179 Door lock switches ............P.134 Outside rear view mirror switches ........P.177 “ODO TRIP” switch .............. P.91 Instrument panel light control switches ......P.92 Automatic High Beam switch ...........
  • Page 18 Pictorial index Meter control switches ..........P.93, 102 Vehicle-to-vehicle distance switch ........P.275 Cruise control switch Dynamic radar cruise control with full-speed range ..... P.270 Audio remote control switches LTA (Lane Tracing Assist) switch ........P.257 Phone switch Talk switch : Refer to “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MAN- UAL”.
  • Page 19 Pictorial index USB port USB charging ports ............P.368 Power outlet ............... P.377 Brake hold switch .............. P.227 Parking brake switch ............P.224 Applying/releasing..............P.224 Precautions against winter season ........P.327 Warning buzzer/light/message........P.460, 470 Trail Mode switch ............P.317 EV drive mode switch ............
  • Page 20 Pictorial index ■Interior SRS airbags ................P.34 Floor mats................P.24 Front seats................P.153 Rear seats ................P.154 Head restraints ..............P.162 Seat belts ................P.27 Console box ............... P.360 Inside lock buttons ............P.134 Cup holders ................ P.361 Assist grips ................ P.376 *1, 2 Rear seat entertainment system : If equipped...
  • Page 21 Pictorial index ■Ceiling Auxiliary box ..............P.362 Conversation mirror ............P.383 Interior light ..............P.357 Personal lights ..............P.357 Moon roof switches ............P.182 Panoramic moon roof switches ........P.185 Vanity mirrors ..............P.382 Sun visors................P.382 “SOS” button ..............P.65 Inside rear view mirror ............
  • Page 22 Pictorial index HIGHLANDER HV_U...
  • Page 23: For Safety And Security

    For safety and security 1-1. For safe use Before driving....24 For safe driving ....25 Seat belts .......27 SRS airbags ....34 Front passenger occupant classification system ..43 Exhaust gas precautions ........48 1-2. Child safety Riding with children ..49 Child restraint systems... 1-3.
  • Page 24: Before Driving

    Do not use floor mats designed (clips) into the floor mat eye- for other models or different lets. model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
  • Page 25: For Safe Driving

    1-1. For safe use For safe driving WARNING ■ Before driving For safe driving, adjust the Check that the floor mat is ● securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
  • Page 26 1-1. For safe use properly wear the vehicle’s seat WARNING belt. (P.50) ■ For safe driving Observe the following precau- Adjusting the mirrors tions. Failure to do so may result in death or serious injury. Make sure that you can see ●...
  • Page 27: Seat Belts

    If the seat belt is not worn prop- ● Toyota recommends that chil- erly, not only the pregnant dren be seated in the rear seat woman, but also the fetus could and always use a seat belt...
  • Page 28 This feature is used to any necessary repairs carried hold the child restraint system out by your Toyota dealer. Inap- (CRS) firmly. To free the belt again, propriate handling may lead to fully retract the belt and then pull the incorrect operation.
  • Page 29 1-1. For safe use Fastening and releasing the seat belt (except for the third center seat) WARNING ■ Using a seat belt extender Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident.
  • Page 30 1-1. For safe use Fastening the seat belt WARNING (for the third center seat) ■ When using the third center seat belt Take the plate out of the holder, and then pull down the seat belt. Do not use the third center seat belt with either buckle released.
  • Page 31 1-1. For safe use anchor up. ing and stowing the seat belt. Move the height adjuster up and down as needed until you hear a click. WARNING ■ Adjustable shoulder anchor Always make sure the shoulder belt is positioned across the cen- ter of your shoulder.
  • Page 32 1-1. For safe use seat belt. ● Always make sure the shoulder belt is positioned across the center of the shoulder. The belt should be kept away from the neck, and should not fall off the shoulder. Seat belt pretensioners (front seats) Buckle the seat belt and posi- tion it comfortably.
  • Page 33 ● If the pretensioner has acti- vated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. HIGHLANDER HV_U...
  • Page 34: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to cer- tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ■...
  • Page 35 1-1. For safe use SRS curtain shield airbags • Can help protect primarily the head of occupants in the outer seats • Can help prevent the occupants from being thrown from the vehicle in the event of vehicle rollover SRS airbag system components ■...
  • Page 36 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc. shown in the system components diagram above.
  • Page 37 1-1. For safe use SRS front airbags for the front passenger may deploy if luggage is put in the seat, even if the seat is unoccupied. ● The SRS seat cushion airbag on the front passenger seat will not operate if the occupant is not wearing a seat belt.
  • Page 38 In the following cases, the vehicle compartment will require inspection and/or repair. ● Collision from the side at an angle Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
  • Page 39 1-1. For safe use scratched, cracked, or otherwise WARNING damaged. ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
  • Page 40 1-1. For safe use ● If the seat belt extender has WARNING been connected to the front • Slightly recline the back of the seat belt buckles but the seat seat. belt extender has not also been Although vehicle designs vary, fastened to the latch plate of the many drivers can achieve the seat belt, the SRS front airbags...
  • Page 41 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
  • Page 42 If the areas where the SRS air- bags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ● Do not hang coat hangers or ●...
  • Page 43: Front Passenger Occupant Clas- Sification System

    1-1. For safe use Front passenger occu- WARNING pant classification ● Modifications to the front door system panel (such as making a hole in ● Repairs or modifications of the Your vehicle is equipped front fender, front bumper, or with a front passenger side of the occupant compart- occupant classification sys- ment...
  • Page 44 1-1. For safe use “PASS AIR BAG ON” indica- ● Make sure the front passenger’s seat belt plate has not been left tor light inserted into the buckle before Vehicles with a 12.3-inch dis- someone sits in the front pas- ...
  • Page 45 OFF” indicator light to be illumi- sification system. In this case, nated, which indicates that the contact your Toyota dealer SRS airbags for the front pas- immediately. senger will not activate in the event of a severe accident. If ●...
  • Page 46 1-1. For safe use Condition and operation in the front passenger occupant classification system Adult ■ “PASS AIR BAG ON” and “PASS “PASS AIR BAG AIR BAG OFF” indicator lights ON” Indicator/warning SRS warning light light Driver’s and front passenger’s seat or flashing belt reminder light Front passenger airbag...
  • Page 47 1-1. For safe use Unoccupied ■ “PASS AIR BAG ON” and “PASS “PASS AIR BAG AIR BAG OFF” indicator lights OFF” Indicator/warning SRS warning light light Driver’s and front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Seat cushion airbag in the front passenger side There is a malfunction in the system ■...
  • Page 48: Exhaust Gas Precautions

    Failure to do so may cause repaired by your Toyota dealer. exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
  • Page 49: Child Safety

    1-2. Child safety Riding with children 1-2.Child safety WARNING ■ When children are in the vehi- Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the vehicle or shift the vehicle into...
  • Page 50: Child Restraint Systems

    1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
  • Page 51 If it is necessary to detach the WARNING child restraint system, remove it ● Toyota strongly urges the use of from the vehicle or store it a proper child restraint system securely in the luggage com- that conforms to the weight and partment.
  • Page 52 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.55 Child restraint LATCH P.60 anchors attachment...
  • Page 53 1-2. Child safety Installation method Page 8-seat models second seats: 7-seat models second seats: Anchor brackets (for top tether strap) attach- P.62 ment Third seats : The third seats are not equipped with Child restraint LATCH anchors. For the safety of a child, install When using a child child restraint systems to sec- restraint system...
  • Page 54 1-2. Child safety  Move the seat to the rearmost ● A forward-facing child restraint position system may be installed on the front passenger seat only when  Raise the seatback as much it is unavoidable. A child restraint system that requires a as possible top tether strap should not be ...
  • Page 55 1-2. Child safety ● If the driver’s seat interferes WARNING with the child restraint system ● Do not allow the child to lean and prevents it from being his/her head or any part of attached correctly, attach the his/her body against the door or child restraint system to the the area of the seat, front or rear right-hand rear seat.
  • Page 56 1-2. Child safety Place the child restraint sys- the rear seat, allow the shoul- tem on the rear seat facing der belt to retract until the child restraint system is the rear of the vehicle. securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 57 1-2. Child safety Remove the head restraint if in lock mode. In lock mode, it interferes with your child the belt cannot be extended. restraint system. (P.162) While pushing the child Place the child restraint sys- restraint system into the rear tem on the seat facing the seat, allow the shoulder belt front of the vehicle.
  • Page 58 1-2. Child safety and forth to ensure that it is High back type  installed securely. (P.59) Booster seat ■ If installing the child restraint system to the front passen- ger seat is unavoidable, refer to P.53for the front passenger seat adjustment.
  • Page 59 1-2. Child safety system. ● When a booster seat is installed, always ensure that the Since the seat belt automatically shoulder belt is positioned reels itself, slowly return it to the across the center of the child’s stowing position. shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
  • Page 60 1-2. Child safety Remove the head restraint if WARNING it interferes with your child ■ Do not use a seat belt restraint system. (P.162) extender If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or...
  • Page 61 1-2. Child safety With rigid lower attachments However, the inboard LATCH  anchors of the outboard seats, Latch the buckles onto the which are 18.6 in. (473 mm) LATCH anchors. apart, can be used if the child For owners in Canada: restraint system manufacturer’s The symbol on a child instructions permit use of those...
  • Page 62 1-2. Child safety 8-seat models second seats  WARNING ● Never attach two child restraint system attachments to the same anchor. In a collision, one anchor may not be strong enough to hold two child restraint system attachments and may break. If the LATCH anchors are already in use, use the seat belt to install a child restraint system in the cen-...
  • Page 63 1-2. Child safety anchors. Top tether strap Fixing the top tether strap ■ Fixing the top tether strap ■ to the anchor bracket (sec- to the anchor bracket (third ond seats) center seat) Install the child restraint system Install the child restraint system in accordance to the operation in accordance to the operation manual enclosed with the child...
  • Page 64 1-2. Child safety ● If the seat is adjusted, reconfirm ■ Laws and regulations pertain- the security of the child restraint ing to anchors system. The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming NOTICE to FMVSS213 or CMVSS213 speci- fications can be used.
  • Page 65: Emergency Assistance

    Toyota.com in the United States, Toyotapr.com in Puerto Rico and Toyota.ca in Canada. All use of the Safety Connect service is subject to such then-applicable Terms and Conditions.
  • Page 66 1-3. Emergency assistance ■ Certification for Safety Connect  Automatic Collision Notifica- Services tion Subscribers have the following Helps drivers receive necessary Safety Connect services avail- response from emergency service able: providers. (P.68) HIGHLANDER HV_U...
  • Page 67  Stolen Vehicle Location ● Safety Connect is available begin- Helps drivers in the event of vehicle ning Fall 2009 on select Toyota models (in the contiguous United theft. (P.68) States only). Contact with the  Emergency Assistance Button...
  • Page 68 Further information is available In case of either airbag deploy- at Toyota.com in the United ment or severe rear-end colli- States, Toyotapr.com in Puerto sion, the system is designed to Rico and Toyota.ca in Canada.
  • Page 69 Protection) [1996] the Safety Connect Terms and Conditions, which are available Those standards were based on at Toyota.com in the United comprehensive and periodic States, Toyotapr.com in Puerto evaluations of the relevant sci- Rico and Toyota.ca in Canada.
  • Page 70 1-3. Emergency assistance develop the ANSI Standard (C95.1). The design of Safety Connect complies with the FCC guide- lines in addition to those stan- dards. HIGHLANDER HV_U...
  • Page 71: Hybrid System

    1-4. Hybrid system Hybrid system features 1-4.Hybrid system Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
  • Page 72 1-4. Hybrid system electric motor (traction motor) is D or S. used. ● The brake pedal is depressed while driving with the shift lever in When the shift lever is in N, the D or S. hybrid battery (traction battery) ■...
  • Page 73 1-4. Hybrid system and you are unable to start the ● Sounds may be heard due to hybrid system, contact your Toyota regenerative braking when the dealer. brake pedal is depressed or as the accelerator pedal is released. ■ Charging the 12-volt battery ●...
  • Page 74 The system may be malfunctioning. charge the hybrid battery (traction Have the vehicle inspected by your battery) after the accelerator pedal Toyota dealer. is released. ■ Predictive SOC control Predictive efficient drive The following types of control are...
  • Page 75: Hybrid System Precautions

    1-4. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high voltage system (about 650 V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle. System components The illustration is an example for explanation and may differ from the actual item.
  • Page 76 1-4. Hybrid system [11.3 L, 2.4 Imp. gal.], when the ● Never try to open the service vehicle is on a level surface. This plug access hole located under value may vary when the vehicle is the rear seat. The service plug on a slope.
  • Page 77 Leave the your Toyota dealer or a qualified vehicle as soon as possible. service shop. If the hybrid bat- tery is not disposed of properly, ■...
  • Page 78 The hybrid system may not start. In this case, try to start the system again. If the “READY” indicator does Emergency shut off sys- not come on, contact your Toyota dealer. When a certain level of impact is detected by the impact sensor,...
  • Page 79: Theft Deterrent System

    1-5. Theft deterrent system Immobilizer system 1-5.Theft deterrent system ■ System maintenance The vehicle has a mainte- nance-free type immobilizer system. The vehicle’s keys have built-in transponder chips ■ Conditions that may cause the system to malfunction that prevent the hybrid sys- ●...
  • Page 80 1-5. Theft deterrent system ■ Certification for the immobilizer system Except for vehicles sold in Canada  For vehicles sold in Canada  NOTICE ■ To ensure the system oper- ates correctly Do not modify or remove the sys- tem. If modified or removed, the proper operation of the system cannot be guaranteed.
  • Page 81: Alarm

    1-5. Theft deterrent system will be set automatically after 30 Alarm seconds. : If equipped The security indicator changes from being on to flashing when the sys- The alarm uses light and tem is set. sound to give an alert when an intrusion is detected.
  • Page 82 1-5. Theft deterrent system ● The 12-volt battery is recharged or replaced when the vehicle is locked. (P.494) ■ Alarm-operated door lock In the following cases, depending on the situation, the door may auto- matically lock to prevent improper entry into the vehicle: ●...
  • Page 83: Vehicle Status Information And Indicators

    Vehicle status information and indicators 2-1. Instrument cluster Warning lights and indica- tors .......84 Gauges and meters ..89 Multi-information display (4.2-inch display)..92 Multi-information display (7-inch display)..Head-up display ..Energy monitor/consump- tion screen....HIGHLANDER HV_U...
  • Page 84: Warning Lights And Indicators

    2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, center panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Warning lights and indicators displayed on the instru- ment cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
  • Page 85 2-1. Instrument cluster 7-inch display  The units used on the meters and some indicators may differ depending on the target region. Warning lights Malfunction indicator lamp (P.461) Warning lights inform the driver (U.S.A.) of malfunctions in the indicated Malfunction indicator vehicle’s systems.
  • Page 86 (P.463) or turn off. Have the vehicle Rear passengers’ seat inspected by your Toyota dealer. belt reminder light : This light illuminates on the (P.464) multi-information display.
  • Page 87 2-1. Instrument cluster Front fog light indicator EV drive mode indicator (P.235) (P.218) *3, 4 PCS warning light Parking brake indicator (P.251) (P.224) (U.S.A.) Cruise control indicator (P.277) Parking brake indicator Dynamic radar cruise con- (P.224) (Canada) trol indicator (P.270) Brake hold standby indica- Cruise control “SET”...
  • Page 88 Have the vehicle inspected by your Toyota dealer. : In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the follow- ing situations: ...
  • Page 89: Gauges And Meters

    2-1. Instrument cluster Gauges and meters Meter display Locations of gauges and meters ■ 4.2-inch display  7-inch display  The units used on the meters may differ depending on the target region. Hybrid System Indicator Displays hybrid system output or regeneration level (P.90) Multi-information display Presents the driver with a variety of vehicle data (P.92, 102) Displays warning messages in case of a malfunction (P.470)
  • Page 90 2-1. Instrument cluster Clock (P.92) Speedometer Fuel gauge Displays the quantity of fuel remaining in the tank Odometer and trip meter display (P.91) Shift position display (P.220) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C).
  • Page 91 ● When “--” or “E” is displayed, the stop the vehicle in a safe place, system may be malfunctioning. and check the engine after it Take your vehicle to your Toyota has cooled completely. dealer. (P.497) ■ Liquid crystal display...
  • Page 92: Multi-Information Display

