Toyota Highlander Hybrid 2020 Owner's Manual page 523

Tire related term
Extra load tire
Groove
Innerliner
Innerliner separation
Intended outboard sidewall
Light truck (LT) tire
Load rating
Maximum load rating
Maximum permissible inflation
pressure
Measuring rim
Open splice
Outer diameter
Overall width
HIGHLANDER HV_U
8-1. Specifications
Meaning
A tire designed to operate at higher loads
and at higher inflation pressures than the
corresponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating
medium within the tire
The parting of the innerliner from cord
material in the carcass
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an
asymmetrical tire that has a particular side
that must always face outward when
mounted on a vehicle
A tire designated by its manufacturer as
primarily intended for use on lightweight
trucks or multipurpose passenger vehicles
The maximum load that a tire is rated to
carry for a given inflation pressure
The load rating for a tire at the maximum
permissible inflation pressure for that tire
The maximum cold inflation pressure to
which a tire may be inflated
The rim on which a tire is fitted for physical
dimension requirements
Any parting at any junction of tread, side-
wall, or innerliner that extends to cord
material
The overall diameter of an inflated new tire
The linear distance between the exteriors
of the sidewalls of an inflated tire, including
elevations due to labeling, decorations, or
protective bands or ribs
523
8