Table of Contents

Advertisement

Pictorial index
For safety
and security
Vehicle status
information and
indicators
Before driving
Driving
Interior features
Maintenance
and care
When trouble
arises
Vehicle
specifications
For owners
Index
GRAND HIGHLANDER_U
Search by illustration
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Reading driving-related information
(Main topics: Meters, multi-information display)
Opening and closing the doors and windows,
adjustment before driving
(Main topics: Keys, doors, seats)
Operations and advice which are necessary for
driving
(Main topics: Starting engine system, refueling)
Usage of the interior features
(Main topics: Air conditioner, storage features)
Caring for your vehicle and maintenance
procedures
(Main topics: Interior and exterior, light bulbs)
What to do in case of malfunction and emergency
(Main topics: Battery discharge, flat tire)
Vehicle specifications, customizable features
(Main topics: Fuel, oil, tire inflation pressure)
Reporting safety defects for U.S. owners, seat belt,
SRS airbag and headlight aim instructions for
Canadian owners
Search by symptom
Search alphabetically
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents
loading

Summary of Contents for Toyota Grand Highlander 2024

  • Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats)
  • Page 2: Table Of Contents

    TABLE OF CONTENTS For your information ......Before driving Reading this manual ......13 How to search........14 Pictorial index ........15 3-1. Key information Keys ........For safety and security Digital Key......3-2. Opening, closing and locking 1-1. For safe use the doors Before driving ......28 Side doors......
  • Page 3 Opening the fuel tank cap .. cle) ........4-5. Using the driving support sys- Driving mode select switch tems ......... Toyota Safety Sense 3.0 soft- Multi-terrain Select ..... ware update ..... Snow mode switch ..... Toyota Safety Sense 3.0 ..Downhill assist control system Driver monitor.....
  • Page 4 TABLE OF CONTENTS 5-3. Using the storage features When trouble arises List of storage features ..Luggage compartment features ......... 7-1. Essential information 5-4. Using the other interior fea- Emergency flashers ... tures If your vehicle has to be stopped Other interior features ..
  • Page 5 TABLE OF CONTENTS 8-2. Customization Customizable features ..8-3. Initialization Items to initialize....For owners 9-1. For owners Reporting safety defects for U.S. owners ......Reporting safety defects for Canadian owners ..... Seat belt instructions for Cana- dian owners (in French) ... SRS airbag instructions for Canadian owners (in French) .........
  • Page 6: For Your Information

    Because of Toyota's may cause to, or adverse effect interest in continual product they may have on, your Toyota improvement, Toyota reserves vehicle. the right to make changes to this This vehicle should not be modi-...
  • Page 7 Toyota does not make any guar- Certain data, such as the follow- antees for problems caused by ing, is recorded depending on...
  • Page 8 ■ Data provision and use pur- may disclose the data recorded by pose by third parties the Toyota Safety Sense 3.0 to a third party in the following situa- Data recorded by the computers tions: may be used for collision analy-...
  • Page 9  When providing data to a If you wish to stop the collection of company involved in autono- Toyota Safety Sense 3.0 data by the Toyota servers for the purpose of mous driving software, etc. for research and development and pro-...
  • Page 10 turer may deny warranty cover- vehicle’s systems performed. The EDR is designed to record age and charge for repairs to a vehicle if it is discovered that an data related to vehicle dynamics aftermarket or recycled part and safety systems for a short period of time, typically 30 sec- installed on the vehicle is defec- tive or was installed incorrectly...
  • Page 11 “QR Code” • For use by Toyota in a lawsuit However, if necessary, Toyota may: The word “QR Code” is regis- • Use the data for research on...
  • Page 12 WARNING General precautions while ■ driving Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to oper- ate your vehicle. Alcohol and cer- tain drugs delay reaction time, impair judgment and reduce coor- dination, which could lead to an accident that could result in death...
  • Page 13: Reading This Manual

    Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual. switches and other devices. Symbols in this manual Indicates the out- come of an operation Symbols Meanings (e.g. a lid opens). WARNING: Explains something that, if not obeyed,...
  • Page 14: How To Search

    ■ How to search Searching by title  Table of contents: P.2 ■ Searching by name  Alphabetical index: P.567 ■ Searching by installation position  Pictorial index: P.15 ■ Searching by symptom or sound  What to do if... (Troubleshoot- ing): P.564...
  • Page 15: Pictorial Index