    2-1. Instrument cluster Multi-information dis- Changing the instrument play (4.2-inch display) panel light brightness The brightness of the instrument Display and menu icons panel lights can be adjusted. Display ■ The multi-information display presents the driver with a variety of driving-related information. Warning or suggestion/advice pop-up displays are also dis- played in certain situations.
  • Page 93 2-1. Instrument cluster Press and hold: Reset/Dis- ■ Liquid crystal display play customizable items Small spots or light spots may Return to the previous screen appear on the display. This phenom- enon is characteristic of liquid crys- Call sending/receiving and tal displays, and there is no problem history display continuing to use the display.
  • Page 94 2-1. Instrument cluster As a result, the actual distance that the display may not be updated. can be driven may differ from that When “Refuel” is displayed, the displayed. remaining fuel amount is low and When only a small amount of fuel is the distance that can be driven with added to the tank, the display may the remaining fuel cannot be calcu-...
  • Page 95 2-1. Instrument cluster accelerator pedal operation range for the current driving conditions, such as starting off or cruising. This display changes according to situation, such as when starting off or cruising.  Eco score The following 3 Eco driving meth- ods are evaluated in 5 levels: ECO Accelerator Guidance Smooth start-off acceleration, driv-...
  • Page 96 2-1. Instrument cluster Navigation system-linked ■ High display (if equipped) • After the hybrid system is started, Select to display the following the Eco score will not be dis- played until the vehicle speed navigation system-linked infor- exceeds approximately 12 mph mation: (20 km/h).
  • Page 97 2-1. Instrument cluster tem was started or between AWD Control (if equipped) ■ resets). (P.98) Use the displayed information as a reference only. Following items will be dis- played.  “Trip” • “Average Speed”: Displays the average vehicle speed since Torque distribution display hybrid system start Displays the drive status of each...
  • Page 98 2-1. Instrument cluster radio wave conditions. • “Sway Warning” • Tire inflation pressure changes Select to enable/disable the vehicle with temperature. The displayed sway warning. values may also be different from the values measured using a tire • “Sway Sensitivity” pressure gauge.
  • Page 99 Select to change each notification sensor ID codes must be registered method used to notify the driver by a Toyota dealer. For information when the system recognizes regarding changing the registered excess speed and no-entry sign.
  • Page 100 2-1. Instrument cluster Select to enable/disable the rear  seat reminder. Select to change the displayed con-  “Scheduled Maintenance” tent of the following: (P.401) • Display contents Select to reset the scheduled main- Select to display/not display the tenance information (maintenance AWD control (if equipped) and required message and distance energy monitor.
  • Page 101 2-1. Instrument cluster To select a response to a dis- ● If a warning message is displayed, operation of the settings display played suggestion, use the will be suspended. meter control switches. ■ Pop-up displays Suggestion to turn off the ■...
  • Page 102: Display)

    2-1. Instrument cluster Multi-information dis- ■ Liquid crystal display play (7-inch display) Small spots or light spots may appear on the display. This phenom- enon is characteristic of liquid crys- Display and menu icons tal displays, and there is no problem continuing to use the display.
  • Page 103 2-1. Instrument cluster Press and hold: Reset/Dis- start. play customizable items Driving range Return to the previous screen Displays the driving range with remaining fuel. Call sending/receiving and This distance is computed based history display on your average fuel consumption. Linked with the hands-free system, As a result, the actual distance that sending or receiving call is dis-...
  • Page 104 2-1. Instrument cluster status. • Elapsed time After start: Displays elapsed time since hybrid system start After reset: Displays elapsed time since the display was reset Average fuel economy Displayed item (listed below) can be changed on the fuel economy type screen of .
  • Page 105 2-1. Instrument cluster Displayed as a blue bar, and rep- resents an estimated suitable High accelerator pedal operation range for the current driving conditions, • After the hybrid system is started, such as starting off or cruising. the Eco score will not be dis- played until the vehicle speed This display changes according to exceeds approximately 12 mph...
  • Page 106 2-1. Instrument cluster played on the multi-information dis- ■ The ECO Accelerator Guid- play. (P.114) ance/Eco score will not operate when Audio system-linked dis- The ECO Accelerator Guidance/Eco score will not operate in the follow- play ( ing situations: ● The Hybrid System Indicator is not Select to enable selection of an operating.
  • Page 107 2-1. Instrument cluster Maximum G-force course Settings display ( This item is linked with the G-force Changing settings display and the course of the past ■ movement of the ball is displayed. Use the meter control switches Press and hold to reset the on the steering wheel to change record.
  • Page 108 2-1. Instrument cluster ing sensitivity. Select to enable/disable the Intui- tive parking assist.  PCS (Pre-Collision Sys- Press and hold to change the tem) (P.249) settings of the following item: Press to enable/disable the • “Volume” pre-collision system. Select to set the volume of the •...
  • Page 109 Select to change each notification sensor ID codes must be registered level used to notify the driver when by a Toyota dealer. For information the system recognizes a speed limit regarding changing the registered sign.
  • Page 110 2-1. Instrument cluster  Multi-information display off Select to enable/disable the rear seat reminder. Displays a blank screen.  “Scheduled Maintenance”  Default setting (P.401) Select to reset the meter display Select to reset the scheduled main- settings to the default setting. tenance information (maintenance Vehicle functions and set- ■...
  • Page 111 2-1. Instrument cluster the “AUTO” position, a sugges- WARNING tion message will be displayed ■ Cautions during setting up asking if you wish to turn the the display headlights off. As the hybrid system needs to be operating during setting up the To turn the headlights off, select display, ensure that the vehicle is “Yes”.
  • Page 112: Head-Up Display

    2-1. Instrument cluster Head-up display : If equipped The head-up display is linked to the meters and navigation system (if equipped) and projects a variety of information in front of the driver, such as the current vehicle speed and route guidance to a set destination.
  • Page 113 2-1. Instrument cluster Driving assist system status display area (P.116) Message display area (P.116) The following pop-up displays will be displayed in certain situations: • Warning/message • Hands-free system status • Audio system operation status ● Do not continuously look at the ■...
  • Page 114 2-1. Instrument cluster adjust the angle of the head-up dis- Using the head-up display play. Changing settings of the ■ ■ Enabling/disabling of the head-up display head-up display Select on the multi-informa- If the head-up display is disabled, it will remain disabled when the power tion display (P.526) and then switch is turned off then back to ON.
  • Page 115 2-1. Instrument cluster approximately 10 seconds) NOTICE  When the low outside tem- ■ When changing the settings perature indicator is flashing of the head-up display To prevent 12-volt battery dis- Displayed content is the same charge, ensure that the hybrid as that displayed on the system is operating while the multi-information display.
  • Page 116 2-1. Instrument cluster : Master warning icon ■ Street name display (vehicles with a navigation system) Displayed when a warning mes- Depending on the situation, such as sage is displayed on the multi-infor- when no information is available in mation display. (P.470) map data, etc., the street names of an intersection may not be dis- : Information icon...
  • Page 117: Energy Monitor/Consumption Screen

    The item will display: The energy monitor be displayed after the pop-up dis- or consumption screen can play is no longer displayed. be displayed and operated on the Toyota multi-opera- tion touch. System components Audio system screen Multi-information display Meter control switches...
  • Page 118 “Energy”. Audio Plus (vehicles with 12.3-inch display   Data Communication Mod- Select Toyota multi-oper- ule) or Premium Audio ation touch (P.334). Press the “MENU” button. Select “Energy”. Select “Info” on the “Menu” The screen position can also be screen.
  • Page 119 2-1. Instrument cluster When the vehicle is powered by the gasoline engine (Example: 8-inch dis- play) 2WD/AWD models HIGHLANDER HV_U...
  • Page 120 2-1. Instrument cluster When the vehicle is charging the hybrid battery (traction battery) (Example: 8-inch display) 2WD/AWD models AWD models only HIGHLANDER HV_U...
  • Page 121 2-1. Instrument cluster When there is no energy flow (Example: 8-inch display) 2WD/AWD models These images are examples only, Press of the meter and may vary slightly from actual control switch to select the conditions. energy monitor display. Hybrid battery (traction bat- ...
  • Page 122 2-1. Instrument cluster When the vehicle is powered by the electric motor (traction motor) (Exam- ple: 7-inch display) 2WD/AWD models AWD models only When the vehicle is powered by both the gasoline engine and the electric motor (traction motor) (Example: 7-inch display) 2WD/AWD models AWD models only When the vehicle is powered by the gasoline engine (Example: 7-inch dis-...
  • Page 123 2-1. Instrument cluster When the vehicle is charging the hybrid battery (traction battery) (Example: 7-inch display) 2WD/AWD models AWD models only When there is no energy flow (Example: 7-inch display) 2WD/AWD models HIGHLANDER HV_U...
  • Page 124 If a screen other than “Trip Informa- tion” is displayed, select “Trip Infor- mation”. 12.3-inch display  Select Toyota multi-oper- ation touch (P.334). Select “TripInfo.”. The screen position can also be changed by select a desired infor- mation in full screen.
  • Page 125 Update the latest fuel consumption by selecting “Update” to measure 12.3-inch display  the current fuel consumption again. Select Toyota multi-oper- ■ Resetting the data ation touch (P.334). The fuel consumption data can be deleted by selecting “Clear”. Select “History”.
  • Page 126 ■ Displays the average fuel con- Display the vehicle information sumption and regenerated on the Toyota multi-operation energy for the past 10 minutes touch (P.334), and then select in 1 minute intervals, as well as the button to display the desired the cruising range.
  • Page 127: Before Driving

    Before driving 3-1. Key information Keys ......3-2. Opening, closing and locking the doors Side doors ....Back door....Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Driving position memory ........Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
  • Page 128: Key Information Keys

    The number of keys already regis- that the buttons are not likely to be tered to the vehicle can be con- pressed accidentally. Pressing a firmed. Ask your Toyota dealer for button may cause the electronic key details. to emit radio waves that could inter- fere with the operation of the air- ■...
  • Page 129 ■ Carrying the electronic key have not had a new electronic key on your person registered, ask your Toyota dealer to Carry the electronic key 3.9 in. check if an unknown electronic key (10 cm) or more away from elec- (other than those in your posses- tric appliances that are turned on.
  • Page 130 3-1. Key information : If equipped ■ Theft deterrent panic mode When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle.
  • Page 131: 3-2. Opening, Closing And Locking The Doors

    Grip the driver’s door handle : This setting must be customized to unlock the door. Holding at your Toyota dealer. the driver’s door handle for : If equipped approximately 2 seconds unlocks all the doors. Grip ■...
  • Page 132 3-2. Opening, closing and locking the doors continuously, release the buttons, ■ Operation signals wait for at least 5 seconds, and A buzzer sounds and the emer- repeat step 2.) gency flashers flash to indicate that the doors have been Multi-informa- Unlocking func- locked/unlocked.
  • Page 133 3-2. Opening, closing and locking the doors ■ Conditions affecting the opera- ■ Customization tion of the smart key system or Some functions can be customized. wireless remote control (P.526) P.147 ■ If the smart key system or the WARNING wireless remote control does To prevent an accident ■...
  • Page 134 3-2. Opening, closing and locking the doors ■ Open door warning buzzer Unlocking and locking the If a door or the hood is not fully doors from the inside closed, a buzzer will sound when the vehicle speed reaches 3 mph (5 Door lock switches ■...
  • Page 135: Back Door

    3-2. Opening, closing and locking the doors Back door Function Operation All doors are auto- matically locked The back door can be Speed linked when vehicle locked/unlocked and door locking speed is approxi- opened/closed by the fol- function mately 12 mph (20 lowing procedures.
  • Page 136 Do not attach any weather as it may move accessories other than genuine abruptly in strong wind. Toyota parts to the back door. ● The back door may suddenly shut if it is not opened fully while Unlocking and locking the on a steep incline.
  • Page 137 3-2. Opening, closing and locking the doors Unlocks all the doors Opening/closing the back ■ door using the power back The doors cannot be unlocked for 3 door switch on the instru- seconds after the doors are locked. ment panel Locks all the doors Check that the door is securely Press and hold the switch.
  • Page 138 3-2. Opening, closing and locking the doors Pressing the switch while the back door is opening/closing will stop the operation. Pressing the switch again will open the back door. Opening/closing the back ■ door using the kick sensor (vehicles with a Hands Free Power Back Door) Opening/closing the back ■...
  • Page 139 3-2. Opening, closing and locking the doors detection area (P.146) If kick operation is performed while the back door is opening/closing, Perform a kick operation by the back door will stop the opera- moving your foot to within tion. Perform a kick operation again will operate the back door in the approximately 3.9 in.
  • Page 140 3-2. Opening, closing and locking the doors ■ Jam protection function jam protection function, etc., while the back door is automatically Sensors are installed on the right closing after a door reserve lock and left sides of the power back operation is performed, the door door.
  • Page 141 3-2. Opening, closing and locking the doors station, large display, airport or electrically heated road, or fluo- other facility that generates strong rescent light. radio waves or electrical noise. ● When the vehicle is near a TV ● When a large amount of water is tower, electric power plant, radio applied to the rear bumper, such station, large display, airport or...
  • Page 142 3-2. Opening, closing and locking the doors ● If the power back door system is WARNING disabled while the power back ■ Back door closer door is operating, the back door will stop operating. The back In the event that the back door ●...
  • Page 143 Power Back Door if there is little caught and injured. Do not space under the rear bumper. attach any accessories other than genuine Toyota parts to the back door. NOTICE ■ Jam protection function ■...
  • Page 144 Do not apply excessive force to sensor operates. If it does not the power back door while the operate, have the vehicle back door is operating. inspected by your Toyota dealer. ● Take care not to damage the ● Do not subject the kick sensor...
  • Page 145 3-2. Opening, closing and locking the doors Adjusting the open posi- tion of the back door The open position of the power back door can be adjusted. Stop the power back door at the desired position. ■ When setting the open position (P.137) of the back door by the multi-information display...
  • Page 146: Smart Key System

    3-2. Opening, closing and locking the doors ■ Effective range (areas within Smart key system which the electronic key is detected) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
  • Page 147 3-2. Opening, closing and locking the doors wireless remote control or the Correction Situation mechanical key, to unlock the procedure doors. An attempt was Close all of ■ Turning an electronic key to battery-saving mode made to lock the the doors vehicle while a door and lock the When battery-saving mode is set,...
  • Page 148 3-2. Opening, closing and locking the doors • Metallic wallets or bags side the cabin and the door will • Coins become lockable from the outside, • Hand warmers made of metal possibly trapping the electronic • Media such as CDs and DVDs key inside the vehicle.
  • Page 149 3-2. Opening, closing and locking the doors tery-saving mode to disable the rectly and the system may not oper- smart key system. (P.147) ate properly. (The alarm may go off accidentally, or the door lock pre- ● If the electronic key is inside the vention may not operate.) vehicle and a door handle becomes wet during a car wash, a...
  • Page 150 3-2. Opening, closing and locking the doors ■ Certification for the smart key system For vehicles sold in the U.S.A.  HIGHLANDER HV_U...
  • Page 151 3-2. Opening, closing and locking the doors For vehicles sold in Canada  HIGHLANDER HV_U...
  • Page 152 Radio waves could have unexpected effects on the operation of such medical devices. Ask your Toyota dealer for details on disabling the entry function. HIGHLANDER HV_U...
  • Page 153: Adjusting The Seats

    3-3. Adjusting the seats Front seats 3-3.Adjusting the seats Vertical height adjustment switch (driver’s side only) Lumbar support adjustment Adjustment procedure switch (driver’s side only) Manual seat  ■ When adjusting the seat Take care when adjusting the seat so that the head restraint does not touch the ceiling.
  • Page 154: Rear Seats

    3-3. Adjusting the seats Rear seats WARNING ● Manual seat only: After adjust- ing the seat, make sure that the The seat position and seat- seat is locked in position. back angle can be adjusted, and the seatback can be folded by operating a seat- back angle adjustment lever.
  • Page 155 3-3. Adjusting the seats Adjustment procedure WARNING ■ When folding the rear seat- Second seats ■ backs down 8-seat models Observe the following precau-  tions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving.
  • Page 156 3-3. Adjusting the seats 7-seat models  Moving a second seat for third seat access When entering/exiting the ■ vehicle Pull the seatback angle adjust- ment lever to tilt the seatback forward and then slide the seat forward. Make sure that the second seat is free of passengers and obstruc- tions before operating the lever.
  • Page 157 3-3. Adjusting the seats Stow the second seat belt arately. buckles. Pass the outer seat belts through the seat belt hangers and secure the seat belt Pull the seatback folding plates. lever to unlock the seatback. This prevents the shoulder belts The seatback will be folded from being damaged.
  • Page 158 3-3. Adjusting the seats Returning the second seats from being damaged. ■ Lift up the seatbacks until they lock. Remove the secured seat belts from the seat belt hangers before using them. Lower the center head restraint to the lowest posi- tion.
  • Page 159: Driving Position Memory

    3-3. Adjusting the seats Driving position mem- : If equipped This feature automatically adjusts the driver’s seat, outside rear view mirrors and head-up display (if equipped) to suit your pref- From outside  erences. Pull the straps and raise the seat- backs until they lock.
  • Page 160 3-3. Adjusting the seats to recall until the buzzer ten. sounds. ■ Seat positions that can be memorized ■ To stop the position recall oper- The adjusted positions other than ation part-way through the position adjusted by lumbar sup- Perform any of the following opera- port switch can be recorded.
  • Page 161 3-3. Adjusting the seats If 2 or more keys are in the vehicle, the buzzer sounds continuously for approximately 3 seconds. the driving position cannot be recorded properly. Recall procedure ■ Check that the shift lever is in Make sure that the doors are locked before recalling the driv- ing position.
  • Page 162: Head Restraints

    3-3. Adjusting the seats Second seats ■ Head restraints Head restraints are provided for all seats. WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Pull the head restraints up.
  • Page 163 3-3. Adjusting the seats Second seats Make sure that the head restraints  are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the third center seat head restraint Always raise the head restraint one level from the stowed position when using.
  • Page 164 3-3. Adjusting the seats Second seats  Third center seat  HIGHLANDER HV_U...
  • Page 165: Adjusting The Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
  • Page 166: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors Inside rear view mir- Anti-glare function Manual anti-glare inside rear  view mirror : If equipped Reflected light from the head- The rear view mirror’s posi- lights of vehicles behind can be tion can be adjusted to reduced by operating the lever.
  • Page 167: Digital Rearview Mirror

