Toyota Highlander Hybrid 2020 Owner's Manual page 508

508
8-1. Specifications
Rear

Type
Maximum output
Maximum torque
Hybrid battery (traction battery)
Type
Voltage
Capacity
Quantity
Nominal voltage
Lubrication system
Oil capacity (Drain and
■
refillreference
4.8 qt. (4.5 L, 4.0 Imp.
With filter
qt.)
Without 4.4 qt. (4.2 L, 3.7 Imp.
filter qt.)
*
: The engine oil capacity is a refer-
ence quantity to be used when
changing the engine oil. Warm up
the engine and turn off the hybrid
system, wait more than 5 min-
utes, and check the oil level on
the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is
used in your Toyota vehicle. Use
Toyota approved "Toyota Genu-
ine Motor Oil" or equivalent to
satisfy the following grade and
viscosity.
HIGHLANDER HV_U
Permanent magnet synchronous
motor
40 kW
89 ft•lbf (121 N•m, 12.3 kgf•m)
Nickel-Metal hydride battery
7.2 V/module
6.5 Ah (3HR)
40 modules
288 V
Oil grade: API SN/RC multi-
grade engine oil
*
)
Recommended viscosity: SAE
0W-16
Outside temperature
SAE 0W-16 is the best choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-16 is not available,
SAE 0W-20 oil may be used.
However, it must be replaced