    Pictorial index Pictorial index ■Exterior The shape of the lights may differ depending on the grade, etc. Side doors ................P.115 Locking/unlocking ..............P.115 Opening/closing the side windows ........P.164 Locking/unlocking by using the mechanical key ....P.506 Warning messages .............. P.488 Back door ................
  • Page 16 Pictorial index Precautions for winter season..........P.360 To prevent freezing (windshield wiper de-icer)..... P.370 Precautions for car wash ............ P.421 Fuel filler door ..............P.231 Refueling method ..............P.231 Fuel type/fuel tank capacity ..........P.519 Tires..................P.443 Tire size/inflation pressure ........... P.443, 524 Winter tires/tire chains ............
  • Page 17 Pictorial index Shifting the shift position to R ..........P.208 License plate lights............P.218 : If equipped...
  • Page 18 Pictorial index ■Instrument panel Engine switch ..............P.203 Starting the engine/changing the modes ......P.203 Emergency stop of the engine ..........P.470 When the engine will not start ..........P.503 Warning messages .............. P.488 Shift lever................P.207 Shifting the shift position ............P.208 Precautions for towing ............
  • Page 19 Pictorial index Turn signal lever..............P.211 Headlight switch ..............P.218 Headlights/parking lights/tail lights/side marker lights/license plate lights/daytime running lights..........P.218 Front fog lights ..............P.223 Windshield wiper and washer switch....... P.224, 229 Usage................P.224, 229 Adding washer fluid.............. P.442 Warning messages .............. P.488 Emergency flasher switch..........
  • Page 20 Pictorial index ■Switches Driving position memory switches ......... P.171 Outside rear view mirror switches ........P.161 Door lock switches ............P.118 Power window switches ............ P.164 Window lock switch ............P.166 “ODO TRIP” switch ............P.82, 87 Instrument panel light control switches ...... P.83, 88 Automatic High Beam switch ...........
  • Page 21 Pictorial index Meter control switches ..........P.90, 95 Paddle shift switches ............P.209 Cruise control switch Dynamic radar cruise control ..........P.282 Cruise control ............... P.294 Audio remote control switches LTA (Lane Tracing Assist) switch ........P.257 Telephone switch Talk switch : If equipped : Refer to the “MULTIMEDIA OWNER’S MANUAL”.
  • Page 22 Pictorial index Camera switch USB charging ports ............P.397 USB port Parking brake switch ............P.212 Applying/releasing..............P.212 Precautions for winter season..........P.361 Warning buzzer/messages........... P.488 Brake hold switch .............. P.216 Stop & Start cancel switch ..........P.308 VSC OFF switch ..............P.355 Snow mode switch.............
  • Page 23 Pictorial index ■Interior 7-passenger models  Head restraints ..............P.147 Third seats ................P.143 Assist grips ................ P.406 Seat belts ................P.31 SRS airbags ................P.37 Inside lock buttons ............P.118 Floor mats................P.28 Cup holders ................ P.389 Console box ............... P.388 Front seats................
  • Page 24 Pictorial index 8-passenger models  Head restraints ..............P.147 Third seats ................P.143 Assist grips ................ P.406 Seat belts ................P.31 SRS airbags ................P.37 Inside lock buttons ............P.118 Floor mats................P.28 Cup holders ................ P.389 Console box ............... P.388 Front seats................
  • Page 25 Pictorial index ■Ceiling Auxiliary box ..............P.390 Interior light ................ P.384 Personal lights ..............P.385 Panoramic moon roof switches ........P.167 “SOS” button................ P.68 Vanity mirrors ..............P.409 Sun visors................P.409 Inside rear view mirror ............ P.151 Digital Rearview Mirror ...........
  • Page 26 Pictorial index...
  • Page 27: For Safety And Security

    For safety and security 1-1. For safe use Before driving....28 For safe driving ....29 Seat belts .......31 SRS airbags ....37 Front passenger occupant classification system ..44 Exhaust gas precautions ........49 1-2. Child safety Riding with children ..50 Child restraint systems...51 1-3.
  • Page 28: Before Driving

    Do not use floor mats designed ● (clips) into the floor mat eye- for other models or different model year vehicles, even if lets. they are Toyota Genuine floor mats. Only use floor mats designed ● for the driver’s seat. Always install the floor mat ●...
  • Page 29: For Safe Driving

    1-1. For safe use For safe driving WARNING Before driving ■ For safe driving, adjust the Check that the floor mat is ● securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
  • Page 30 1-1. For safe use child becomes large enough to WARNING properly wear the vehicle’s seat For safe driving ■ belt. (P.51) Observe the following precau- tions. Adjusting the mirrors Failure to do so may result in death or serious injury. Make sure that you can see Do not adjust the position of the ●...
  • Page 31: Seat Belts

    If the seat belt is not worn prop- Toyota recommends that chil- ● erly, not only the pregnant dren be seated in the rear seat woman, but also the fetus could...
  • Page 32 This feature is used to any necessary repairs carried hold the child restraint system out by your Toyota dealer. Inap- (CRS) firmly. To free the belt again, propriate handling may lead to fully retract the belt and then pull the incorrect operation.
  • Page 33 1-1. For safe use Fastening and releasing the seat belt (except for the third center seat) WARNING Using a seat belt extender ■ Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident.
  • Page 34 1-1. For safe use Fastening the seat belt WARNING (for the third center seat) When using the third center ■ seat belt Take the plate out of the holder, and then pull down the seat belt. Do not use the third center seat belt with either buckle released.
  • Page 35 1-1. For safe use anchor up while pressing the ing and stowing the seat belt. release button Move the height adjuster up and down as needed until you hear a click. WARNING Adjustable shoulder anchor ■ Always make sure the shoulder belt is positioned across the cen- ter of your shoulder.
  • Page 36 If a pretensioner has operated, ● the SRS warning light will illumi- nate. In this situation, the seat belt cannot be used and must be replaced by your Toyota dealer.
  • Page 37: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags deploy when the vehicle is subjected to cer- tain types of severe impact that may cause significant injury to the occupants. The airbags work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system SRS driver airbag/front passenger airbag Help reduce impact to the head and chest of the driver and front passenger...
  • Page 38 1-1. For safe use Your vehicle is equipped with ADVANCED AIRBAGS designed based on US motor vehicle safety standards (FMVSS208). The air- bag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors, etc., shown in the system components diagram above.
  • Page 39 1-1. For safe use senger’s seat will not deploy if there is no passenger in the front passenger seat. However, the SRS airbags for the front passen- ger’s seat may deploy, even if the seat is unoccupied, if luggage is put on the seat.
  • Page 40 ● When the seat cushion surface is ■ When to contact your Toyota scratched, cracked, or otherwise dealer damaged. In the following situations, the vehi- ● When the surface of a seat with...
  • Page 41 1-1. For safe use • Slightly recline the seatback. WARNING Although vehicle designs vary, SRS airbag precautions ■ many drivers can achieve the 10 in. (251 mm) distance, even Observe the following precau- with the driver seat all the way tions.
  • Page 42 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
  • Page 43 If a part where an SRS airbag is ● stored is damaged or cracked, have it replaced by your Toyota Do not hang coat hangers or ● dealer. other hard objects on the coat hooks.
  • Page 44: Front Passenger Occupant Clas- Sification System