    3-4. Adjusting the steering wheel and mirrors Digital Rearview Mir- : If equipped The Digital Rearview Mirror is a system that uses the camera on the rear of the vehicle and displays its image on the display of the ■ To prevent sensor error (vehi- Digital Rearview Mirror.
  • Page 168 3-4. Adjusting the steering wheel and mirrors Changing modes WARNING • Change to digital mirror mode Operate the lever to change and adjust the display settings. between digital mirror mode and ● As the range of the image dis- optical mirror mode. played by the Digital Rearview Mirror is different from that of the optical mirror, make sure to...
  • Page 169 Press the menu button. ror mode, the system may be mal- functioning. The symbol will disappear in a few seconds. Oper- ate the lever, change to optical mir- ror mode and have the vehicle inspected by your Toyota dealer. HIGHLANDER HV_U...
  • Page 170 3-4. Adjusting the steering wheel and mirrors The icons will be displayed. Icons Settings Select to zoom in/out the displayed image. Select to enable/disable the automatic anti-glare func- tion. Responding to the bright- ness of the headlights of vehicles behind, the Press the menu button reflected light is automati- repeatedly and select the...
  • Page 171 If the driver continues using the cover them. Digital Rearview Mirror while smoke or odor comes from the mirror, it may result in fire. Stop using the system immediately and contact your Toyota dealer. HIGHLANDER HV_U...
  • Page 172 3-4. Adjusting the steering wheel and mirrors Cleaning the Digital Rear- NOTICE view Mirror ■ To prevent the Digital Rear- view Mirror from malfunction- Cleaning the mirror surface ■ ● Do not use detergents, such as If the mirror surface is dirty, the thinner, benzene, and alcohol to image on the display may be dif- clean the mirror.
  • Page 173 If this happens, have the vehicle inspected by your Toyota dealer as soon as possible. If you notice any symptoms If you notice any of the following symptoms, refer to the following table for the likely cause and the solution.
  • Page 174 3-4. Adjusting the steering wheel and mirrors Symptom Likely cause Solution Clean the mirror surface The mirror surface is dirty. gently, using a soft dry cloth. Change to optical mirror mode. Sunlight or headlights are (If the light is coming shining directly into the Dig- through the moon roof or ital Rearview Mirror.
  • Page 175 The camera or its surround- alignment. mode and have the vehi- ing area has received a cle inspected by your strong impact. Toyota dealer. The display is dim Change to optical mirror is dis- The system may be mal- mode and have the vehi- played.
  • Page 176 Mirror will turn off.) pear even though the mirror is cool, have the vehicle inspected by your Toyota dealer. Change to optical mirror mode and have the vehi- cle inspected by your Toyota dealer. The lever cannot be...
  • Page 177: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors To adjust the mirror, operate Outside rear view mir- the switch. rors The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. WARNING ■ Important points while driving Observe the following precautions while driving.
  • Page 178 3-4. Adjusting the steering wheel and mirrors mirror angle at a desired position with the shift lever in R. The adjusted angle will be memo- rized and the mirror will automati- cally tilt to the memorized angle whenever the shift lever is shifted to R from next time.
  • Page 179 3-5. Opening, closing the windows and moon roof between the window and the win- Power windows 3-5.Opening, closing the windows and moon roof dow frame while the window is clos- ing, window movement is stopped and the window is opened slightly. Opening and closing the ■...
  • Page 180 Check to make sure that all pas- be fully closed or opened, have the sengers do not have any part of vehicle inspected by your Toyota their body in a position where it dealer. could be caught when a window is being operated.
  • Page 181 3-5. Opening, closing the windows and moon roof WARNING ■ Jam protection function Never use any part of your body ● to intentionally activate the jam protection function. ● The jam protection function may not work if something gets jammed just before the window is fully closed.
  • Page 182: Moon Roof

    The moon roof can be opened Tilting up and down ■ using the wireless remote control. (P.131) : These settings must be custom- ized at your Toyota dealer. ■ When the moon roof does not close normally Perform the following procedure: ●...
  • Page 183 Press and hold the “CLOSE” even after performing the above procedure correctly, have the vehi- switch. cle inspected by your Toyota dealer. The moon roof will close, reopen ■ Moon roof open warning buzzer and pause for approximately 10 sec- onds.
  • Page 184 3-5. Opening, closing the windows and moon roof ● The jam protection function may WARNING not work if something gets ● Check to make sure that all pas- caught just before the moon sengers do not have any part of roof is fully closed.
  • Page 185: Panoramic Moon Roof

    3-5. Opening, closing the windows and moon roof half-open position. Panoramic moon roof To stop operation partway, quickly slide and release the switch again. : If equipped Use the overhead switches to operate the panoramic moon roof and electronic sunshade. Operating the panoramic moon roof Opening and closing the...
  • Page 186 If an object is detected between the above procedure correctly, have the panoramic moon roof and the frame vehicle inspected by your Toyota in the following situations, travel is dealer. stopped and the panoramic moon roof opens slightly: ■...
  • Page 187 ● Do not allow any passengers to your Toyota dealer. put their hands or heads outside the vehicle while it is moving. ■ Panoramic moon roof open warning buzzer ●...
  • Page 188 3-5. Opening, closing the windows and moon roof ■ To prevent burns or injuries WARNING Do not touch the area between ● Check to make sure that all pas- the underside of the panoramic sengers do not have any part of moon roof and the electronic sun- their body in a position where it shade.
  • Page 189: Driving

    Driving assist systems washer............4-4. Refueling 4-6. Driving tips Opening the fuel tank cap Hybrid vehicle driving tips ..............4-5. Using the driving support Winter driving tips..systems Utility vehicle precautions Toyota Safety Sense 2.0 ..............HIGHLANDER HV_U...
  • Page 190 4-1. Before driving Set the parking brake Driving the vehicle 4-1.Before driving (P.224), and shift the shift lever to P (P.220). The following procedures Press the power switch to should be observed to stop the hybrid system. ensure safe driving: Lock the door, making sure that you have the electronic Driving procedure...
  • Page 191 Trail Mode is within the ECO Accelerator Guid- turned on. ance range. By keeping the vehi- ■ Breaking in your new Toyota cle within the ECO Accelerator Guidance range, the “Cruise” To extend the life of the vehicle, score will increase.
  • Page 192 4-1. Before driving ■ Operating your vehicle in a for- ● The driver should pay extra eign country attention to pedestrians when Comply with the relevant vehicle the vehicle is powered only by registration laws and confirm the the electric motor (traction availability of the correct fuel.
  • Page 193 4-1. Before driving ● After driving through a puddle, WARNING lightly depress the brake pedal ● Always check that all passen- to make sure that the brakes gers’ arms, heads or other parts are functioning properly. Wet of their body are not outside the brake pads may prevent the vehicle.
  • Page 194 Have the brake pads checked and Doing so may result in the fol- replaced by your Toyota dealer as lowing: soon as possible. • Gas may leak from a cigarette Rotor damage may result if the...
  • Page 195 4-1. Before driving ● If the electronically controlled WARNING brake system does not operate, ● Always apply the parking brake, do not follow other vehicles shift the shift lever to P, stop the closely and avoid hills or sharp hybrid system and lock the vehi- turns that require braking.
  • Page 196 4-1. Before driving ● Short in electrical components NOTICE ■ When parking the vehicle ● Engine damage caused by water immersion Always set the parking brake and shift the shift lever to P. Failure to In the event that you drive on a do so may cause the vehicle to flooded road and the vehicle is move or the vehicle may acceler-...
  • Page 197: Cargo And Luggage

    4-1. Before driving 750 (5  150) = 650 lbs.) Cargo and luggage (5) Determine the combined weight of luggage and cargo Take notice of the following being loaded on the vehicle. information about storage That weight may not safely precautions, cargo capacity exceed the available cargo and and load.
  • Page 198 4-1. Before driving be C lb. (kg) as follows: ● Receptacles containing gaso- line lb. (kg) - A lb. (kg) = C ● Aerosol cans (kg) ■ Storage precautions : A =Weight of people Observe the following precau- : B =Total load capacity tions.
  • Page 199 4-1. Before driving WARNING NOTICE ● Even if the total load of occu- ■ When loading cargo pant’s weight and the cargo Be careful not to scratch the sur- load is less than the total load face of the moon roof or pan- capacity, do not apply the load oramic moon roof.
  • Page 200: Vehicle Load Limits

    4-1. Before driving Vehicle load limits WARNING ■ Overloading the vehicle Vehicle load limits include Do not overload the vehicle. It may not only cause damage to total load capacity, seating the tires, but also degrade steer- capacity, trailer weight rat- ing and braking ability, resulting in ing and cargo capacity.
  • Page 201: Trailer Towing

    4-1. Before driving Trailer towing Toyota warranties do not apply to damage or mal- function caused by towing a Your vehicle is designed pri- trailer for commercial pur- marily as a passen- poses. ger-and-load-carrying vehicle. Towing a trailer can Contact your Toyota dealer...
  • Page 202 • Check the tires of the vehicle and transmission, rear differential or the trailer. wheel bearing), Toyota recommends • Check the load in the trailer. that you do not tow a trailer until the Make sure the load has not vehicle has been driven for over 500 shifted.
  • Page 203 ■ When towing a trailer speed of which you experience the instability. Toyota recommends trailers with brakes that conform to any appli- ● Do not make jerky, abrupt or cable federal and state/provincial sharp turns.
  • Page 204 ● If the gross trailer weight The maximum allowable gross exceeds unbraked TWR, trailer brakes are required. Toyota rec- vehicle weight. The gross vehi- ommends trailers with brakes cle weight is the total weight of that conform to all applicable the vehicle.
  • Page 205 4-1. Before driving Rear GAWR TWR (Trailer Weight Rating) ■ The maximum allowable gross trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming Without brakes base vehicle with one driver, Tongue Weight...
  • Page 206 4-1. Before driving Certification Label. (P.504)  If the gross trailer weight is over 2000 lb. (900 kg), a sway  If the gross trailer weight is control device with sufficient over the unbraked TWR, capacity is required. trailer service brakes are required.
  • Page 207 When installing a trailer hitch vehicle. For details, contact your Use only the position recom- Toyota dealer. mended by your Toyota dealer. Do not install the trailer hitch on  If you wish to install a trailer the bumper; this may cause body hitch, contact your Toyota damage.
  • Page 208 4-1. Before driving Positions for towing hitch Typical trailer ball Trailer class size ball 2 5/16 in. II and III 2 in. 1 7/8 in. Weight carrying ball position: 50.7 in. (1289 mm) Connecting trailer lights Trailer ball load rating Matches or exceeds the gross Use the wire harness stored in trailer weight rating of the trailer.
  • Page 209 If a trailer light does not come on posted towing speed limit. due to the activation of the auto cur- rent cut function, the light system  Toyota recommends that the will need to be reset. vehicle-trailer speed limit is 65 Follow the reset procedure shown mph (104 km/h) on a flat, below.
  • Page 210 4-1. Before driving requires practice. Grip the turn, in cross winds, on wet or bottom of the steering wheel slippery surfaces, etc. Increasing vehicle speed can and move your hand to the left to move the trailer to the destabilize the trailer. left.
  • Page 211 4-1. Before driving or steep grade. If the engine If the parking brake is in man- coolant temperature gauge ual mode, release the park- ing brake. (P.224) indicates overheating, imme- diately turn off the air condi- Release the brake pedal, and tioning (if in use), pull your slowly pull or back away from vehicle off the road and stop...
  • Page 212: Dinghy Towing

    4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to ■ your vehicle Do not tow your vehicle with the 4 wheels on the ground.
  • Page 213: Driving Procedures

    Check that the shift lever is in ● The immobilizer system may not have been deactivated. (P.79) Contact your Toyota dealer. Firmly depress the brake ● If a message related to start-up is pedal. shown on the multi-information display, read the message and fol- low the instructions.
  • Page 214 In the event that the “READY” indi- cator does not come on even after performing the proper procedures for starting the vehicle, contact your Toyota dealer immediately. ■ If the hybrid system is malfunc- tioning P.78 HIGHLANDER HV_U...
  • Page 215 If the hybrid system becomes diffi- the brake pedal is depressed or if cult to start, have your vehicle the shift lever is in a position other checked by your Toyota dealer than P. immediately. ● After the vehicle is parked, if the ■...
  • Page 216 4-2. Driving procedures WARNING ● To restart the hybrid system after performing an emergency shutdown, shift the shift lever to N and then press the power switch. ■ When parking Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions.
  • Page 217 4-2. Driving procedures multi-information display are not entirely prevent 12-volt battery discharge. Do not leave the vehicle off. with the power switch in ACC or ON for long periods of time when the NOTICE hybrid system is not operating. ■ To prevent 12-volt battery dis- charge NOTICE...
  • Page 218: Ev Drive Mode

    4-2. Driving procedures EV drive mode ■ Situations in which EV drive mode cannot be turned on It may not be possible to turn EV In EV drive mode, electric drive mode on in the following situa- power is supplied by the tions.
  • Page 219 4-2. Driving procedures ■ Automatic cancelation of EV may be displayed. Use the EV drive drive mode mode when it becomes available. When driving in EV drive mode, the ■ If “EV Mode Deactivated” is gasoline engine may automatically shown on the multi-information restart in the following situations.
  • Page 220: Hybrid Transmission

    4-2. Driving procedures Hybrid transmission WARNING ■ When driving on slippery road surfaces Select the shift position Be careful of downshifting and depending on your purpose sudden acceleration, as this could and situation. result in the vehicle skidding to the side or spinning. Shift position purpose and functions NOTICE...
  • Page 221 Have the vehicle override button is pressed and the inspected by your Toyota dealer shift lever is shifted out of P, the immediately. vehicle may suddenly start, possi-...
  • Page 222 S This may indicate a malfunction in the hybrid transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the hybrid transmission will operate in the same manner as when the shift lever is in D.)
  • Page 223: Turn Signal Lever

    4-2. Driving procedures burned out. Turn signal lever Operating instructions Right turn Lane change to the right (move the lever partway and release it) The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release it) The left hand signals will flash 3 times.
  • Page 224: Parking Brake

    4-2. Driving procedures Pull and hold the parking brake Parking brake switch if an emergency occurs and it is necessary to operate the park- The parking brake can be ing brake while driving. set or released automati- Push the switch to release cally or manually.
  • Page 225 Have the vehicle inspected by your Toyota dealer immediately. ■ Parking brake operation sound When the parking brake operates, a motor sound (whirring sound) may be heard.
  • Page 226 If a warning mes- sage is shown on the multi-informa- Have the vehicle inspected by tion display, read the message and your Toyota dealer immediately if follow the instructions. this occurs. ■ If the brake system warning light comes on P.460...
  • Page 227: Brake Hold

    4-2. Driving procedures ● The parking brake is engaged. Brake Hold If any of the conditions above are detected when the brake hold sys- The brake hold system tem is enabled, the system will turn off and the brake hold standby indi- keeps the brake applied cator light will go off.
  • Page 228 Have which would cause the vehicle to the vehicle inspected at your Toyota move. When operating the power dealer. switch, depress the brake pedal, ■...
  • Page 229: 4-3. Operating The Lights And Wipers

    4-3. Operating the lights and wipers lights listed above (except Headlight switch 4-3.Operating the lights and wipers daytime running lights) turn The headlights can be oper- (U.S.A.) Off ated manually or automati- cally. ■ Daytime running light system ● Vehicles without projector head- Operating instructions lights: The daytime running lights illuminate using the same lights as...
  • Page 230 4-3. Operating the lights and wipers ■ Headlight control sensor interfere with other road users. ■ Light reminder buzzer A buzzer sounds when the power switch is turned off or turned to ACC and the driver’s door is opened while the lights are turned on. ■...
  • Page 231 4-3. Operating the lights and wipers the tire’s angle as controlled by NOTICE steering input. ■ To prevent 12-volt battery dis- AFS operates at speeds of 6 mph charge (10 km/h) or higher. Do not leave the lights on longer than necessary when the hybrid system is off.
  • Page 232: Automatic High Beam

    4-3. Operating the lights and wipers Push the lever away from Automatic High Beam you with the headlight switch in the position. The Automatic High Beam uses a camera sensor The Automatic High Beam indicator located behind the upper will come on when the system is operating.
  • Page 233 4-3. Operating the lights and wipers from around a curve • When driving in inclement weather • When the vehicle is cut in front of (heavy rain, snow, fog, sand- by another vehicle storms, etc.) • When vehicles ahead cannot be •...
  • Page 234 4-3. Operating the lights and wipers ■ Temporarily lowering sensor sensitivity The sensitivity of the sensor can be temporarily lowered. Turn the power switch off while the following conditions are met. ● The headlight switch is in ● The headlight switch lever is in Switching to the high ■...
  • Page 235: Fog Light Switch

