Toyota Highlander Hybrid 2020 Owner's Manual page 388

388
5-5. Using the other interior features
code programming.
1
Locate the "Learn" or "Smart"
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire is
attached to the unit. The name and
color of the button may vary by
manufacturer. Refer to the owner's
manual supplied with the garage
door opener motor for details.
2
Press and release the
"Learn" or "Smart" button.
3
Perform within 30 seconds after
performing 2.
3
Press and hold the desired
HomeLink
vehicle) for 2 seconds and
release it. Repeat this
sequence
(press/hold/release) up to 3
times to complete program-
ming.
If the garage door opener
HIGHLANDER HV_U
®
button (inside the
motor operates when the
®
HomeLink button is
pressed, the garage door
opener motor recognizes the
®
HomeLink signal.
Vehicles with auto anti-glare

inside rear view mirror
Vehicles with Digital Rearview

Mirror
Enabling 2-way communi-
■
cation with a garage door
(only available for compati-
ble devices)
When enabled, 2-way communi-
cation allows you to check the
status of the opening and clos-
ing of a garage door through
indicators in your vehicle.
2-way communication is only
available if the garage door
opener motor used is a compati-