    1-1. For safe use Front passenger occu- WARNING pant classification • Dashboard system • Seats • Seat upholstery Your vehicle is equipped with a front passenger • Front pillars occupant classification sys- • Side pillars tem. • Rear pillars This system detects the •...
  • Page 45 1-1. For safe use System components Make sure the “AIR BAG OFF” ● indicator light is not illuminated when using the seat belt extender for the front passenger seat. If the “AIR BAG OFF” indi- cator light is illuminated, discon- nect the extender tongue from the seat belt buckle, and recon- nect the seat belt.
  • Page 46 In this case, which indicates that the SRS contact your Toyota dealer airbags for the front passenger immediately. will not activate in the event of a severe accident. If the seatback Child restraint systems installed ●...
  • Page 47 1-1. For safe use Front passenger occupant classification system condi- tions and operation ■ Adult “AIR BAG ON” and “AIR BAG “AIR BAG ON” OFF” indicator lights Indicator/warning SRS warning light light Front passenger’s seat belt or flashing reminder light Front passenger airbag Activated Devices...
  • Page 48 1-1. For safe use ■ Unoccupied “AIR BAG ON” and “AIR BAG “AIR BAG OFF” OFF” indicator lights Indicator/warning SRS warning light light Front passenger’s seat belt reminder light Front passenger airbag Devices Deactivated Seat cushion airbag in the front passenger side ■...
  • Page 49: Exhaust Gas Precautions

    Observe have the vehicle inspected and the following precautions. repaired by your Toyota dealer. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident...
  • Page 50: 1-2. Child Safety

    1-2. Child safety Riding with children 1-2.Child safety WARNING When children are in the vehi- ■ Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
  • Page 51: Child Restraint Systems

    1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
  • Page 52 1-2. Child safety WARNING Toyota strongly urges the use of ● a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 53 1-2. Child safety Child restraint system ■ Types of child restraint system installation methods Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.57...
  • Page 54 1-2. Child safety Installation method Page Second outboard seats (8-passenger models): Second seats (7-passenger models): Child restraint LATCH P.62 anchors attachment Third right seat:...
  • Page 55 1-2. Child safety Installation method Page Second seats (8-passenger models): Second seats (7-passenger models): Anchor brackets (for top tether strap) attach- P.65 ment Third center and right seats: seats. When installing child When using a child restraint system to a front pas- restraint system senger seat is unavoidable, ■...
  • Page 56 1-2. Child safety upper most position. A forward-facing child restraint ● system may be installed on the  Adjust the seatback angle to front passenger seat only when the most upright position. it is unavoidable. A child restraint system that requires a If there is a gap between the child top tether strap should not be seat and the seatback, adjust the...
  • Page 57 1-2. Child safety If the driver’s seat interferes WARNING ● with the child restraint system Do not allow the child to lean ● and prevents it from being his/her head or any part of attached correctly, attach the his/her body against the door or child restraint system to the the area of the seat, front or rear right-hand rear seat.
  • Page 58 1-2. Child safety Place the child restraint sys- the rear seat, allow the shoul- tem on the rear seat facing der belt to retract until the the rear of the vehicle. child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 59 1-2. Child safety Remove the head restraint if in lock mode. In lock mode, it interferes with your child the belt cannot be extended. restraint system. (P.147) While pushing the child Place the child restraint sys- restraint system into the rear tem on the seat facing the seat, allow the shoulder belt front of the vehicle.
  • Page 60 1-2. Child safety and forth to ensure that it is High back type  installed securely. (P.61) ■ Booster seat If installing the child restraint system to the front passen- ger seat is unavoidable, refer to P.55for the front passenger seat adjustment.
  • Page 61 1-2. Child safety system. When a booster seat is ● installed, always ensure that the Since the seat belt automatically shoulder belt is positioned reels itself, slowly return it to the across the center of the child’s stowing position. shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
  • Page 62 1-2. Child safety Child restraint system fixed with a child restraint LATCH anchor ■ Child restraint LATCH anchors LATCH anchors are provided for the following seats. ■ When installing in the sec- Second outboard seats  ond outboard seats (8-pas- (8-passenger models) senger models) or second seats (7-passenger models)
  • Page 63 1-2. Child safety If the child restraint has a top restraint system indicates tether strap, follow the child the presence of a lower con- restraint manufacturer’s nector system. operation manual regarding the installation, using the top tether strap to latch onto the top tether strap anchor.
  • Page 64 1-2. Child safety If there is a gap between the child the presence of a lower con- seat and the seatback, adjust the nector system. seatback angle until good contact is achieved. Widen the slit in the seatback slightly. With flexible lower attach- ...
  • Page 65 1-2. Child safety Using an anchor bracket WARNING (for top tether strap) When installing a child ■ restraint system Anchor brackets (for top ■ Observe the following precau- tether strap) tions. Failure to do so may result in Anchor brackets are provided death or serious injury.
  • Page 66 1-2. Child safety Third center and right seats Second seats (8-passenger   models) Anchor brackets Hook Top tether strap Top tether strap ■ Fixing the top tether strap to the anchor bracket Second seats (7-passenger  models) Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
  • Page 67 1-2. Child safety If the seat is adjusted, reconfirm ● Laws and regulations pertain- ■ the security of the child restraint ing to anchors system. The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 speci- fications can be used.
  • Page 68: 1-3. Emergency Assistance

