Toyota Highlander Hybrid 2020 Owner's Manual page 492

492
7-2. Steps to take in an emergency
Restarting the hybrid sys-
tem
If you have a set of jumper (or
booster) cables and a second
vehicle with a 12-volt battery,
you can jump start your vehicle
by following the steps below.
1
Confirm that the electronic
key is being carried.
Vehicles with an alarm: When con-
necting the jumper (or booster)
cables, depending on the situation,
the alarm may activate and doors
locked. (P.82)
4
Connect a positive jumper cable clamp to
connect the clamp on the other end of the positive cable to
the second vehicle. Then, connect a negative cable clamp to
HIGHLANDER HV_U
2
Open the hood (P.408) and
fuse box cover.
3
Open the exclusive jump
starting terminal cover.
on your vehicle and
on