    4-3. Operating the lights and wipers Fog light switch Windshield wipers and washer : If equipped The fog lights secure excel- Operating the lever can lent visibility in difficult driv- switch between automatic ing conditions, such as in operation and manual oper- rain and fog.
  • Page 236 4-3. Operating the lights and wipers Rain-sensing windshield wip-  (U.S.A.) or (Canada) Low speed operation When “AUTO” is selected, the (U.S.A.) or (Canada) wipers will operate automatically High speed operation when the sensor detects falling rain. The system automatically (U.S.A.) or (Canada) adjusts wiper timing in accor-...
  • Page 237 4-3. Operating the lights and wipers the sensor sensitivity can be ■ Effects of vehicle speed on wiper operation adjusted by turning the switch Vehicle speed affects the intermit- ring. tent wiper interval. ■ Raindrop sensor (vehicles with rain-sensing windshield wipers) The raindrop sensor judges the ●...
  • Page 238: Rear Windshield Wiper And Washer

    (U.S.A.) or (Canada) overheat. Normal operation ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. HIGHLANDER HV_U...
  • Page 239 4-3. Operating the lights and wipers NOTICE ■ When the washer fluid tank is empty Do not operate the switch continu- ally as the washer fluid pump may overheat. Washer/wiper dual operation Pushing the lever operates the wiper and washer. The wiper will automatically operate a couple of times after the washer squirts.
  • Page 240: 4-4. Refueling

    4-4. Refueling Opening the fuel tank 4-4.Refueling ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal sur- face to discharge any static electricity. It is important to dis- The fuel tank of your vehicle charge static electricity before has a special structure, refueling because sparks result-...
  • Page 241 4-4. Refueling filler door opener. WARNING ● Do not top off the fuel tank. NOTICE ■ Refueling ● Finish refueling within 30 min- utes. If more than 30 minutes passes, the internal valve closes. In this condition, fuel may spill out if you continue to Turn the fuel tank cap slowly refuel the vehicle.
  • Page 242 Do not use anything but a genu- lock is not pushed by the fuel noz- ine Toyota fuel tank cap designed zle boot, etc., as this may cause a for your vehicle. Doing so may...
  • Page 243: Using The Driving Support Systems

    Toyota Safety Sense 4-5.Using the driving support systems WARNING ■ Toyota Safety Sense 2.0 The Toyota Safety Sense 2.0 is designed to operate under the The Toyota Safety Sense 2.0 assumption that the driver will consists of the following drive safely, and is designed to...
  • Page 244 In the following cases, the radar Otherwise, the radar sensor may sensor must be recalibrated. not operate properly, possibly Contact your Toyota dealer for leading to an accident resulting in details. death or serious injury. • When the radar sensor or front grille are removed and installed, ●...
  • Page 245 Also, do not touch the lens. If the lens is dirty or damaged, contact your Toyota dealer. ● Do not subject the front camera to a strong impact. From the top of the windshield ●...
  • Page 246 4-5. Using the driving support systems ■ Certification Except for vehicles sold in Canada  For vehicles sold in Canada  HIGHLANDER HV_U...
  • Page 247 In the following situations, perform the actions specified in the table. When the normal operating conditions are detected, the message will disappear and the system will become operational. If the message does not disappear, contact your Toyota dealer. Situation Actions...
  • Page 248 If the message does not disappear, contact your Toyota dealer. • When the temperature around the radar sensor is outside of the opera- tional range, such as when the vehicle is in the sun or in an extremely cold environment •...
  • Page 249: Pcs (Pre-Collision System)

    4-5. Using the driving support systems PCS (Pre-Collision Sys- System functions tem) Pre-collision warning ■ When the system determines The pre-collision system that the possibility of a frontal uses a radar sensor and collision is high, a buzzer will front camera to detect sound and a warning message objects (P.249) in front of will be displayed on the...
  • Page 250 4-5. Using the driving support systems ■ Pre-collision braking WARNING ● When the pre-collision braking ■ Limitations of the pre-colli- function is operating, a large sion system amount of braking force will be ● The driver is solely responsible applied. for safe driving.
  • Page 251 4-5. Using the driving support systems Changing settings of the WARNING pre-collision system ● When your vehicle is towing another vehicle Enabling/disabling the ■ ● When transporting the vehicle pre-collision system via truck, boat, train or similar means of transportation The pre-collision system can be ●...
  • Page 252 4-5. Using the driving support systems Middle This is the default setting. Late Early ■ Operational conditions The pre-collision system is enabled and the system determines that the pos- sibility of a frontal collision with a detected object is high. Each function is operational at the following speed ●...
  • Page 253 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Approx. 7 to 110 mph Approx. 7 to 110 mph Vehicles (10 to 180 km/h) (10 to 180 km/h) Bicyclists and pedestri- Approx. 7 to 50 mph (10 Approx.
  • Page 254 4-5. Using the driving support systems (road sign, billboard, etc.) • When there are patterns or paint in front of your vehicle that may be • When approaching an electric toll mistaken for a detectable object gate barrier, parking area barrier, •...
  • Page 255 4-5. Using the driving support systems swerving, acceleration or deceler- rear end, such as a low bed trailer ation) • When your vehicle approaches a detectable object rapidly • When a detectable object is not directly in front of your vehicle •...
  • Page 256 4-5. Using the driving support systems • When driving through steam or sively worn, improper tire inflation smoke pressure, etc.) • When the surrounding area is dim, • When the vehicle is being driven such as at dawn or dusk, or while on a gravel road or other slippery at night or in a tunnel, making a surface...
  • Page 257: Lta (Lane Tracing Assist)

    4-5. Using the driving support systems LTA (Lane Tracing WARNING Assist) ■ Before using LTA system Do not rely solely upon the LTA ● system. The LTA system does When driving on highways not automatically drive the vehi- and freeways with white cle or reduce the amount of (yellow) lane lines, this attention that must be paid to...
  • Page 258 ● Vehicle is being driven around a sharp curve. ● If your windshield needs repairs, contact your Toyota dealer. ■ Conditions in which functions may not operate properly In the following situations, the functions may not operate prop- erly and the vehicle may depart from its lane.
  • Page 259 4-5. Using the driving support systems ● The vehicle is driven in an area WARNING without white (yellow) lines, ● Objects or patterns that could such as in front of a tollgate or be mistaken for white (yellow) checkpoint, or at an intersec- lines are present on the side of tion, etc.
  • Page 260 4-5. Using the driving support systems ing is displayed on the WARNING multi-information display, and a ● The traffic lane is excessively warning buzzer will sound to narrow or wide. alert the driver. ● The vehicle is extremely tilted When the warning buzzer sounds, due to carrying heavy luggage or having improper tire pres- check the area around your vehicle...
  • Page 261 4-5. Using the driving support systems tem provides assistance as nec- Vehicle sway warning func- ■ essary by operating the steering tion wheel in small amounts for a When the vehicle is swaying short period of time to keep the within a lane, the warning vehicle in its lane.
  • Page 262 4-5. Using the driving support systems traffic jam, this function will operate next time the hybrid system is to help follow a preceding vehicle started. by monitoring the position of the preceding vehicle. If the system detects that the steer- ing wheel has not been operated for a fixed amount of time or the steering wheel is not being firmly...
  • Page 263 4-5. Using the driving support systems departs from its lane, the white Displayed when the multi-informa- tion display is switched to the driv- line displayed on the side the ing assist system information vehicle departs from flashes display. orange. Indicates that steering wheel assis- Inside of displayed lines is ...
  • Page 264 4-5. Using the driving support systems • TRAC or VSC is not turned off. ■ Operation conditions of each • Hands off steering wheel warning function is not displayed. (P.265) ● Lane departure alert function ● Vehicle sway warning function This function operates when all of This function operates when all of the following conditions are met.
  • Page 265 4-5. Using the driving support systems center of a lane. grass, soil, or a curb • Steering assist function is not ■ Hands off steering wheel warn- operating. ■ Temporary cancelation of func- In the following situations, a warning tions message urging the driver to hold ●...
  • Page 266 ● “LTA Malfunction Visit Your Dealer” The system may not be operating properly. Have the vehicle inspected by your Toyota dealer. “LTA Unavailable” ● HIGHLANDER HV_U...
  • Page 267: Rsa (Road Sign Assist)

    4-5. Using the driving support systems RSA (Road Sign Indication on the Assist) multi-information display When the front camera recog- : If equipped nizes a sign, the sign will be dis- The RSA system recognizes played on the multi-information specific road signs using display.
  • Page 268 4-5. Using the driving support systems the displayed sign will flash under the current speed limit sign. and a buzzer will sound. Supported types of road Depending on the situation, a signs notification function may not operate properly. The following types of road signs, including electronic signs ■...
  • Page 269 The system may be malfunctioning. ● The contrast of electronic sign is Have the vehicle inspected by your low. Toyota dealer. ● All or part of the sign is hidden by ■ Customization the leaves of a tree, a pole, etc.
  • Page 270: Dynamic Radar Cruise Control With Full-Speed Range

    4-5. Using the driving support systems Dynamic radar cruise Indicators control with full-speed Operation switches ■ range In vehicle-to-vehicle dis- tance control mode, the vehicle automatically accel- erates, decelerates and stops to match the speed changes of the preceding vehicle even if the accelera- Vehicle-to-vehicle distance tor pedal is not depressed.
  • Page 271 4-5. Using the driving support systems ● Assisting the driver to measure WARNING following distance • Conditions under which the The dynamic radar cruise control vehicle-to-vehicle distance con- with full-speed range is only trol mode may not function cor- intended to help the driver in ...
  • Page 272 4-5. Using the driving support systems ● When an approach warning WARNING buzzer is heard often ■ Situations unsuitable for dynamic radar cruise control with full-speed range Do not use dynamic radar cruise control with full-speed range in any of the following situations. Doing so may result in inappropri- ate speed control and could cause an accident resulting in...
  • Page 273 4-5. Using the driving support systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar to detect the presence of vehicles up to approximately 328 ft. (100 m) ahead, determines the current vehi- cle-to-vehicle following distance, and operates to maintain a suitable following distance from the vehicle ahead.
  • Page 274 4-5. Using the driving support systems When the turn signal lever is operated and your vehicle moves to a left lane while driving at 50 mph (80 km/h) or more, the vehicle will quickly acceler- ate to help to overtake a passing vehicle. Example of acceleration When there are no longer any preceding vehicles driving slower than the set speed...
  • Page 275 4-5. Using the driving support systems when the vehicle has been continue to change while the switch is held. stopped by system control in vehicle-to-vehicle distance : When the set speed is shown in control mode) “MPH” Decreases the speed : When the set speed is shown in “km/h”...
  • Page 276 4-5. Using the driving support systems Your vehicle will also resume also be displayed. follow-up cruising if the acceler- ator pedal is depressed after the Vehicle-to-vehicle dis- vehicle ahead of you starts off. tance settings (vehi- cle-to-vehicle distance control mode) Select a distance from the table below.
  • Page 277 4-5. Using the driving support systems  When depressing the acceler- Approach warning (vehi- ator pedal cle-to-vehicle distance control mode) Selecting constant speed When your vehicle is too close control mode to a vehicle ahead, and suffi- When constant speed control cient automatic deceleration via mode is selected, your vehicle the cruise control is not possi-...
  • Page 278 Contact your Toyota dealer. decrease below the set speed in order to maintain the distance to the ■...
  • Page 279 ● When water or snow thrown up by may be a malfunction in the system. the surrounding vehicles hinders Contact your Toyota dealer. the detecting of the sensor ■ Brake operation ● When your vehicle is pointing...
  • Page 280: Bsm (Blind Spot Monitor)

    4-5. Using the driving support systems correctly detect vehicles ahead, the BSM (Blind Spot Moni- system may not operate properly. tor) ● When the road curves or when the lanes are narrow The Blind Spot Monitor is a system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right...
  • Page 281 There may be a sensor malfunction mirrors or approaching rapidly from of misaligned. Have the vehicle inspected by your Toyota dealer. behind into a blind spot, the outside rear view mirror indicator on the ■...
  • Page 282 BSM function (P.284) satisfied for approxi- mately 10 minutes. If the warning message does not disappear, have the vehicle inspected by your Toyota dealer. HIGHLANDER HV_U...
  • Page 283 ● If a sensor or the rear bumper and then press needs to be removed/installed or replaced, contact your Toyota dealer. ● Do not paint the rear bumper any color other than an official Toyota color.
  • Page 284 4-5. Using the driving support systems Vehicles that are traveling in areas that are not visible using the outside rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are not visible using the outside rear view mirrors (the blind spots) The Blind Spot Monitor detection areas ■...
  • Page 285 4-5. Using the driving support systems tional when all of the following con- detect vehicles correctly in the fol- ditions are met: lowing situations: • When the sensor is misaligned ● The Blind Spot Monitor is on. due to a strong impact to the sen- ●...
  • Page 286: Intuitive Parking Assist

    4-5. Using the driving support systems cle and/or object may increase in Intuitive parking the following situations: assist • When the sensor is misaligned due to a strong impact to the sen- sor or its surrounding area : If equipped •...
  • Page 287 Rear center sensor detection and then press  Audio system screen (vehi- When the intuitive parking assist cles with a Toyota parking function is disabled, the intuitive assist monitor) parking assist OFF indicator (P.86) illuminates. When the R shift lever is selected,...
  • Page 288 When using a high pressure sensor receives a strong washer to wash the vehicle, do impact. not spray the sensors directly, ● A non-genuine Toyota suspen- as doing so may cause a sensor sion (lowered suspension, etc.) to malfunction. is installed. ●...
  • Page 289 • It may be difficult to hear the ues to be displayed even after ini- buzzer if buzzers for other sys- tialization, have the vehicle tems are sounding. inspected by your Toyota dealer. ■ Conditions under which the ■ If “Parking Assist Unavailable function may not function cor- Clean Parking Assist Sensor”...
  • Page 290 4-5. Using the driving support systems play may be displayed abnormally, Setting the buzzer volume or objects, such as a wall, may not be detected. Adjusting the buzzer vol- ■ ● A sensor is covered in any way. ● When a sensor or the area around The buzzer volume can be a sensor is extremely hot or cold.
  • Page 291 4-5. Using the driving support systems Approximately 3.3 ft. (100 Sensor detection display, object distance Approximately 4.9 ft. (150 Detection range of the sen- ■ sors Approximately 2.0 ft. (60 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect objects that are extremely close to the vehicle.
  • Page 292 4-5. Using the driving support systems Multi-information dis- Audio system screen Head-up display play : Automatic buzzer mute function is enabled. (P.293)  Approximate distance to object: 2.0 ft. (60 cm) to 1.5 ft. (45 cm) Multi-information dis- Audio system screen Head-up display play : Automatic buzzer mute function is enabled.
  • Page 293 4-5. Using the driving support systems Multi-information dis- Head-up display Audio system screen play : Automatic buzzer mute function is disabled. (P.293) : The distance segments will blink rapidly. Buzzer operation and dis- operate.) ■ tance to an object The buzzer sounds volume can A buzzer sounds when the sen- be adjusted.
  • Page 294: Rcta (Rear Cross Traffic Alert) Function

    4-5. Using the driving support systems vehicle is detected, both outside RCTA (Rear Cross Traf- rear view mirror indicators will flash. fic Alert) function Audio system screen If a vehicle approaching from the The RCTA function uses the right or left at the rear of the vehicle BSM rear side radar sensors is detected, the RCTA icon installed behind the rear...
  • Page 295 4-5. Using the driving support systems time the power switch is turned off the water, ice, snow, mud, etc., from the attached to the rear bumper then changed to ON, the RCTA around the sensors to return the function will be enabled automati- function to normal.
  • Page 296 Vehicles are approaching When a vehicle approaching from both sides of the vehicle from the right or left at the rear of the vehicle is detected, the following will be displayed on the audio system screen.  Example (Toyota parking HIGHLANDER HV_U...
  • Page 297 4-5. Using the driving support systems cles are approaching from both sides of the vehicle  Example (Panoramic view monitor) (if equipped): Vehi- RCTA function detection areas ■ The areas that vehicles can be detected in are outlined below. The buzzer can alert the driver ●...
  • Page 298 4-5. Using the driving support systems ● Guardrails, walls, signs, parked vehicles and similar stationary objects ● Small motorcycles, bicycles, pedestrians, etc. ● Vehicles moving away from your vehicle • When backing out of a shallow angle parking spot ● Vehicles approaching from the parking spaces next to your vehi- : Depending on the conditions,...
  • Page 299: Pksb (Parking Support Brake)

    4-5. Using the driving support systems PKSB (Parking Sup- port Brake) : If equipped The Parking Support Brake system consists of the fol- lowing functions that oper- • When the distance between your ate when driving at a low vehicle and metal objects, such as a guardrail, wall, sign, or parked speed or backing up, such vehicle, which may reflect electri-...
  • Page 300 4-5. Using the driving support systems Parking Support Brake ■ NOTICE function (rear-crossing ■ If “PKSB Unavailable” is dis- vehicles) (if equipped) played on the multi-informa- tion display and the PKSB Rear radar sensors are used to OFF indicator is flashing detect approaching vehicles in If this message is displayed the detection area behind the...
  • Page 301 4-5. Using the driving support systems and turn it on. If the system is dis- stronger-than-normal brake opera- abled, it will remain off even if the tion is necessary. power switch is turned to ON after Audio system screen (Panoramic the power switch has been turned off.
  • Page 302 4-5. Using the driving support systems System overview If the Parking Support Brake determines that a collision with a detected object is possible, the hybrid system output will be restricted to restrain any increase in the vehicle speed. (Hybrid sys- tem output restriction control: See figure 2.) Additionally, if the accelerator pedal continues to be depressed, the brakes will be applied automatically to reduce the vehicle speed.
  • Page 303 4-5. Using the driving support systems Hybrid system output Braking force Time Hybrid system output restriction control begins operating System determines that possibility of collision with detected object is high Hybrid system output reduced Example: Multi-information display: “BRAKE!”  Figure 3 When brake control operates Hybrid system output Braking force Time...
  • Page 304 If this message continues to be port Brake displayed even after initialization, have the vehicle inspected by To re-enable the Parking Support your Toyota dealer. Brake when it has been disabled due to system operation perform ■ If “Parking Assist Unavailable”...
  • Page 305 4-5. Using the driving support systems ota dealer. ● A sensor may be frozen. Once the ice melts, the system will return to normal. ● Water may be continuously flow- ing over the sensor surface, such as in a heavy rain. When the sys- tem determines that it is normal, the system will return to normal.
  • Page 306: Parking Support Brake Function (Static Objects)