    Helps drivers in the event of vehicle theft. (P.70) the United States,  Emergency Assistance Button Toyotapr.com in Puerto Rico and Toyota.ca in Canada. All (“SOS”) use of the Safety Connect Connects drivers to response-cen- service is subject to such ter support.
  • Page 69 A variety of subscription terms Rico and Canada. are available for purchase. Con- ● Automatic Collision Notification, tact your Toyota dealer, call the Emergency Assistance, Stolen Vehicle and Enhanced Road following appropriate Customer Assistance are not available in the Experience Center or push the U.S.
  • Page 70 ■ Automatic Collision Notifi- parties to locate your vehicle. cation Further information is available at Toyota.com in the United In case of either airbag deploy- States, Toyotapr.com in Puerto ment or severe rear-end colli- Rico and Toyota.ca in Canada. sion, the system is designed to automatically call the response ■...
  • Page 71 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
  • Page 72: 1-4. Theft Deterrent System

    1-4. Theft deterrent system Engine immobilizer 1-4.Theft deterrent system System maintenance ■ system The vehicle has a mainte- nance-free type engine immobilizer system. The vehicle’s keys have Conditions that may cause the ■ built-in transponder chips system to malfunction that prevent the engine from If the grip portion of the key is in ●...
  • Page 73: Alarm

    1-4. Theft deterrent system Alarm The indicator light changes from being on to flashing when the sys- tem is set. The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ...
  • Page 74 1-4. Theft deterrent system sound for 10 seconds. If either the door is locked again or the pre-alarm is stopped within those 10 seconds, an alarm will sound. Do any of the following in order to deactivate or stop the The battery is recharged or ●...
  • Page 75: Vehicle Status Information And Indicators

    Vehicle status information and indicators 2-1. Instrument cluster Warning lights and indica- tors .......76 Gauges and meters (7-inch display)......81 Gauges and meters (12.3-inch display)..84 Multi-information display (7-inch display).....89 Multi-information display (12.3-inch display)..95 Head-up display ..Fuel consumption informa- tion ......
  • Page 76: 2-1. Instrument Cluster

    2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, front interior/personal lights and outside rear view mirrors inform the driver of the status of the vehicle’s various sys- tems. Warning lights and indicators displayed on the instru- ment cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
  • Page 77 2-1. Instrument cluster Low fuel level warning Warning lights light(P.479) Warning lights inform the driver Driver’s and front passen- ger’s seat belt reminder of malfunctions in the indicated light (P.480) vehicle’s systems. Rear passengers’ seat Brake system warning belt reminder light light (P.477) (P.480)
  • Page 78 LDA OFF indicator (if help protect you in an accident, equipped) (P.269) which could result in death or seri- ous injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs. PDA indicator (P.275) (green/w hite) Indicators...
  • Page 79 Parking brake indica- light does not come on, or turn tor(P.212) off. Have the vehicle inspected (Canada) by your Toyota dealer. Brake hold standby indi- : This light comes on when the cator (P.216) system is turned off.
  • Page 80 2-1. Instrument cluster ■ Intuitive parking assist OFF indicator Vehicles without Multimedia Dis- play: The indicators turn off when the shift position is changed to R regardless of whether the intuitive parking assist function is turned on or off.
  • Page 81: Gauges And Meters (7-Inch Display)

    2-1. Instrument cluster Gauges and meters (7-inch display) Meter display ■ Locations of gauges and meters The units used on the meters may differ depending on the target region. Engine coolant temperature gauge Displays the engine coolant temperature Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 141°F (60°C) Speedometer/Tachometer...
  • Page 82 When “--” or “E” is displayed, the ● system may be malfunctioning. For example, there is a lag Take your vehicle to your Toyota between the driver’s shifting and dealer. the new gear number appearing on the display. This lag could Driving range ■...
  • Page 83 2-1. Instrument cluster Displays the total distance the vehi- cle has been driven.  Trip meter A/trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
  • Page 84: Gauges And Meters (12.3-Inch Display)

