Toyota Highlander Hybrid 2020 Owner's Manual page 98

98
2-1. Instrument cluster
radio wave conditions.
• Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
Settings display (
Changing settings
■
Use the meter control switches
on the steering wheel to change
settings.
1
Press
control switch to select
2
Press
control switch to select the
desired item to be custom-
ized.
3
Press or press and hold
The available settings will differ
depending on if
pressed and held. Follow the
instructions on the display.
Setting items
■
 LTA (Lane Tracing Assist)
(P.257)
Press and hold
settings of the following items:
• "Lane Center"
Select to enable/disable the lane
centering function.
• "Steering Assist"
Select to enable/disable steering
wheel assistance.
• "Sensitivity"
Select to set the warning sensitivity.
HIGHLANDER HV_U
)
or of the meter
.
or of the meter
.
is pressed or
to change the
• "Sway Warning"
Select to enable/disable the vehicle
sway warning.
• "Sway Sensitivity"
Select to set the vehicle sway warn-
ing sensitivity.
 PCS (Pre-Collision Sys-
tem) (P.249)
Press to enable/disable the
pre-collision system.
• PCS (Pre-Collision System)
on/off
Select to enable/disable the
pre-collision system.
Press and hold to change the
settings of the following item:
• "Sensitivity"
Select to change the pre-collision
warning timing.
 BSM (Blind Spot Monitor)
(P.280)
Press to enable/disable the
Blind Spot Monitor function.
• BSM (Blind Spot Monitor) on/off
Select to enable/disable the Blind
Spot Monitor function.
Press and hold to change the
settings of the following items:
• "Brightness"
Select to switch the brightness of
the outside rear view mirror indica-
tors. (P.281)
• "Sensitivity"
Select to change the alert timing for
an approaching vehicle.