    4-5. Using the driving support systems Parking Support Brake function (static objects) : If equipped If the sensors detect a static object, such as a wall, in the trav- elling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving for- ward due to an accidental accelerator pedal operation, the vehicle moving the unintended direction due to the wrong shift lever position, or while parking or traveling at low...
  • Page 307 4-5. Using the driving support systems When the accelerator pedal is depressed excessively ■ When the vehicle moves in the unintended direction due to ■ the wrong shift lever position Types of sensors WARNING ■ To ensure the Parking Sup- P.286 port Brake can operate prop- erly...
  • Page 308 ● When using steam to clean the function. Have the vehicle vehicle, do not direct steam too inspected by your Toyota close to the sensors as doing so dealer. may cause a sensor to malfunc- tion.
  • Page 309 4-5. Using the driving support systems • The brake pedal is depressed ■ The Parking Support Brake after the vehicle is stopped by function (static object) will brake control. operate when • The static object is no longer 6 to 13 ft.
  • Page 310 4-5. Using the driving support systems ■ Situation in which the Parking barrier (such as those used at rail- Support Brake function (static road crossings, toll gates and objects) may not operate parking lots) • When driving on a narrow path When driving with the shift lever in surrounded by a structure, such as in a tunnel or on an iron bridge...
  • Page 311 4-5. Using the driving support systems ate properly. other devices which produce ultra- sonic waves are near the vehicle ● Weather • If a sticker or an electronic compo- • When a sensor or the area around nent, such as a backlit license a sensor is extremely hot or cold plate (especially fluorescent type), fog lights, fender pole or wireless...
  • Page 312: Parking Support Brake Function (Rear-Crossing Vehicles)

    4-5. Using the driving support systems Parking Support Brake function (rear-crossing vehicles) : If equipped If a rear radar sensor detects a vehicle approaching from the right or left at the rear of the vehicle and the system deter- mines that the possibility of a collision is high, this function will perform brake control to reduce the likelihood of an impact with the approaching vehicle.
  • Page 313 Have the vehi- • A vehicle is no longer approaching cle inspected by your Toyota from the right or left at the rear of dealer. the vehicle. ●...
  • Page 314 4-5. Using the driving support systems ■ Conditions under which the : Depending on the conditions, Parking Support Brake func- detection of a vehicle and/or tion (rear-crossing vehicles) object may occur. will not detect a vehicle ■ PKSB buzzer The Parking Support Brake function (rear-crossing vehicles) is not If the Parking Support Brake is designed to detect the following...
  • Page 315 4-5. Using the driving support systems ● When the distance between your or lowered due to the carried load vehicle and metal objects, such as ● If an electronic component, such a guardrail, wall, sign, or parked as a backlit license plate (espe- vehicle, which may reflect electri- cially fluorescent type), fog lights, cal waves toward the rear of the...
  • Page 316 4-5. Using the driving support systems Driving mode select switch The driving modes can be selected to suit the driving and usage conditions. Selecting a driving mode • When a vehicle turns into the detection area Multi-information display Driving mode select switch Operate the driving mode select switch forward or backward to select the desired driving mode on...
  • Page 317: Trail Mode

    4-5. Using the driving support systems many curves. Trail Mode (AWD vehi- When Sport mode is selected, cles) Sport mode indicator comes on. Eco drive mode Trail Mode is a system that Helps the driver accelerate in an performs integrated control eco-friendly manner and improve for the AWD, brake and fuel economy through moderate...
  • Page 318 4-5. Using the driving support systems tem may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ● When the slip indicator illuminates while Trail Mode is on ● When the Trail Mode indicator does not illuminate even though the Trail Mode switch is pressed ■...
  • Page 319: Driving Assist Systems

    4-5. Using the driving support systems VSC (Vehicle Stability Con- ■ Driving assist systems trol) Helps the driver to control skid- To keep driving safety and ding when swerving suddenly or performance, the following turning on slippery road sur- systems operate automati- faces cally in response to various driving situations.
  • Page 320 4-5. Using the driving support systems starting on an uphill speed and help reduce the pos- sibility of further damage due to EPS (Electric Power Steer- ■ a secondary collision. ing) Employs an electric motor to ■ When the reduce the amount of effort TRAC/VSC/ABS/Trailer Sway Control systems are operating needed to turn the steering...
  • Page 321 TRAC is temporary deactivated. If ■ ECB operating sound the information continues to show, contact your Toyota dealer. ECB operating sound may be heard in the following cases, but it does ■ Operating conditions of...
  • Page 322 4-5. Using the driving support systems ■ Active Cornering Assist opera- erate while turning tion sounds and vibrations ● The system detects that the vehi- When the Active Cornering Assist is cle is drifting to the outer side operated, operation sounds and ●...
  • Page 323 The ABS, TRAC, Trailer Sway Control and VSC systems will not function correctly if different tires are installed on the vehicle. Contact your Toyota dealer for fur- ther information when replacing tires or wheels. HIGHLANDER HV_U...
  • Page 324 4-5. Using the driving support systems ■ Secondary Collision Brake WARNING Do not rely solely upon the Sec- ■ Handling of tires and the sus- ondary Collision Brake. This sys- pension tem is designed to help reduce Using tires with any kind of prob- the possibility of further damage lem or modifying the suspension due to a secondary collision, how-...
  • Page 325: Driving Tips

    4-6. Driving tips hybrid battery (traction battery) Hybrid vehicle driving 4-6.Driving tips power is consumed. tips Accelerator pedal/brake For economical and ecolog- pedal operation ical driving, pay attention to the following points:  Drive your vehicle smoothly. Avoid abrupt acceleration and Using Eco drive mode deceleration.
  • Page 326 4-6. Driving tips gently release the brake pedal Checking tire inflation to allow the vehicle to move for- pressure ward slightly while avoiding overuse of the accelerator Make sure to check the tire infla- pedal. Doing so can help control tion pressure frequently.
  • Page 327: Winter Driving Tips

    Repairing or replacing snow match the size of the tires. tires Request repairs or replacement of WARNING snow tires from Toyota dealers or ■ Driving with snow tires legitimate tire retailers. This is because the removal and Observe the following precautions attachment of snow tires affects to reduce the risk of accidents.
  • Page 328 Have the vehi- cle inspected by your Toyota dealer immediately. When driving the vehicle Accelerate the vehicle slowly, Selecting tire chains...
  • Page 329 4-6. Driving tips Side chain (0.12 in. [3 mm] in NOTICE diameter) ■ Fitting tire chains Side chain (0.39 in. [10 mm] The tire pressure warning valves in width) and transmitters may not function correctly when tire chains are fit- Side chain (1.18 in.
  • Page 330: Utility Vehicle Precautions

    4-6. Driving tips Utility vehicle precau- WARNING tions ■ Utility vehicle precautions Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death, serious injury or damage to utility vehicle class, which your vehicle: has higher ground clear- ●...
  • Page 331 4-6. Driving tips Off-road driving WARNING ■ Off-road driving precautions When driving your vehicle Always observe the following pre- off-road, please observe the fol- cautions to minimize the risk of lowing precautions to ensure death, serious injury or damage to your vehicle: your driving enjoyment and to help prevent the closure of...
  • Page 332 4-6. Driving tips ● Always perform a maintenance NOTICE inspection after each day of ■ To prevent water damage off-road driving that has taken you through rough terrain, sand, Take all necessary safety mea- mud, or water. For scheduled sures to ensure that water dam- maintenance information, refer age to the hybrid battery (traction to the “Scheduled Maintenance...
  • Page 333: Interior Features

    Interior features 5-1. Toyota multi-operation touch Toyota multi-operation touch ........5-2. Using the air conditioning system and defogger Front automatic air condi- tioning system ... Rear automatic air condi- tioning system ... Heated steering wheel/seat heaters/seat ventilators ........5-3. Using the interior lights Interior lights list ..
  • Page 334: Toyota Multi-Operation Touch Toyota Multi-Operation Touch

    Operate a switch to change the dis- played function screen. Toyota multi-operation The displayed function can also be touch operation changed by performing an up or down flick operation on the Toyota Moving screens on the Toy- ■ multi-operation touch. ota multi-operation touch Selecting...
  • Page 335 5-1. Toyota multi-operation touch Select to return to the split-screen display. Toyota multi-operation touch settings AWD models: Select “Setting” on the vehicle information screen to display the setting screen. Select slide operation on/off Display the software informa- tion Copyright ©1982-2013, QNX Software Systems Limited.
  • Page 336: 5-2. Using The Air Conditioning System And Defogger

    Air outlets and fan speed are automatically adjusted accord- ing to the temperature setting. Vehicles with a 12.3-inch display: The air conditioning system can be displayed and operated on the toyota multi-operation touch. Air conditioning controls (vehicle with a 8-inch display) Automatic mode switch (P.345)
  • Page 337 5-2. Using the air conditioning system and defogger Windshield wiper de-icer switch Adjusting the temperature speed ■ setting Pressing the “OFF” switch to turns off the fan. Turn driver’s side temperature Change the airflow mode control switch clockwise to ■ increases the temperature and To change the airflow mode, turn the switch counterclockwise...
  • Page 338 5-2. Using the air conditioning system and defogger mode switch. and outside rear view mirror defog- gers switch is on, the indicator illu- Set cooling and dehumidifi- ■ minates on the rear window cation function defogger and outside rear view mir- Press the “A/C”...
  • Page 339 5-2. Using the air conditioning system and defogger ● The windows may fog up if the inside and outside the vehicle may recirculated air mode is used. enter into and accumulate in the air conditioning system. This may ■ When driving on dusty roads then cause odor to be emitted Close all windows.
  • Page 340 Flammable refrigerant system Have repair/replacement per- ■ Customization formed by your Toyota dealer. When a part of the air conditioning Some functions can be customized. system, such as the evaporator, is (P.526) to be replaced, it must be replaced with a new one.
  • Page 341 5-2. Using the air conditioning system and defogger Air conditioning controls (vehicle with a 12.3-inch dis- play) Left-hand side temperature control switch Automatic mode switch (P.345) Fan speed increase switch Windshield defogger switch Right-hand side temperature control switch Rear window defogger and outside rear view mirror defoggers switch Fan speed decrease switch “OFF”...
  • Page 342 5-2. Using the air conditioning system and defogger When the windshield defogger Caution switch is on, the indicator illumi- nates on the windshield defogger switch. Air conditioning sys- Defogging the rear window ■ and outside rear view mir- Air conditioning sys- rors tem lubricant type Defoggers are used to defog the...
  • Page 343 Have repair/replacement per- formed by your Toyota dealer. Display the rear air condition- When a part of the air conditioning ing control screen (P.350) system, such as the evaporator, is...
  • Page 344 5-2. Using the air conditioning system and defogger ■ Eco air conditioning mode Select the S-FLOW mode When Eco drive mode is selected (P.345) using the driving mode select switch, eco air conditioning mode ■ When the outside temperature turns on. exceeds 75°F (24°C) and the air When a drive mode other than Eco conditioning system is on...
  • Page 345 5-2. Using the air conditioning system and defogger • It is recommended that the air NOTICE conditioning system be set to out- side air mode prior to turning the ■ Humidity sensor vehicle off. In order to detect fog on the wind- •...
  • Page 346 5-2. Using the air conditioning system and defogger  No passengers are detected ate. in the rear seats ■ Operation of manual airflow control  The windshield defogger is Even if the function is manually not operating switched to directing airflow to only the front seats, when a rear seat is While operating, the indicator illumi- occupied, it may automatically direct...
  • Page 347 5-2. Using the air conditioning system and defogger Front side outlets  WARNING ■ To prevent burns Do not touch the glass at lower part of the windshield or to the side of the front pillars when the windshield wiper deicer is on. Air outlet layout and oper- ations Location of air outlets...
  • Page 348: Rear Automatic Air Conditioning System

    Vehicles with a 12.3-inch display: The rear air conditioning system can be operated using the toyota multi-operation touch and rear air conditioning control panel. Select “REAR” on the front air condiotioning control screen to display the rear air conditioning control screen.
  • Page 349 5-2. Using the air conditioning system and defogger perature. Front air conditioning control panel (vehicle with a 8-inch dis- ■ play) Rear air conditioning system on/off switch “REAR CLIMATE” switch The mode switches between the rear air conditioning control mode and front air conditioning control mode each time the “REAR CLIMATE”...
  • Page 350 5-2. Using the air conditioning system and defogger Rear air conditioning con- ■ trol screen (vehicle with a 12.3-inch display) Adjust the rear seats fan Upper body speed setting Upper body and feet Adjust the rear seats tem- Feet perature setting Front air conditioning con- ■...
  • Page 351 5-2. Using the air conditioning system and defogger Rear air conditioning con- ■ Air outlets trol screen (vehicle with a 12.3-inch display) Location of air outlets ■ To change the airflow mode, The air outlets and air volume select the airflow mode control changes according to the switch.
  • Page 352: Heated Steering Wheel/Seat Heaters/Seat Ventilators

    5-2. Using the air conditioning system and defogger Heated steering NOTICE wheel /seat heat- ■ To prevent 12-volt battery dis- /seat ventilators charge Do not leave the air conditioning system on longer than necessary : If equipped when the hybrid system is off. ...
  • Page 353 The indicator light comes on when the heated steering wheel is oper- ating. Vehicle with a 8-inch display  ■ Operation condition Front (Toyota multi-opera- ■ The power switch is in ON. tion touch: Vehicle with a ■ Timer function 12.3-inch display)
  • Page 354 5-2. Using the air conditioning system and defogger ● Do not use seat heater more than necessary. Seat ventilators Front air condioning con- ■ trol panel Each time the switch is pressed, the operation condition changes Rear ■ as follows. Each time the switch is pressed, Hi (3 segments lit)Mid (2 seg- the operation condition changes...
  • Page 355 5-2. Using the air conditioning system and defogger Toyota multi-operation ■ touch (Vehicle with a 12.3-inch display) Select to display the seat cli- mate screen. Each time the switch is selected, the operation condition changes as follows. Hi (3 segments lit)Mid (2 seg- ments lit)Lo (1 segment...
  • Page 356: 5-3. Using The Interior Lights

    5-3. Using the interior lights Interior lights list 5-3.Using the interior lights Location of the interior lights Front personal lights (P.357) Front interior lights (P.357) Shift lever light Open tray lights (if equipped) Door courtesy lights Ambient lights (if equipped) Rear personal lights (if equipped) (P.357) Rear personal lights (if equipped) (P.357) Rear interior light (P.357)
  • Page 357 5-3. Using the interior lights Operating the interior lights Front interior lights ■ Rear personal lights ■ Turns the lights on/off Vehicles without panoramic  moon roof Turns the lights on/off linked to door positions Turns the lights on Turns the lights off Rear interior lights ■...
  • Page 358 5-3. Using the interior lights ■ To prevent the 12-volt battery from being discharged If the interior lights remain on when the power switch is turned off, the lights will go off automatically after 20 minutes. ■ The interior lights may turn on automatically when If any of the SRS airbags deploy (inflate) or in the event of a strong...
  • Page 359: Using The Storage Features

    5-4. Using the storage features List of storage features 5-4.Using the storage features Location of the storage features Auxiliary boxes (P.362) Open tray (if equipped) (P.362) Glove box (P.360) Bottle holders (P.361) Cup holders (P.361) Console box (P.360) ● Lighters or spray cans may WARNING explode.
  • Page 360 5-4. Using the storage features WARNING ■ When storage compartments are not in use When driving or when the storage compartments are not in use, keep the lids closed. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by an open lid or the Vehicles with wireless...
  • Page 361 5-4. Using the storage features Third seats  Cup holders Front seats  WARNING ■ Items unsuitable for the cup Second seats (8-seat models)  holder Pull the armrest down. Do not place anything other than cups, aluminum cans, or water bottles in the cup holders.
  • Page 362 5-4. Using the storage features Rear doors  WARNING ■ Items unsuitable for storing ■ Bottle holders (Overhead) ● When storing a bottle, close the Do not store items heavier than cap. 0.44 lb. (200 g). ● The bottle may not be stored Doing so may cause the auxiliary depending on its size or shape.
  • Page 363 5-4. Using the storage features Front of console  WARNING ■ Items unsuitable for the open tray Observe the following precautions when putting items in the open tray. Failure to do so may cause items to be thrown out of the tray in the event of sudden braking or steering.
  • Page 364: Luggage Compartment Features

