Toyota Highlander Hybrid 2020 Owner's Manual page 493

on the second vehicle and connect the clamp at the other end of
the negative cable to
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Solid, stationary, unpainted metallic point away from the exclusive
jump starting terminal and any moving parts as shown in the illus-
tration
5
Start the engine of the sec-
ond vehicle. Increase the
engine speed slightly and
maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery
of your vehicle.
6
Open and close any of the
doors of your vehicle with the
power switch OFF.
7
Maintain the engine speed of
the second vehicle and start
the hybrid system of your
vehicle by turning the power
switch to ON.
8
Make sure the "READY" indi-
cator comes on. If the indica-
HIGHLANDER HV_U
7-2. Steps to take in an emergency
.
tor light does not come on,
contact your Toyota dealer.
9
Once the hybrid system has
started, remove the jumper
cables in the exact reverse
order from which they were
connected.
10Close the exclusive jump
starting terminal cover, and
reinstall the fuse box cover to
its original position.
Once the hybrid system starts,
have the vehicle inspected at
your Toyota dealer as soon as
possible.
493
7