    2-1. Instrument cluster Gauges and meters (12.3-inch display) Meter display ■ Locations of gauges and meters 2-dial type  The units used on the meters may differ depending on the target region. Tachometer Displays the engine speed in revolutions per minute Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 141°F (60°C)
  • Page 85 2-1. Instrument cluster Driving range Displays driving range with remaining fuel. 1-dial display  The units used on the meters may differ depending on the target region. Multi-information display Presents the driver with a variety of vehicle data (P.95) Displays warning messages if a malfunction occurs (P.488) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 141°F (60°C)
  • Page 86 2-1. Instrument cluster Non-dial display  The units used on the meters may differ depending on the target region. Multi-information display Presents the driver with a variety of vehicle data (P.95) Displays warning messages if a malfunction occurs (P.488) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 141°F (60°C) Speedometer...
  • Page 87 2-1. Instrument cluster Take your vehicle to your Toyota For example, there is a lag dealer. between the driver’s shifting and the new gear number appearing Driving range ■ on the display. This lag could Use the displayed values as a ref- ●...
  • Page 88 2-1. Instrument cluster necessary. ● Night mode: When the tail lights ■ Changing the display are on and the surrounding area is Each time the “ODO TRIP” dark switch is pressed, the displayed When the tail lights are on but the surrounding area is bright, any item will be changed.
  • Page 89: Multi-Information Display (7-Inch Display)

    2-1. Instrument cluster • Dynamic radar cruise control Multi-information dis- (P.282) play (7-inch display) • Cruise control (P.294) • PDA (Proactive driving assist) Display and menu icons (P.271) Menu icons ■ Display ■ The menu icons will be dis- played by pressing the meter control switch.
  • Page 90 2-1. Instrument cluster Content of driving infor- WARNING mation The information display at ■ low temperatures Display items ■ P.82  Fuel economy Changing the meter dis-  Eco Driving Indicator play Fuel economy ■ Use the displayed values as a ref- The multi-information display is erence only.
  • Page 91 2-1. Instrument cluster Displays the average fuel con- ■ Eco Driving Indicator sumption since the vehicle was Eco Driving Indicator will not oper- refueled. ate under the following conditions: ■ Eco Driving Indicator ● The shift position is in a position other than D.
  • Page 92 2-1. Instrument cluster  Compass display  After start • Distance: Displays the distance Audio system-linked dis- driven since engine start play • Elapsed time: Displays the elapsed time since engine start Select to enable selection of an • Average vehicle speed: Displays audio source or track on the the average vehicle speed since meter using the meter control...
  • Page 93 2-1. Instrument cluster wheel in 6 steps from 0 to 5. Select to display/not display AWD operation status display. Settings display • Drive information type Select to change the drive informa- ■ Meter display settings that tion type display between trip infor- can be changed mation/total information.
  • Page 94 2-1. Instrument cluster After enabling the power back door WARNING system, press the power back door Cautions during setting up ■ switch again to open or close the the display power back door. If the engine is running when changing the display settings, ensure that the vehicle is parked in a place with adequate ventila- tion.
  • Page 95: Multi-Information Display (12.3-Inch Display)

    2-1. Instrument cluster • PDA (Proactive Driving Assist) Multi-information dis- (P.271) play (12.3-inch dis- play) Liquid crystal display ■ Small spots or light spots may Display appear on the display. This phenom- enon is characteristic of liquid crys- tal displays, and there is no problem continuing to use the display.
  • Page 96 2-1. Instrument cluster tion display Content of multi-informa- : Change displayed tion display (Center) content, scroll up/down the ■ Display contents screen and move the cursor  Driving support system infor- up/down mation display Press: Enter/Set  Navigation system-linked dis- Press and hold: Reset/Dis- play customizable items play...
  • Page 97 2-1. Instrument cluster  LTA (Lane Tracing Assist) 1 dial: Select to change the display of the speedometer or tachometer. (P.257) • Eco Driving Indicator Light  LDA (Lane Departure Alert) Select to enable/disable the Eco (P.265) Driving Indicator Light. ...
  • Page 98 2-1. Instrument cluster Changing contents in a ■ WARNING page Cautions during setting up ■ P.96 the display If the engine is running when Changing contents to be ■ changing the display settings, displayed on the side ensure that the vehicle is parked multi-information displays in a place with adequate ventila- tion.
  • Page 99 2-1. Instrument cluster ■ Eco Driving Indicator Current fuel consumption Displays instantaneous current fuel consumption. Average fuel economy The average fuel economy dis- Eco Driving Indicator Light play can be changed in During Eco-friendly acceleration (P.97) (Eco driving), the Eco Driving Indi- ...
  • Page 100 2-1. Instrument cluster  Route guidance to destination ■ Drive information of TRIP  Compass display ■ Audio system-linked dis- play Displays the audio source or track. ■ Drive information Drive information of trip A/B 1 Drive information of trip A/B 2 Displays the following depend- ing on which drive information type and drive information items...
  • Page 101 2-1. Instrument cluster Torque distribution display ■ Customization Displays the drive status of each Some functions can be customized. wheel in 6 steps from 0 to 5. (P.538) ■ Eco Driving Indicator Eco Driving Indicator will not oper- ate under the following conditions: ●...
  • Page 102: Head-Up Display

    2-1. Instrument cluster Head-up display and may vary slightly from actual conditions. Content display area : If equipped • Driving support system informa- The head-up display proj- tion display (P.105) ects a variety of driv- • Tachometer ing-related information and Displays the engine speed in revo- the operating state of the lutions per minute...
  • Page 103 2-1. Instrument cluster Shift position and gear posi- WARNING tion indicator (P.207) Before using the head-up dis- ■ play Speed limit/RSA (Road Sign Assist) display area (if Check that the position and ● brightness of the head-up dis- equipped) play image does not interfere Displays the following items: with safe driving.
  • Page 104 2-1. Instrument cluster Using the head-up display play can be adjusted on of the multi-information display. Also, it is automatically adjusted according to Changing settings of the ■ the ambient brightness. head-up display Automatic adjustment of the ■ head-up display position (vehi- Select on the multi-informa- cles with driving position mem-...
  • Page 105 2-1. Instrument cluster which are linked to the naviga- Driving support system tion system: information display  Street name Displays the operational status  Route guidance to destination of the following systems: ■ Warning message  PCS (Pre-Collision System) Some warning messages are (P.245) displayed when necessary, ...
  • Page 106: Fuel Consumption Information