    5-4. Using the storage features Luggage compart- WARNING ment features ■ When the cargo net is not in To avoid injury, always return the Cargo hooks hooks to their stowed positions when not in use. Pull down the hook to use. The cargo hooks are provided for Grocery bag hooks securing loose items.
  • Page 365 5-4. Using the storage features Remove the center deck Press the lock release but- board (P.477) and take out tons to extend the ends of the the luggage cover unit. luggage cover unit. Removing the luggage To install the luggage cover ■...
  • Page 366 5-4. Using the storage features Removing the luggage cle. ■ cover Release the cover from the left and right anchors and allow it to retract. Stowing the luggage cover ■ Compress the end of the lug- (vehicles with side deck gage cover and lift the lug- board) gage cover up.
  • Page 367 5-4. Using the storage features Auxiliary boxes WARNING ■ Luggage cover Center deck under tray  When installing/stowing the lug- ● Pull the strap upwards to open gage cover, make sure that the luggage cover is securely the center deck board. installed/stowed.
  • Page 368: 5-5. Using The Other Interior Features

    5-5. Using the other interior features Other interior features 5-5.Using the other interior features USB charging ports The USB charging ports are used to supply 2.1 A of electric- ity at 5 V to external devices. The USB charging ports are for charging only.
  • Page 369 5-5. Using the other interior features ual of the portable device. NOTICE The “Qi” symbol ■ ● Do not apply excessive force to or impact the USB charging The “Qi” symbol is a trademark ports. of the Wireless Power Consor- ●...
  • Page 370 5-5. Using the other interior features area, charging will stop tem- charger will be memorized. porarily then restart. Operation indicator light ■ status Operation indi- State cator light The Wireless char- ger is off Standby (charging Place a portable device on is possible) the charging area with its Green (illumi-...
  • Page 371 5-5. Using the other interior features charger. However, compatibility Suspected Measure with all devices which meet the Qi causes wireless charging standard is not guaranteed. Vehicle to ● The wireless charger is designed charger com- Contact your Toy- to supply low power electricity (5 munication ota dealer.
  • Page 372 5-5. Using the other interior features again. is being identified, operation sounds may be heard. This is not a malfunc- ■ Sound generated during opera- tion. tion ■ Cleaning the wireless charger When the power supply switch is turned on or while a portable device P.397 ■...
  • Page 373 5-5. Using the other interior features HIGHLANDER HV_U...
  • Page 374 5-5. Using the other interior features WARNING ■ Caution while driving When charging a portable device while driving, for safety reasons, the driver should not operate the portable device. HIGHLANDER HV_U...
  • Page 375 5-5. Using the other interior features WARNING NOTICE ■ Caution regarding interfer- ■ Conditions in which the wire- ence with electronic devices less charger may not operate correctly People with implantable cardiac pacemakers, cardiac resynchroni- In the following situations, the zation therapy pacemakers or wireless charger may not operate implantable cardioverter defibrilla-...
  • Page 376 If in situations other than above the wireless charger does not operate properly or the operation indicator light is blinking, the wire- less charger may be malfunction- ing. Contact your Toyota dealer. ■ To prevent failure or damage to data ●...
  • Page 377 5-5. Using the other interior features On the instrument panel  NOTICE Open the lid. ■ To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip. Coat hooks The coat hooks are provided with the rear assist grips.
  • Page 378 5-5. Using the other interior features When turning the power ■ NOTICE outlets on ■ To prevent 12-volt battery dis- Check that the parking brake charge is engaged, securely depress Do not use the power outlet lon- ger than necessary when the the brake pedal and press hybrid system is not running.
  • Page 379 If it is necessary to check the turn the power outlets off. voltage, have the vehicle inspected by your Toyota dealer. Disconnect each plug from ● While a power outlet is being the power outlets.
  • Page 380 Also, if a ate procedures above, have the liquid or snow is on the power vehicle inspected by your Toyota outlet, dry the outlet before dealer. using it. ●...
  • Page 381 Do not use the power outlets if replace the power outlet. For the vehicle has a vehicle cover information on replacement, installed. contact your Toyota dealer. ● Do not sleep in the vehicle while ■ Using the power outlets while...
  • Page 382 5-5. Using the other interior features Sun visors NOTICE ● Do not use devices which are sensitive to vibration or heat in the vehicle. These devices may malfunction due to vibration while driving or heat while the vehicle is parked in the sun.
  • Page 383 5-5. Using the other interior features NOTICE ■ To prevent the 12-volt battery from being discharged Do not leave the vanity lights on for extended periods while the hybrid system is off. Conversation mirror Hook the sunshade on to the Push the lid.
  • Page 384: Garage Door Opener

    5-5. Using the other interior features operating. Garage door opener Buttons : If equipped Vehicles with Digital Rearview  The garage door opener can Mirror be programmed using the ® HomeLink to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices.
  • Page 385 Certification for the garage door opener ■ When support is necessary ■ Conforming to federal safety Visit on the web at standards www.homelink.com/toyota or call ® Do not use the HomeLink com- 1-800-355-3515. patible transceiver with any garage door opener or device that...
  • Page 386 5-5. Using the other interior features ® HomeLink indicator light Programming the Home- flashes (orange). ® Link Point the remote control Before programming Home- ■ transmitter for the device at ® Link the rear view mirror, 1 to 3 in. (25 to 75 mm) from the ...
  • Page 387 5-5. Using the other interior features Vehicles with auto anti-glare second intervals, repeatedly,  inside rear view mirror ® until the HomeLink indicator light changes from slowly flash- ing (orange) to rapidly flashing (green) (rolling code) or continu- ously lit (green) (fixed code). ®...
  • Page 388 5-5. Using the other interior features code programming. motor operates when the ® Locate the “Learn” or “Smart” HomeLink button is button on the garage door pressed, the garage door opener motor in the garage. opener motor recognizes the ® HomeLink signal.
  • Page 389 5-5. Using the other interior features ble device. (To check device ing that 2-way communica- compatibility, refer to tion is enabled. www.homelink.com.) Reprogramming a single ■ Within 5 seconds after pro- ® HomeLink button gramming the garage door When the following procedure is opener has been completed, performed, buttons which if the garage door opener...
  • Page 390 5-5. Using the other interior features Vehicles with auto anti-glare  Color Status inside rear view mirror Opening/closing Green has completed Feedback sig- Red (flashing) nals cannot be received The indicators can operate within approximately 820 ft. (250 m) of the garage door. However, if there are obstructions Opening between the garage door and...
  • Page 391 5-5. Using the other interior features If you sell your vehicle, be sure to erase the programs stored in the ® HomeLink memory. Vehicles with auto anti-glare  inside rear view mirror Vehicles with Digital Rearview  Mirror HIGHLANDER HV_U...
  • Page 392 5-5. Using the other interior features HIGHLANDER HV_U...
  • Page 393 Maintenance and care Light bulbs ....6-1. Maintenance and care Cleaning and protecting the vehicle exterior ..Cleaning and protecting the vehicle interior ... 6-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......6-3. Do-it-yourself mainte- nance Do-it-yourself service pre- cautions.....
  • Page 394: 6-1. Maintenance And Care

    6-1. Maintenance and care ● Rear spoiler may not be washable Cleaning and protect- 6-1.Maintenance and care in some automatic car washes. ing the vehicle exte- There may also be an increased rior risk of damage to vehicle. ■ High pressure car washes As water may enter the cabin, do Perform cleaning in a man- not bring the nozzle tip near the...
  • Page 395 If the paint of the rear bumper is so may cause the electrical com- chipped or scratched, the system ponents, etc. to catch fire. may malfunction.If this occurs, consult your Toyota dealer. ■ When cleaning the windshield (vehicles with rain-sensing windshield wipers) NOTICE Set the wiper switch to off.
  • Page 396 6-1. Maintenance and care • Brake parts NOTICE ● To prevent the wheels from cor- ● Keep the cleaning nozzle at roding, remove any dirt and least 11.9 in. (30 cm) away from store in a place with low humid- the vehicle body.
  • Page 397: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protect- WARNING ing the vehicle interior ■ Water in the vehicle Do not splash or spill liquid in ● the vehicle, such as on the floor, Perform cleaning in a man- in the hybrid battery (traction ner appropriate to each battery) air vents, and in the lug- component and its material.
  • Page 398 Do not allow glass cleaner to con- ■ Caring for leather areas tact the lens. Also, do not touch  the lens. ( P.243) Toyota recommends cleaning the interior of the vehicle at least twice a year tomaintain the quality of the vehicle’s interior. HIGHLANDER HV_U...
  • Page 399 6-1. Maintenance and care Cleaning the synthetic leather areas  Remove dirt and dust using a vacuum cleaner.  Wipe it off with a soft cloth dampened with neutral deter- gent diluted to approximately  Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water.
  • Page 400: 6-2. Maintenance

    ■ Repair and replacement other reproductive harm. Avoid It is recommended that genuine exposure and wash any Toyota parts be used for repairs to affected area immediately. ensure performance of each sys- ● 12-volt battery posts, terminals tem. If non-Toyota parts are used in...
  • Page 401 4.2-inch display  Press of the meter The use of Toyota Repair Manuals is recommended. control switch to select For details about warranty cover- Press of the meter age, refer to the separate “Owner’s control switch, select Warranty Information Booklet”...
  • Page 402: General Maintenance

    Is there sufficient is recommended that any Washer fluid washer fluid? (P.415) problem you notice should be brought to the attention of your Toyota dealer or Luggage compartment qualified service shop for advice. Items Check points Check the connec- 12-volt battery WARNING tions.
  • Page 403 6-2. Maintenance Items Check points Items Check points • Does the brake • Do all the lights pedal move come on? smoothly? Lights • Are the head- • Does the brake lights aimed cor- pedal have rectly? (P.442) appropriate • Does the park- clearance from Brake pedal ing brake switch...
  • Page 404: Emission Inspection And Mainte- Nance (I/M) Programs

    I/M test and may need Tires • Have the tires to be repaired. Contact your been rotated according to the Toyota dealer to service the maintenance vehicle. schedule? • The wheel nuts Your vehicle may not pass should not be the I/M test in the follow- loose.
  • Page 405 The error code in the OBD sys- tem will not be cleared unless the vehicle is driven 40 or more times. If your vehicle does not pass the I/M test Contact your Toyota dealer to prepare the vehicle for re-test- ing. HIGHLANDER HV_U...
  • Page 406: 6-3. Do-It-Yourself Maintenance

    6-3. Do-it-yourself maintenance Do-it-yourself service 6-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Cool- ant” or a similar If you perform maintenance high quality eth- by yourself, be sure to fol- ylene gly- low the correct procedure col-based as given in these sections.
  • Page 407 6-3. Do-it-yourself maintenance Items Parts and tools ■ When working on the engine compartment Hybrid battery • Vacuum cleaner, ● Make sure that the “ACCES- (traction bat- etc. SORY” or “IGNITION ON” on tery) air intake • Phillips screw- the multi-information display vent (P.435) driver and the “READY”...
  • Page 408: Hood

    6-3. Do-it-yourself maintenance Hood WARNING ■ Pre-driving check Opening the hood Check that the hood is fully closed and locked. If the hood is not locked properly, Pull the hood lock release it may open while the vehicle is in lever.
  • Page 409: Positioning A Floor Jack

    6-3. Do-it-yourself maintenance Rear ■ Positioning a floor jack When using a floor jack, fol- low the instructions in the manual provided with the jack and perform the opera- tion safely. When raising your vehicle with a floor jack, position the jack correctly.
  • Page 410: Engine Compartment

    6-3. Do-it-yourself maintenance Engine compartment Components Engine coolant reservoir (P.413) Fuse boxes (P.439) Engine oil filler cap (P.411) Engine oil level dipstick (P.411) Brake fluid reservoir (P.414) Washer fluid tank (P.415) Electric cooling fan Condenser (P.414) Radiator (P.414) Power control unit coolant reservoir (P.414) Checking and adding the ■...
  • Page 411 6-3. Do-it-yourself maintenance stick. depending on the type of vehicle or engine. Checking the engine oil ■ Wipe the dipstick and reinsert Park the vehicle on level it fully. ground. After warming up the Checking the oil type and ■ engine and turning off the preparing the item needed hybrid system, wait more...
  • Page 412 Press of the meter oil and filters in household trash, control switch to select in sewers or onto the ground. Call your Toyota dealer, service Press of the meter station or auto parts store for control switch, select information concerning recy- cling or disposal.
  • Page 413 “LOW” lines on the reservoir line. (P.497) when the engine is cold. ■ Coolant selection Only use “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology.
  • Page 414 If you cannot find a leak, have your Do not touch the radiator or con- Toyota dealer test the cap and denser as they may be hot and check for leaks in the cooling sys- cause serious injuries, such as tem.
  • Page 415 6-3. Do-it-yourself maintenance opened brake fluid. WARNING ■ When adding washer fluid WARNING Do not add washer fluid when the ■ When filling the reservoir hybrid system is hot or operating Take care as brake fluid can harm as washer fluid contains alcohol your hands and eyes and damage and may catch fire if spilled on the painted surfaces.
  • Page 416: 12-Volt Battery

    6-3. Do-it-yourself maintenance 12-volt battery Location The 12-volt battery is located in the right-hand side of luggage compartment. Exterior Make sure that the 12-volt bat- tery terminals are not corroded and that there are no loose con- nections, cracks, or loose clamps.
  • Page 417 If the system will not start even after ing electrolyte multiple attempts at all the methods ● If electrolyte gets in your eyes above, contact your Toyota dealer. Flush your eyes with clean water for at least 15 minutes and get immediate medical WARNING attention.
  • Page 418: Tires

    (hydrogen) to enter the Check the spare tire condition passenger compartment, causing a fire or explosion. and pressure if not rotated. For replacement of the 12-volt battery, contact your Toyota dealer. ■ When handling the 12-volt battery ...
  • Page 419 Have the vehicle inspected at your indicating internal damage. Toyota dealer. ● A tire goes flat repeatedly or can- ■ Maximum load of tire...
  • Page 420 ● Do not use tire sizes other than tion and handling performance com- those recommended by Toyota. pared with summer tires in highway ● Do not mix differently con- driving.
  • Page 421 7-inch display  Front To equalize tire wear and extend tire life, Toyota recommends that tire rotation is carried out at the same interval as tire inspection. Do not fail to initialize the tire pres- sure warning system after tire rota- tion.
  • Page 422 The warning of the tire pressure • If non-genuine Toyota wheels are warning system will change in used. accordance with the conditions • A tire has been replaced with a under which it was initialized.
  • Page 423 6-3. Do-it-yourself maintenance ■ Tire pressure warning system certification When replacing tires or wheels, Installing tire pressure tire pressure warning valves and warning valves and trans- transmitters must also be mitters installed. HIGHLANDER HV_U...
  • Page 424 If a liquid seal- ant is used, contact your Toyota be initialized. Have tire pressure dealer or other qualified service warning valves and transmitter shop as soon as possible.
  • Page 425 6-3. Do-it-yourself maintenance How to initialize the tire Adjust the tire inflation pres- ■ pressure warning system sure to the specified cold tire inflation pressure level. 4.2-inch display  (P.511) Park the vehicle in a safe Make sure to adjust the tire pres- place and turn the power sure to the specified cold tire infla- switch off.
  • Page 426 6-3. Do-it-yourself maintenance Drive the vehicle at approxi- when the tires are cold, and con- duct initialization again. mately 25 mph (40 km/h) or ● While the position of each tire is more for approximately 10 to 30 being determined and the inflation minutes until the inflation pres- pressures are not being displayed sure of each tire is displayed on...
  • Page 427 Turn the power switch to ON. driving. If the inflation pressure of each tire Press of the meter is still not displayed, have the vehi- cle inspected by your Toyota dealer. control switch to select WARNING Press of the meter ■...
  • Page 428 6-3. Do-it-yourself maintenance sure warning light starts Even if the vehicle is not driven at approximately 25 mph (40 km/h) or slowly blinking 3 times. more, registration can be com- pleted by driving for a long time. The change wheel set mode is acti- However, if registration does not vated and registration is started.
  • Page 429 If the ID codes cannot be registered power switch off before driving. even when performing the above ■ If ID codes are not registered procedure, contact your Toyota properly dealer. In the following situations, ID code registration may take longer than usual to be completed or may not be possible.
  • Page 430: Tire Inflation Pressure

    Reduced tire life due to wear ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, Tire valve have it checked by your Toyota dealer. Tire pressure gauge ■ Instructions for checking tire Remove the tire valve cap. inflation pressure...
  • Page 431 6-3. Do-it-yourself maintenance sure, observe the following: NOTICE ● Check only when the tires are ■ When inspecting and adjust- cold. ing tire inflation pressure If your vehicle has been parked for at least 3 hours or has not been Be sure to put the tire valve caps driven for more than 1 mile or 1.5 back on.
  • Page 432: Wheels

    Replacement wheels are avail- damage. In addition, the oil or able at your Toyota dealer. grease can cause the wheel nuts to loosen and the wheel may fall : Conventionally referred to as off- off, causing an accident and set.
  • Page 433: Air Conditioning Filter

