Driving Position Memory - Toyota Highlander Hybrid 2020 Owner's Manual

From outside

Pull the straps and raise the seat-
backs until they lock.
After using either strap, use the vel-
cro on the strap to attach it to the
seatback.
2
Returning the outer head
restraints.
Remove the secured seat belts
from the seat belt hangers before
using them.
HIGHLANDER HV_U
3-3. Adjusting the seats
Driving position mem-
*
ory
*
: If equipped
This feature automatically
adjusts the driver's seat,
outside rear view mirrors
and head-up display (if
equipped) to suit your pref-
erences.
Two different driving posi-
tions can be recorded into
memory.
Each electronic key can be
registered to recall your pre-
ferred driving position.
Recording a driving posi-
tion into memory
1
Check that the shift lever is in
P.
2
Turn the power switch to ON.
3
Adjust the driver's seat, out-
side rear view mirrors and
head-up display (if equipped)
to the desired positions.
4
While pressing the "SET" but-
ton, or within 3 seconds after
the "SET" button is pressed,
press button "1" or "2" until
the buzzer sounds.
If the selected button has already
been preset, the previously
recorded position will be overwrit-
159
3