    2-1. Instrument cluster Fuel consumption acceleration information Zone of Eco driving Displayed content is the same as that displayed on the multi-informa- Fuel consumption informa- tion display (Eco Driving Indicator). tion can be displayed on the For details, refer to P.99. Multimedia Display.
  • Page 107 2-1. Instrument cluster 15 minutes The image is an example only, and may vary slightly from actual condi- Current fuel consumption tions. Average vehicle speed since ■ the engine was started. Updating the history data Update the latest fuel consumption Elapsed time since the by selecting “Update”...
  • Page 108 2-1. Instrument cluster...
  • Page 109: Before Driving

    Before driving 3-1. Key information Keys ......Digital Key....3-2. Opening, closing and locking the doors Side doors....Power back door ..Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
  • Page 110: Key Information Keys

    • Operating the smart key system tronic key may be damaged, it is (P.136) recommended that replacement is • Operating the wireless remote carried out by your Toyota dealer. control function (P.111) ● To avoid serious deterioration, do Mechanical keys not leave the electronic key within 3 ft.
  • Page 111 The number of keys already regis- tered to the vehicle can be con- Do not place the keys near ● firmed. Ask your Toyota dealer for medical electrical equipment details. such as low-frequency therapy equipment or microwave ther- If “A New Key has been Regis-...
  • Page 112 Sounds the alarm key battery is depleted or the entry function does not operate properly, : These settings must be custom- you will need the mechanical key. ized at your Toyota dealer. (P.506) : If equipped ■ Theft deterrent panic mode...
  • Page 113: Digital Key

    Digital key usage condi- tions In order to use the Digital Key, you need to install the Toyota App. Register the Vehicle to the customer’s Toyota App profile, and subscribe to Remote Ser- vices, and enroll in Digital Key.
  • Page 114 If the smartphone is lost or stolen, contact your Toyota dealer immedi- the Digital Key will also be ately. disabled.  When taking your vehicle to a ...
  • Page 115: The Doors

    Grip the driver’s door handle : This setting must be customized to unlock the door. Holding at your Toyota dealer. the driver’s door handle for : If equipped approximately 2 seconds unlocks all the doors. Grip ■...
  • Page 116 3-2. Opening, closing and locking the doors continuously, release the buttons, locked/unlocked. (Locked: Once; wait for at least 5 seconds, and Unlocked: Twice) repeat step 2.) A buzzer sounds to indicate that the windows and the panoramic moon Multi-informa- Unlocking func- roof are operating.
  • Page 117 3-2. Opening, closing and locking the doors If the smart key system or the or it may operate unnecessarily. ■ wireless remote control does The rear seat reminder function can not operate properly be enabled/disabled. (P.538) Use the mechanical key to lock and Customization ■...
  • Page 118 3-2. Opening, closing and locking the doors ■ Open door warning buzzer Unlocking and locking the If a door or the hood is not fully doors from the inside closed, a buzzer will sound when the vehicle speed reaches 3 mph (5 ■...
  • Page 119: Power Back Door

    3-2. Opening, closing and locking the doors Power back door Function Operation All doors are auto- The power back door can be matically locked Speed linked when vehicle opened using the power door locking speed is approxi- back door opener switch, function mately 12 mph (20 smart key system or wire-...
  • Page 120 3-2. Opening, closing and locking the doors Use caution when opening or WARNING ● closing the power back door in When children are in the vehi- ■ windy weather as it may move abruptly in strong wind. Observe the following precau- The power back door may sud- ●...
  • Page 121 When installing an accessory part to Opening/closing the power the power back door, using a ■ genuine Toyota part is recom- back door using the wire- mended. less remote control Press and hold the switch for Unlocking and locking the approximately 1 second.
  • Page 122 [Walk-Away] function) key, press and hold the back door : This setting can be customized opener switch. by your Toyota dealer. A buzzer will sound and the power Close all of the doors except back door will automatically open.
  • Page 123 (close & lock func- (Walk-Away) function will go into tion) standby. : This setting can be customized by your Toyota dealer. Press the switch. The power back door will close and all of the doors will be locked at the same time.
  • Page 124 3-2. Opening, closing and locking the doors Vehicles with tow hitch  ■ Hands Free Power Back Door (if equipped) Kick sensor While carrying an electronic Hands Free Power Back key, stand within the smart Door operation detection key system operation range, area approximately 19.7 to 23.6 in.
  • Page 125 Door operation detection : If equipped area : This setting can be customized Smart key system operation by your Toyota dealer. detection area (P.136) While carrying an electronic Perform a kick operation by key, stand within the smart moving your foot to within key system operation range, approximately 3.9 in.
  • Page 126 3-2. Opening, closing and locking the doors  Perform the entire kick opera- While the buzzer is sounding, tion within 1 second. move away from the back door.  The Hands Free Power Back Door will not start operating When the sensor detects that you are away from the back door, the while a foot is detected under emergency flashers will flash, and...
  • Page 127 3-2. Opening, closing and locking the doors ● The back door closer can function tion. when the engine switch is in any ● If anything obstructs the power mode. back door while opening, a buzzer ● The power back door can be will sound and the power back opened using the back door door will stop immediately.
  • Page 128 3-2. Opening, closing and locking the doors door will lock and then the power your Toyota dealer. back door will lock when it is com- ■ Situations in which the close & pletely closed. lock (Walk-Away) function Close all of the doors, except the not operate properly power back door.
  • Page 129 ● : This setting can be customized by When mud, snow, ice, etc. is attached to the rear bumper your Toyota dealer. ● When the vehicle has been ■ Hands Free Power Back Door parked for a while near objects...
  • Page 130 : If equipped ● When the vehicle is being towed : This setting can be customized To prevent unintentional operation, by your Toyota dealer. turn the Hands Free Power Back Door (kick sensor) operation setting ■ If the power back door stops off.
  • Page 131 3-2. Opening, closing and locking the doors Loosen the screw. WARNING Back door closer ■ In the event that the power back ● door is left slightly open, the back door closer will automati- cally close it to the fully closed position.
  • Page 132 3-2. Opening, closing and locking the doors If a bicycle carrier or similar WARNING ● heavy object is attached to the If the power back door system is ● power back door, the power disabled while the power back back door may not operate, door is operating, the power causing a malfunction, or the back door will stop operating.
  • Page 133 Free Power Back Door, be care- Do not attach any accessories ● ful not to touch the exhaust other than genuine Toyota parts pipe. to the power back door. Do not place your hand on the Do not operate the Hands Free ●...
  • Page 134 Power Back Door operates. If it does not operate, have the vehi- Before leaving the vehicle, make cle inspected by your Toyota sure that the operational signals dealer. have operated and that all of the doors are locked.
  • Page 135 3-2. Opening, closing and locking the doors buzzer will sound 4 times. NOTICE  The next time the power back If a bicycle carrier or similar ● door is opened, it will stop at heavy object is attached to the power back door, disable the that position.
  • Page 136: Smart Key System