    Removing the air condi- Aluminum wheel precau- tioning filter tions Turn the power switch off.  Use only Toyota wheel nuts Open the glove box. Slide off and wrenches designed for the damper. use with your aluminum wheels.  When rotating, repairing or...
  • Page 434 6-3. Do-it-yourself maintenance replacement may be required. (For claws ( ), and remove the scheduled maintenance information, filter cover. please refer to the “Owner’s Manual Supplement” or “Scheduled Mainte- nance Guide”.) ■ If air flow from the vents decreases dramatically The filter may be clogged.
  • Page 435: Cleaning The Hybrid Battery (Trac- Tion Battery) Air Intake Vents And Filter

    6-3. Do-it-yourself maintenance Cleaning the hybrid If dust and clogs cannot battery (traction bat- be completely removed tery) air intake vents If dust and clogs cannot be com- and filter pletely removed with the air intake vent cover installed, To prevent the fuel economy remove the cover and clean the from being affected, visually filter.
  • Page 436 If you have any Install the air intake vent concerns about cleaning the filter, cover. contact your Toyota dealer. Insert the tab of the cover as shown ■ If “Maintenance Required for in the illustration and push the Traction Battery Cooling Parts See Owner’s Manual”...
  • Page 437 If the warning mes- removed. sage does not disappear, have the vehicle inspected by your Toyota ● Carefully handle the removed dealer. filter so that it will not be dam- aged.
  • Page 438: Electronic Key Battery

     Lithium battery CR2032 ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or Remove the depleted battery. equivalent type recommended by the manufacturer.
  • Page 439: Checking And Replacing Fuses

    6-3. Do-it-yourself maintenance minal facing up. Checking and replac- ing fuses If any of the electrical com- ponents do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Checking and replacing WARNING fuses ■...
  • Page 440 6-3. Do-it-yourself maintenance Under the driver’s side instru- Check if the fuse is blown.  ment panel Replace the blown fuse with a new fuse of an appropriate amperage Remove the lid. rating. The amperage rating can be Make sure to push the claw when found on the fuse box lid.
  • Page 441 If there is an overload in a cir- Have the cause of electrical over- cuit load determined and repaired by The fuses are designed to blow, pro- your Toyota dealer as soon as tecting the wiring harness from possible. damage. ■...
  • Page 442: Headlight Aim

    If the headlight cannot be adjusted  Make sure the vehicle has a using this procedure, take the vehi- full tank of gasoline and the cle to your Toyota dealer to adjust the headlight aim. area around the headlight is not deformed.
  • Page 443: Light Bulbs

    Toyota dealer. For more information about Front turn signal lights replacing other light bulbs, Front side marker lights contact your Toyota dealer. Rear  Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P.512)
  • Page 444 LED lights The lights other than the following lights each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ● Front turn signal lights/parking lights (type A) ●...
  • Page 445 6-3. Do-it-yourself maintenance light unit. base and light unit. Front side marker lights Rear turn signal lights ■ ■ Turn the bulb base counter- Open the back door and clockwise and remove it. using a flathead screwdriver, remove the cover. To prevent damage to the vehicle, wrap the tip of the flathead screw- driver with tape, etc.
  • Page 446 6-3. Do-it-yourself maintenance Disconnect the wire harness. unit. Turn the bulb base counter- clockwise and remove it. Install the light unit. Align the 2 guides and push the light unit toward the front of the vehicle to install it. Remove the light bulb. Install the 2 screws.
  • Page 447 6-3. Do-it-yourself maintenance Install the cover. Remove the light bulb. Back-up lights Install a new light bulb, and ■ then install the bulb base to Open the back door and the light unit by inserting it remove the cover. and turning it clockwise. Using a flathead screwdriver, remove the cover.
  • Page 448 6-3. Do-it-yourself maintenance License plate lights Insert a small flathead screw- ■ driver, etc. into either the Remove the cover. right or left hole of the lens. Using a flathead screwdriver, Push the screwdriver side- remove the cover. ways in the direction of the To prevent damage to the vehicle, wrap the tip of the flathead screw- arrow shown in the illustra-...
  • Page 449 6-3. Do-it-yourself maintenance Install the lens. WARNING ■ To prevent injury Before performing any light bulb replacement procedure, be sure to turn the power switch off. Fail- ure to do so may result in burns from hot components or a part of your body may get caught on an operating component, possibly causing serious injury.
  • Page 450 6-3. Do-it-yourself maintenance HIGHLANDER HV_U...
  • Page 451: When Trouble Arises

    When trouble arises 7-1. Essential information Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is trapped in rising water....7-2. Steps to take in an emer- gency If your vehicle needs to be towed......
  • Page 452: If Your Vehicle Has To Be Stopped In An Emergency

    7-1. Essential information Emergency flashers If your vehicle has to 7-1.Essential information be stopped in an emer- gency The emergency flashers are used to warn other drivers when the vehicle has to be Only in an emergency, such stopped on the road due to as if it becomes impossible a breakdown, etc.
  • Page 453: If The Vehicle Is Trapped In Rising Water

    7-1. Essential information briefly 3 times or more in suc- If the vehicle is cession. trapped in rising water In the event the vehicle is submerged in water, remain calm and perform the fol- lowing.  Remove the seat belt first. ...
  • Page 454 However, an emergency hammer can not shatter the windshield as it is laminated glass. : Contact your Toyota dealer or aftermarket accessory manu- facturer for further information about an emergency hammer. ■ Escaping the vehicle from the...
  • Page 455: 7-2. Steps To Take In An Emergency

    7-2. Steps to take in an emergency If your vehicle needs 7-2.Steps to take in an emergency ■ When towing the vehicle to be towed 2WD models  Be sure to transport the vehicle with the front wheels raised or If towing is necessary, we with all four wheels raised off the recommend having your...
  • Page 456 Do not tow the vehicle from the problem with your transmission. rear when the power switch is off. The steering lock mecha- Contact your Toyota dealer or nism is not strong enough to commercial towing service hold the front wheels straight.
  • Page 457 7-2. Steps to take in an emergency Towing with a wheel-lift NOTICE type truck ■ Towing with a sling-type truck Do not tow with a sling-type truck From the front (2WD models)  to prevent body damage. 2WD models  AWD models ...
  • Page 458: If You Think Something Is Wrong

    If you think something is wrong If you notice any of the fol- lowing symptoms, your vehicle probably needs adjustment or repair. Con- tact your Toyota dealer as soon as possible. NOTICE ■ Using a flatbed truck Visible symptoms Do not overly tighten the tie downs or the vehicle may be ...
  • Page 459 7-2. Steps to take in an emergency side when braking  Vehicle pulls heavily to one side when driving on a level road  Loss of brake effectiveness, spongy feeling, pedal almost touches the floor HIGHLANDER HV_U...
  • Page 460: If A Warning Light Turns On Or A Warning Buzzer Sounds

     The brake fluid level is low; or  The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. (red) (Canada) Brake system warning light ■...
  • Page 461 Details/Actions Indicates a malfunction in the vehicle’s charging system  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. : This light illuminates on the multi-information display. Low engine oil pressure warning light (warning buzzer) ■...
  • Page 462 Details/Actions Indicates a malfunction in:  The SRS airbag system;  The front passenger occupant classification system; or  The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately. ABS warning light ■ Warning light...
  • Page 463 Electric power steering system warning light (warning ■ buzzer) Warning light Details/Actions Indicates a malfunction in the EPS (Electric Power Steer- ing) system  Have the vehicle inspected by your Toyota dealer (red/yellow) immediately. Low fuel level warning light ■ Warning light Details/Actions Indicates that remaining fuel is approximately 2.6 gal.
  • Page 464 When the light comes on after blinking for approximately 1 minute: Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as  Natural causes ...
  • Page 465 ■ Warning light Details/Actions Indicates a malfunction in the intuitive parking assist func- tion  Have the vehicle inspected by your Toyota dealer immediately. Indicates that the system is temporarily unavailable, possi- (flashes) (if equipped) bly due to a sensor being dirty or covered with ice, etc.
  • Page 466 Details/Actions When a buzzer sounds simultaneously: Indicates a malfunction has occurred in the PCS (Pre-Colli- sion System).  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer does not sound: The PCS (Pre-Collision System) has become temporarily unavailable, corrective action may be necessary.
  • Page 467 (5 km/h) or more. Brake hold operated indicator ■ Warning light Details/Actions Indicates a malfunction in the brake hold system  Have the vehicle inspected by your Toyota dealer immediately. (flashes) (rear), driver’s seat position sensor, ■ Warning buzzer driver’s seat belt buckle switch, front...
  • Page 468 1 minute then stays on There may be a malfunction in the WARNING tire pressure warning system. Have the vehicle inspected by your Toyota ■ If both the ABS and the brake dealer immediately. system warning lights remain If the tire pressure warning light ...
  • Page 469 Toyota dealer. Please note that the TPMS (tire pressure warning system) is not a ●...
  • Page 470: If A Warning Message Is Displayed

    (P.460) If a warning message is dis- played again after the appropriate actions have been performed, contact your Toyota dealer. HIGHLANDER HV_U...
  • Page 471 Messages and warnings The warning lights and warning buzzers operate as follows depend- ing on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. Warning...
  • Page 472 Restart” is displayed The following systems may be mal- functioning. Have the vehicle This message is displayed when the inspected by your Toyota dealer hybrid battery (traction battery) immediately. charge has become extremely low because the shift lever has been left ●...
  • Page 473 Toyota sage is cleared. dealer is displayed If the message is not cleared, have The system or part shown on the the vehicle inspected by your Toyota multi-information display is malfunc- dealer. tioning. Have the vehicle inspected ■...
  • Page 474: If You Have A Flat Tire

    Have the vehicle spare tire. inspected by your Toyota dealer For details about tires: immediately. • “Hybrid System Malfunction” P.418 • “Check Engine”...
  • Page 475 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Jack handle Wheel nut wrench Adapter socket Jack Spare tire Wheel lock key (if equipped) ● Only use the tire jack that WARNING comes with this vehicle for ■...
  • Page 476 7-2. Steps to take in an emergency partment. Always return the WARNING wheel lock key to its original ● Put the jack properly in its jack position after use, so that it does point. not get lost. (P.475) Removal ■ For ease of removal, the wheel lock nut should always be the first one loosened.
  • Page 477 Do not use an impact wrench. Using an impact wrench may cause permanent damage to wheel lock nut and wheel lock key. If in doubt about wheel lock application, contact your Toyota dealer. Remove the jack after remov- Taking out the jack ing the hook.
  • Page 478 7-2. Steps to take in an emergency Remove the center deck in place by the button. board. Connect the jack handle to the adapter socket. Turn the Remove the cover. jack handle counterclock- If it is difficult to remove the cover, wise.
  • Page 479 7-2. Steps to take in an emergency Fully depress the secondary Replacing a flat tire latch and remove the Chock the tires. holding bracket from the hoist assembly Wheel chock Flat tire positions Behind the rear Front left-hand right-hand side side tire Tilt the bracket...
  • Page 480 7-2. Steps to take in an emergency scratching the wheel surface. Turn the tire jack portion by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indi- cate the jack point positions.
  • Page 481 • If there are any cracks or defor- mations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. HIGHLANDER HV_U...
  • Page 482 7-2. Steps to take in an emergency order shown in the illustra- motion, causing the tire to come off. tion. Vehicles with wheel locks: Tighten the wheel lock using the wheel lock key after tightening the other wheel nuts. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) Install the spare tire and loosely tighten each wheel...
  • Page 483 7-2. Steps to take in an emergency Lay the tire on the ground holding bracket through with the outer surface (valve the wheel opening. stem) facing up. Before raising the tire, make sure that the hoist assembly is perpendicular to the wheel opening.
  • Page 484 7-2. Steps to take in an emergency Confirm it is not loose after spare tire installed, the vehicle height will be different than when tightening: driving with standard tires. ■ If you have a flat front tire on a road covered with snow or ice Install the compact spare tire on one of the rear wheels of the vehicle.
  • Page 485 • PKSB (Parking Support Brake) The vehicle becomes lower when (if equipped) driving with the compact spare tire compared to when driving with • Toyota parking assist monitor (if standard tires. Be careful when equipped) driving over uneven road sur- faces.
  • Page 486 However, ered, contact your Toyota depending on the type of mal- dealer. function, an interim measure is available to start the hybrid system.
  • Page 487  One or both of the 12-volt bat- tery terminals may be discon- nected. (P.416)  The 12-volt battery may be discharged. (P.491) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Starting the hybrid sys- tem in an emergency...
  • Page 488: If You Lose Your Keys

    If the fuel filler door cannot be opened New genuine mechanical keys can be made by your If the fuel filler door opener Toyota dealer using another switch cannot be operated, mechanical key and the key contact your Toyota dealer number stamped on your to service the vehicle.
  • Page 489: If The Electronic Key Does Not Operate Properly

    7-2. Steps to take in an emergency spilling out, turn the cap If the electronic key slowly when removing it. does not operate prop- During refueling, fuel may spill erly out from the filler opening due to air being discharged from If communication between inside the fuel tank.
  • Page 490 ■ Key linked functions Ensure that the shift lever is in P and depress the brake pedal. Touch the Toyota emblem side of the electronic key to Closes the windows and the the power switch. moon roof (turn and hold)
  • Page 491: If The 12-Volt Battery Is Discharged

    In the event that the hybrid sys- hybrid system if the vehi- tem still cannot be started, con- cle’s 12-volt battery is dis- tact your Toyota dealer. charged. You can also call your Toy- ■ Stopping the hybrid system...
  • Page 492 7-2. Steps to take in an emergency Open the hood (P.408) and Restarting the hybrid sys- fuse box cover. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below.
  • Page 493 Once the hybrid system starts, the hybrid system of your have the vehicle inspected at vehicle by turning the power your Toyota dealer as soon as switch to ON. possible. Make sure the “READY” indi- cator comes on. If the indica-...
  • Page 494 When the 12-volt battery necting the 12-volt battery. is depleted, have the vehicle ● The power back door must be ini- inspected at your Toyota dealer. tialized. (P.141) ● Some systems may require initial- ■ When replacing the 12-volt bat- ization.
  • Page 495 ● Do not smoke, use matches, cigarette lighters or allow open Hole section of the vehicle flame near the 12-volt battery. For details, consult your Toyota dealer. ■ 12-volt battery precautions The 12-volt battery contains poi- sonous and corrosive acidic elec-...
  • Page 496 12-volt battery. ■ After recharging the 12-volt battery Have the 12-volt battery inspected at your Toyota dealer as soon as possible. If the 12-volt battery is deteriorat- ing, continued use may cause the 12-volt battery to emit a malodor- ous gas, which may be detrimen- tal to the health of passengers.
  • Page 497: If Your Vehicle Overheats

     The needle of the engine leaks. coolant temperature gauge If a large amount of coolant leaks, (P.89) enters the red zone immediately contact your Toyota or a loss of hybrid system dealer. power is experienced. (For example, the vehicle speed does not increase.)
  • Page 498 If a large amount of coolant leaks, immediately contact your Toyota from the radiator or hoses. dealer. The fan operates when the air con- ditioning system is turned on imme- diately after a cold start.
  • Page 499 If the message does not disappear: sufficiently. Adding cool coolant to Stop the hybrid system and contact a hot hybrid system too quickly your Toyota dealer. can cause damage to the hybrid If the message is not displayed: system. The hybrid system temperature has dropped and the vehicle may be driven normally.
  • Page 500 7-2. Steps to take in an emergency If the vehicle becomes NOTICE stuck ■ To prevent damage to the cooling system Observe the following precau- Carry out the following pro- tions: cedures if the tires spin or ● Avoid contaminating the coolant the vehicle becomes stuck with foreign matter (such as in mud, dirt or snow:...
  • Page 501 7-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people.
  • Page 502 7-2. Steps to take in an emergency HIGHLANDER HV_U...
  • Page 503: Vehicle Specifications

    Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 8-2. Customization Customizable features ........8-3. Initialization Items to initialize ..HIGHLANDER HV_U...
  • Page 504 8-1. Specifications Maintenance data (fuel, oil level, etc.) 8-1.Specifications Dimensions and weight Overall length 194.9 in. (4950 mm) Overall width 76 in. (1930 mm) 68.1 in. (1730 mm) Overall height Wheelbase 112.2 in. (2850 mm) Front 65.3 in. (1659 mm) Tread Rear 65.4 in.
  • Page 505 8-1. Specifications your Toyota. It is used in regis- Turn back the carpet. tering the ownership of your vehicle. Top left of the instrument  panel The vehicle identification number is stamped. Remove the dash panel insu- lator pad. Under the right-hand front ...
  • Page 506 8-1. Specifications ness. and install the trim with the nut. 10Install the scuff plate. Install the dash panel insula- tor pad. Insert the 2 guides at the front of the scuff plate into the trim, align the 7 claws with the wire harness clamps, and install the scuff plate.
  • Page 507 8-1. Specifications Engine Model A25A-FXS Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.44  4.07 in. (87.5  103.4 mm) Displacement 151.8 cu. in. (2487 cm Valve clearance (engine cold) Automatic adjustment Fuel Fuel type Unleaded gasoline only 87 (Research Octane Number 91) or Octane Rating higher...
  • Page 508 ■ SAE 0W-16 is the best choice “Toyota Genuine Motor Oil” is for good fuel economy and good used in your Toyota vehicle. Use starting in cold weather. Toyota approved “Toyota Genu- If SAE 0W-16 is not available, ine Motor Oil” or equivalent to SAE 0W-20 oil may be used.
  • Page 509 Capacity Power con- 2.0 qt. (1.9 L, 1.7 Imp. qt.) trol unit Use either of the following:  “Toyota Super Long Life Coolant”  Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and Coolant type non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
  • Page 510 Fluid capacity Fluid type Toyota Genuine ATF WS : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE ■ Hybrid transmission fluid type Using transmission fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the transmission of your vehicle.
  • Page 511 8-1. Specifications Brakes 3.6 in. (91 mm) Min. Pedal clearance Pedal free play 0.04  0.24 in. (1  6 mm) Brake pad wear limit 0.04 in. (1 mm) Fluid type SAE J1703 or FMVSS No. 116 DOT 3 : Minimum pedal clearance when depressed with a force of 67.4 lbf (300 N, 30.6 kgf) while the engine is running.
  • Page 512 8-1. Specifications Type B  Tire size 235/55R20 102V, T165/90D18 107M (spare) Front  36 psi (250 kPa, 2.5 kgf/cm or bar) Rear  36 psi (250 kPa, 2.5 kgf/cm or bar) Spare  Tire inflation pressure 60 psi (420 kPa, 4.2 kgf/cm or bar) (Recommended cold tire Driving at high speeds (above 100 mph [160...
  • Page 513 8-1. Specifications C: Single end bulbs (clear) HIGHLANDER HV_U...
  • Page 514: Fuel Information

