Toyota Highlander Hybrid 2020 Owner's Manual page 168

168
3-4. Adjusting the steering wheel and mirrors
WARNING
• Change to digital mirror mode
and adjust the display settings.
● As the range of the image dis-
played by the Digital Rearview
Mirror is different from that of
the optical mirror, make sure to
check this difference before
driving.
System components
Camera indicator
Indicates that the camera is operat-
ing normally.
Icon display area
Displays icons, adjusting gauge,
etc. (P.169)
Select button
Press to change the setting of the
item you want to adjust.
Menu button
Press to display the icon display
area and select the item you want
to adjust.
Lever
Operate to change between digital
mirror mode and optical mirror
mode.
HIGHLANDER HV_U
Changing modes
Operate the lever to change
between digital mirror mode and
optical mirror mode.
1
Digital mirror mode
Displays an image of the area
behind the vehicle.
will illuminate in this mode.
2
Optical mirror mode
Turns off the display of the Digital
Rearview Mirror allows it to be used
as an optical mirror.
■ Digital mirror mode operating
condition
The power switch is turned to ON.
When the power switch is changed
from ON to OFF or ACC, the image
will disappear after several seconds.
■ When using the Digital Rear-
view Mirror in digital mirror
mode
● If it is difficult to see the displayed
image due to light reflected off the
Digital Rearview Mirror, the cam-
era being dirty, or if lights of a
vehicle behind your vehicle or the
displayed image are bothering
you, change to optical mirror
mode.
● When the back door is open, the
Digital Rearview Mirror image may
not display properly. Before driv-
ing, make sure the back door is