    3-2. Opening, closing and locking the doors ■ Smart key system Effective range (areas within which the electronic key is detected) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
  • Page 137 3-2. Opening, closing and locking the doors ● ■ When an interior alarm sounds Turning an electronic key to continuously battery-saving mode When battery-saving mode is set, Correction Situation battery depletion is minimized by procedure stopping the electronic key from receiving radio waves.
  • Page 138 3-2. Opening, closing and locking the doors waves or electrical noise (P.506) ● When the electronic key is in con- If the engine cannot be started using tact with, or is covered by the fol- the smart key system, refer to P.507 lowing metallic objects •...
  • Page 139 3-2. Opening, closing and locking the doors ● used to lock the doors when the If there is another electronic key in electronic key is near the vehicle, the detection area, it may take there is a possibility that the door slightly longer to unlock the doors may not be unlocked by the entry after the door handle is gripped.
  • Page 140 3-2. Opening, closing and locking the doors refer to P.507 Ask your Toyota dealer for details on disabling the entry function. Customization ■ Some functions can be customized. (P.538) If the smart key system has ■ been deactivated in a custom-...
  • Page 141: Adjusting The Seats

    3-3. Adjusting the seats Front seats 3-3.Adjusting the seats Adjustment procedure WARNING When adjusting the seat posi- ■ tion Take care when adjusting the ● seat position to ensure that other passengers are not injured by the moving seat. Do not put your hands under the ●...
  • Page 142: Rear Seats

    3-3. Adjusting the seats Rear seats When folding the rear seat- ■ backs down Observe the following precau- The seat position and seat- tions. Failure to do so may result back angle can be adjusted, in death or serious injury. and the seatback can be Do not fold the seatbacks down ●...
  • Page 143 3-3. Adjusting the seats 7-passenger models  Adjustment procedure ■ Second seats 8-passenger models  Seatback angle adjustment lever Seat position adjustment Seatback angle adjustment lever lever ■ Third seats Seat position adjustment lever Seatback angle adjustment lever...
  • Page 144 3-3. Adjusting the seats Stow the second seat belt Moving a second seat for buckles. third seat access ■ When entering/exiting the vehicle Pull the seatback angle adjust- ment lever to tilt the seatback forward and then slide the seat forward. Make sure that the second seat is free of passengers and obstruc- Pass the outer seat belts...
  • Page 145 3-3. Adjusting the seats arately. Folding down the third seats ■ Before folding down the third seats Pull the seatback folding Stow the third seat belt buck- lever to unlock the seatback. les. The seatback will be folded down. Pass the outer seat belts through the seat belt hangers ■...
  • Page 146 3-3. Adjusting the seats Lower the center head restraint to the lowest posi- tion. (P.147) ■ Folding down the third seats While pulling the seatback angle adjustment lever, fold down the seatbacks. Returning the outer head The outer head restraints will fold restraints.
  • Page 147: Head Restraints

    3-3. Adjusting the seats Down Head restraints Push the head restraint down while pressing the lock release button Head restraints are provided Second seats for all seats. ■ WARNING Head restraint precautions ■ Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
  • Page 148 3-3. Adjusting the seats Second seats  ■ Adjusting the height of the head restraints Make sure that the head restraints Third center seat  are adjusted so that the center of the head restraint is closest to the top of your ears. ■...
  • Page 149 3-3. Adjusting the seats Second seats  Third center seat ...
  • Page 150: Adjusting The Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors After adjusting the steering ■ wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
  • Page 151: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors vehicles behind, the reflected Inside rear view mir- light is automatically reduced. To prevent sensor error ■ : If equipped To ensure that the sensors operate The rear view mirror’s posi- properly, do not touch or cover tion can be adjusted to them.
  • Page 152: Digital Rear-View Mirror