    Toyota strongly recommends the nese Tricarbonyl). use of Top Tier Detergent Gaso- line. For more information on Top Toyota does not recommend the use Tier Detergent Gasoline and a list of gasoline that contains MMT. If of marketers, please go to the offi- fuel containing MMT is used, your cial website www.toptiergas.com.
  • Page 515 The malfunction indicator lamp on If poor driveability (poor hot start- the instrument cluster may come on. ing, vaporization, engine knock- If this happens, contact your Toyota ing, etc.) is encountered after dealer for service. using a different type of fuel, dis- continue the use of that type of ■...
  • Page 516: Tire Information

    8-1. Specifications Tire information Typical tire symbols Full-size tire  Compact spare tire  Tire size (P.518) DOT and Tire Identification Number (TIN) (P.517) Location of treadwear indicators (P.418) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
  • Page 517 8-1. Specifications A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
  • Page 518 8-1. Specifications Speed symbol (alphabet with DOT symbol one letter) Tire Identification Number Tire dimensions (TIN) ■ Tire manufacturer’s identifi- cation mark Manufacturer’s code Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Fed- eral Motor Vehicle Safety Stan- Section width dards.
  • Page 519 Your Toyota dealer will help answer and concrete. any questions you may have as you read this information. A tire marked C may have poor DOT quality grades traction performance.
  • Page 520 8-1. Specifications Grade C corresponds to a level of Warning: The temperature grades performance which all passenger of a tire assume that it is properly car tires must meet under the Fed- inflated and not overloaded. eral Motor Vehicle Safety Standard Excessive speed, underinflation, or No.
  • Page 521 8-1. Specifications Tire related term Meaning The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occu- pants specified in the second column of Normal occupant weight Table 1 that follows...
  • Page 522 8-1. Specifications Tire related term Meaning The load on an individual tire that is deter- mined by distributing to each axle its share of curb weight, accessory weight, and nor- Vehicle normal load on the tire mal occupant weight (distributed in accor- dance with Table 1 below), and dividing by The surface area of the rim not covered by...
  • Page 523 8-1. Specifications Tire related term Meaning A tire designed to operate at higher loads Extra load tire and at higher inflation pressures than the corresponding standard tire Groove The space between two adjacent tread ribs The layer(s) forming the inside surface of a Innerliner tubeless tire that contains the inflating medium within the tire...
  • Page 524 8-1. Specifications Tire related term Meaning A tire intended for use on passenger cars, multipurpose passenger vehicles, and Passenger car tire trucks, that have a gross vehicle weight rating (GVWR) of 10,000 lb. or less. A layer of rubber-coated parallel cords A parting of rubber compound between Ply separation adjacent plies...
  • Page 525 8-1. Specifications Tire related term Meaning The rim on which a tire is fitted for testing, Test rim and may be any rim listed as appropriate for use with that tire That portion of a tire that comes into con- Tread tact with the road A tread section running circumferentially...
  • Page 526: 8-2. Customization

    Press of the meter multi-information display, control switch to select the the navigation/multimedia desired item to be custom- system, or at your Toyota ized. dealer. Press or press and hold Customizing vehicle fea- The available settings will differ depending on if...
  • Page 527 Customizable Features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the navigation/multimedia system screen Settings that can be changed using the meter control switches Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —...
  • Page 528 8-2. Customization Default setting Customized setting Function Trip average (Aver- age fuel consump- Total average tion [after start]) (Average fuel — — Fuel economy display Tank average consumption (Average fuel con- [after reset]) sumption [after refuel]) Audio system linked dis- —...
  • Page 529 8-2. Customization Default setting Customized setting Function On (when the vehi- cle is stopped) Suggestion function — : For details about each function: P.100, 110 : The default setting varies according to country. : 4.2-inch display : AWD models : 7-inch display : Selecting this item will only change the gadget.
  • Page 530 8-2. Customization Door lock (P.131, 489) ■ Function Default setting Customized setting Driver’s door unlocked in Unlocking using a one step, all All doors unlocked — — mechanical key doors in one step unlocked in two step Shift position Automatic door locking linked door —...
  • Page 531 8-2. Customization Function Default setting Customized setting Number of consecutive As many as 2 times — — door lock operations desired Time elapsed before unlocking all the door 1.5 seconds when gripping and hold- 2 seconds — — ing the driver’s door 2.5 seconds handle : This setting can be changed when the smart door unlocking setting is set...
  • Page 532 8-2. Customization Function Default setting Customized setting Opening/closing of the back door using the Press and hold One short press — — power back door switch on the instrument panel Opening/closing of the One short press power back door using Push twice Press and hold —...
  • Page 533 8-2. Customization Function Default setting Customized setting Wireless remote control On (open only) — — linked operation Wireless remote control linked operation signal — — (buzzer) : If equipped Moon roof (P.182) ■ Function Default setting Customized setting Linked operation of com- ponents when mechani- Slide only Tilt only...
  • Page 534 8-2. Customization : Except for Canada : If equipped Rear window wiper (P.238) ■ Function Default setting Customized setting Back door opening linked rear window wiper — — stop function Washer linked rear win- — — dow wiper operation Shift position linked rear window wiper operation Only once —...
  • Page 535 8-2. Customization RSA (Road Sign Assist) (P.267) ■ Function Default setting Customized setting RSA (Road Sign Assist) — — No notification Excess speed notifica- Display only — — tion method Display and buzzer 3 mph (5 km/h) Excess speed notifica- 1 mph (2 km/h) —...
  • Page 536 8-2. Customization RCTA (Rear Cross Traffic Alert) function (P.294) ■ Function Default setting Customized setting RCTA (Rear Cross Traf- — — fic Alert) function Level 1 Buzzer volume Level 2 — — Level 3 PKSB (Parking Support Brake) (P.299) ■ Function Default setting Customized setting PKSB (Parking Support...
  • Page 537 8-2. Customization Function Default setting Customized setting Instrument panel orna- ment light and door trim — — ornament lights Time elapsed before the 15 seconds 7.5 seconds — outer foot lights turn off 30 seconds Operation of the outer foot lights when you —...
  • Page 538: 8-3. Initialization

    8-3. Initialization Items to initialize 8-3.Initialization The following items must be initialized for normal system operation after such cases as the 12-volt battery being recon- nected, or maintenance being performed on the vehicle: List of items to initialize Item When to initialize Reference •...
  • Page 539 For owners 9-1. For owners Reporting safety defects for U.S. owners....Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)...... Headlight aim instructions for Canadian owners (in French)...... HIGHLANDER HV_U...
  • Page 540: For Owners

    However, NHTSA can- not become involved in individual problems between you, your dealer, or Toyota  Déroulez la sangle diagonale Motor Sales, U.S.A., Inc. de telle sorte qu'elle passe To contact NHTSA, you may bien sur l'épaule, sans pour...
  • Page 541 9-1. For owners sécurité. Entretien et soin Traitement des ceintures de ■ sécurité Nettoyez avec un chiffon ou une éponge humidifiés avec de l'eau savonneuse tiède. Vérifiez régulièrement que les ceintures ne sont pas usées, effilochées ou entaillées excessivement. WARNING ■...
  • Page 542: Srs Airbag Instructions For Canadian Owners (In French)

    9-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
  • Page 543 9-1. For owners Coussins gonflables latéraux et rideaux SRS  Coussins gonflables latéraux avant SRS Participent à la protection du torse des occupants de siège avant Coussins gonflables rideaux SRS • Participent principalement à la protection de la tête des occupants des sièges latéraux •...
  • Page 544 9-1. For owners Coussin gonflable de genoux du conducteur Contact de boucle de ceinture de sécurité conducteur Capteurs d'impact avant Ensemble de capteurs de coussins gonflables Votre véhicule est équipé de COUSSINS GONFLABLES INTELLI- GENTS conçus selon les normes de sécurité américaines applica- bles aux véhicules à...
  • Page 545 9-1. For owners ● Si vous attachez une rallonge WARNING de ceinture de sécurité aux bou- • Inclinez légèrement le dossier cles de ceinture de sécurité du siège. avant, sans l'attacher au pêne Bien que les véhicules aient une de la ceinture de sécurité, les conception différente, un grand coussins gonflables frontaux nombre de conducteurs peu-...
  • Page 546 Un nourrisson ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nourrissons et enfants sur les sièges arrière ● Ne laissez personne s'age- du véhicule et de prévoir pour...
  • Page 547 9-1. For owners ● Évitez de faire subir des chocs WARNING ou des pressions excessives ● Ne fixez rien aux portes, à la aux parties renfermant les com- vitre du pare-brise, aux vitres posants de coussins gonflables latérales, aux montants avant et SRS ou aux portes avant.
  • Page 548 à aucune handicap physique des modifications suivantes sans consulter votre concessionnaire Toyota. Les coussins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provo- quant la mort ou de graves bless- ures.
  • Page 549: Headlight Aim Instructions For Canadian Owners (In French)

    Si vous n'arrivez pas à régler le phare en procédant de la sorte, réglage des phares confiez le véhicule à votre conces- sionnaire Toyota pour qu'il règle le  Vérifiez que le réservoir de faisceau des phares. carburant du véhicule est...
  • Page 550 9-1. For owners HIGHLANDER HV_U...
  • Page 551: Index

    Index What to do if... (Trouble- shooting) ....Alphabetical Index..HIGHLANDER HV_U...
  • Page 552: What To Do If

     If you lose your electronic keys, the risk of vehicle theft  Did you press the power increases significantly. Con- switch while firmly depress- tact your Toyota dealer imme- ing the brake pedal? diately. (P.488) (P.213)  Is the shift lever in P? The doors cannot be (P.213)
  • Page 553 What to do if... (Troubleshooting) flashing The shift lever cannot be shifted from P even if you Are the driver and the passengers depress the brake pedal wearing the seat belts? (P.463)  Is the power switch in ON?  The parking brake indicator is If you cannot release the shift lever by depressing the brake pedal with Is the parking brake released?
  • Page 554 What to do if... (Troubleshooting)  When a warning light turns on or a warning message is dis- played, refer to P.460, 470. When a problem has occurred If you have a flat tire  Stop the vehicle in a safe place and replace the flat tire with the spare tire.
  • Page 555: Alphabetical Index

    Alphabetical Index Alphabetical Index Front passenger occupant clas- sification system ....43 A/C ...........336 General airbag precautions ..39 Air conditioning filter.....433 Locations of airbags ....34 Automatic air conditioning sys- Modification and disposal of air- tem ........336 bags........42 Eco air conditioning mode..343 Side airbag operating conditions Front seat concentrated airflow ..........37...
  • Page 556 Alphabetical Index Back-up lights Points to remember ....50 Replacing light bulbs ....443 Riding with children ....49 Battery (12-volt battery) Types of child restraint system Battery checking....416 installation method ....52 If the 12-volt battery is dis- Using an anchor bracket ..62 charged ......491 Child safety Preparing and checking before...
  • Page 557 LTA (Lane Tracing Assist)..262 Driving range ....94, 103 Multi-information display 92, 102 Driving support system informa- RCTA........294 tion display......96, 106 Toyota Multi-operation touch 334 Dynamic radar cruise control Warning message ....470 with full-speed range....270 Distance until next engine oil Warning message....279 change........91...
  • Page 558 Alphabetical Index EDR (Event data recorder)..7 If your vehicle needs to be towed E-Four........320 ...........455 Elapsed time .....96, 106 If your vehicle overheats ..497 Electric motor (traction motor)71 Energy monitor .......117 Electric Power Steering (EPS) Engine ..........320 ACCESSORY mode .....216 Warning light ......463 Compartment......410 Electronic key ......128...
  • Page 559 Alphabetical Index EV indicator ......72 Fuel consumption Event data recorder (EDR)..7 Average fuel economy..94, 103 Current fuel consumption94, 103 Fuel economy ....94, 103 Fuel filler door Flat tire If the fuel filler door cannot be Tire pressure warning system opened .......488 ...........421 Refueling ......240 Vehicles with a spare tire ..474...
  • Page 560 Alphabetical Index Rear automatic air conditioning Identification system........348 Engine ........506 Seat heaters......352 Vehicle ........504 High mounted stoplight Ignition switch (power switch) Replacing light bulbs ....443 ..........213 High-voltage components ..75 Auto power off function..216 Hill-start assist control ..319 Changing the power switch Hood modes.........216 Open ........408...
  • Page 561 Alphabetical Index Front interior lights....357 Front personal lights .....357 Keyless entry Headlight switch ....229 Smart key system....146 Interior lights ......356 Wireless remote control ..129 Interior lights list ....356 Keys Rear interior lights ....357 Battery-saving function..147 Rear personal lights .....357 Electronic key.......128 Replacing light bulbs ....443 If the electronic key does not Turn signal lever ....223...
  • Page 562 Alphabetical Index Outside rear view mirrors ..177 Normal mode......316 Vanity mirrors .......382 Moon roof Door lock linked moon roof oper- “ODO TRIP” switch ....91 ation ........182 Odometer........91 Jam protection function ..182 Odometer and trip meter display Operation ......182 Display items ......91 Multi Weather Lights “ODO TRIP”...
  • Page 563 Alphabetical Index Warning message ....226 Pre-Collision System (PCS) Parking lights Function........249 Light switch ......229 PCS OFF switch ....251 Replacing light bulbs ....443 Warning light......466 Parking Support Brake function Predictive deceleration support (for rear-crossing vehicles) .312 ..........74 Function .......312 Predictive SOC control ....74 Parking Support Brake function (static objects) ......306 Function .......306...
  • Page 564 Alphabetical Index If the fuel filler door cannot be Adjustment precautions ..153 opened .......488 Child seats/child restraint system Opening the fuel tank cap ..240 installation ......50 Regenerative braking....72 Cleaning .......397 Replacing Driving position memory ..159 Electronic key battery...438 Head restraints .....162 Fuses ........439 Properly sitting in the seat ..25 Light bulbs......443...
  • Page 565 Alphabetical Index Side mirrors Switches Adjustment ......177 Activating the Automatic High BSM (Blind Sport Monitor) ...280 Beam ........232 Heaters......338, 342 Automatic High Beam system Linked mirror function when ...........232 reversing ......177 Brake Hold switch....227 Mirror position memory ..159 Digital Rearview Mirror control RCTA function ......294 switches......167 Side turn signal lights...
  • Page 566 The Secondary Collision Brake Dinghy towing .......212 ..........320 Emergency towing ....455 Theft deterrent system Trailer towing ......201 Alarm........81 Toyota Multi-operation touch 334 Immobilizer system ....79 Toyota Safety Sense 2.0 Tire inflation pressure Automatic High Beam...232 Maintenance data....511 Dynamic radar cruise control Tire inflation pressure display with full-speed range ..270...
  • Page 567 Alphabetical Index Traction battery (hybrid battery) Hybrid battery (traction battery) Warning buzzers air vents........77 ABS ........462 Location........75 Airbags .........462 Specification......508 Approach warning ....277 Warning message ....78 Brake hold ......467 Traction Control (TRAC) ..319 Brake Override System ..462 Traction motor (electric motor)71 Brake system......460 Trail Mode .......317 Charging system ....461...
  • Page 568 · Audio/visual system Warning message... 101, 111 · Rear seat entertainment sys- Warning messages....470 Washer · Rear view monitor system Adding ........415 · Toyota parking assist monitor Preparing and checking before · Panoramic view monitor winter........327 Switch......235, 238 Washing and waxing....394 Weight Cargo capacity .....200...
  • Page 569 Alphabetical Index HIGHLANDER HV_U...
  • Page 570 Alphabetical Index HIGHLANDER HV_U...
  • Page 571 Alphabetical Index HIGHLANDER HV_U...
  • Page 572 GAS STATION INFORMATION Auxiliary catch lever (P.408) Fuel filler door (P.241) Hood lock release lever (P.408) Fuel filler door opener (P.241) Power back door switch (P.137) Tire inflation pressure (P.511) Fuel tank capacity 17.1 gal. (65 L, 14.2 Imp. gal.) (Reference) Fuel type Unleaded gasoline only...

This manual is also suitable for:

Highlander hybrid 2024

Table of Contents

Save PDF