    3-4. Adjusting the steering wheel and mirrors Digital Rear-view Mir- • Change to digital mirror mode and adjust the display settings. As the range of the image dis- ● played by the Digital Rear-view : If equipped Mirror is different from that of The Digital Rear-view Mirror the optical mirror, make sure to check this difference before...
  • Page 153 3-4. Adjusting the steering wheel and mirrors ● (P.154) When it is raining, if the image is unclear due to water on the rear window, operate the rear wiper. Changing modes ● When the back door is open, the Digital Rear-view Mirror image Operate the lever to change may not display properly.
  • Page 154 3-4. Adjusting the steering wheel and mirrors the lever, change to optical mirror The icons will be displayed. mode and have the vehicle inspected by your Toyota dealer. Press the menu button Adjusting the mirror repeatedly and select the item you want to adjust.
  • Page 155 3-4. Adjusting the steering wheel and mirrors ■ Enabling/disabling the Icons Settings automatic anti-glare func- Select to enable/dis- tion (optical mirror mode) able the automatic The automatic anti-glare func- anti-glare function. tion in the optical mirror mode Responding to the can be enabled/disabled.
  • Page 156 If the driver continues using the Digital Rear-view Mirror while smoke or odor comes from the mirror, it may result in fire. Stop using the system immediately and contact your Toyota dealer. Cleaning the Digital Rear- WARNING view Mirror Observe the following precau- tions.
  • Page 157 • Do not strike or hit the camera If this happens, have the vehicle or subject it to a strong impact, inspected by your Toyota dealer as the camera installation posi- as soon as possible. tion and angle may be changed.
  • Page 158 3-4. Adjusting the steering wheel and mirrors Symptom Likely cause Solution Clean the mirror surface The mirror surface is dirty. gently, using a soft dry cloth. Change to optical mirror mode. Sunlight or headlights are (If the light is coming shining directly into the Dig- through the panoramic ital Rear-view Mirror.
  • Page 159 The camera or its surround- alignment. mode and have the vehi- ing area has received a cle inspected by your strong impact. Toyota dealer. The display is dim Change to optical mirror is dis- The system may be mal- mode and have the vehi- played.
  • Page 160 Mirror will turn off.) pear even though the mirror is cool, have the vehicle inspected by your Toyota dealer. Change to optical mirror mode and have the vehi- cle inspected by your Toyota dealer. The lever cannot be...
  • Page 161: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors Vehicles with outer mirror Outside rear view mir-  electric storage switch rors The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. When using the outside rear ■...
  • Page 162 3-4. Adjusting the steering wheel and mirrors When the normal position is changed, readjust the angle in Right reversing. Auto anti-glare function (if ■ Down equipped) Left When the anti-glare inside rear view mirror is set to automatic mode, the outside rear view mirrors will acti- Mirror angle can be adjusted ■...
  • Page 163 3-4. Adjusting the steering wheel and mirrors WARNING When a mirror is moving ■ To avoid personal injury and mir- ror malfunction, be careful not to get your hand caught by the mov- ing mirror. Setting automatic mode ■ Automatic mode allows the fold- ing or extending of the mirrors to be linked to locking/unlocking of the doors.
  • Page 164 3-5. Opening, closing the windows and moon roof Power windows dow frame while the window is clos- 3-5.Opening, closing the windows and moon roof ing, window movement is stopped and the window is opened slightly. ■ Opening and closing the Catch protection function power windows If an object becomes caught...
  • Page 165 If the window reverses and cannot operate the power windows. It is be fully closed or opened, have the possible for children and other vehicle inspected by your Toyota passengers to have body parts dealer. caught in the power window.
  • Page 166 3-5. Opening, closing the windows and moon roof opened and closed using the WARNING driver’s switch even if the lock When exiting the vehicle, turn ● switch is on. the engine switch off, carry the key and exit the vehicle along with the child.
  • Page 167: Panoramic Moon Roof

    3-5. Opening, closing the windows and moon roof Panoramic moon roof tilted up, the electronic sunshade will open to the half-open position of the roof. : If equipped : Lightly press the switch again Use the overhead switches to stop the panoramic moon roof to operate the panoramic partway.
  • Page 168 (P.506) procedure correctly, have the vehi- ● The panoramic moon roof can be cle inspected by your Toyota dealer. opened using the wireless remote ■ Panoramic moon roof open control. (P.115) warning buzzer ●...
  • Page 169 3-5. Opening, closing the windows and moon roof play in the instrument cluster when Opening and closing the pan- ■ the engine switch is turned off and oramic moon roof the driver’s door is opened with the The driver is responsible for ●...
  • Page 170 3-5. Opening, closing the windows and moon roof Do not continuously press the WARNING ● switch or switch after When exiting the vehicle, turn ● the panoramic moon roof has the engine switch off, carry the been fully opened or closed. key and exit the vehicle along with the child.
  • Page 171: Favorite Settings

    3-6. Favorite settings ten. Driving position mem- 3-6.Favorite settings : If equipped This feature automatically adjusts the driver’s seat, outside rear view mirrors and head-up display (if equipped) to make entering and exiting the vehicle eas- Seat positions that can be ■...
  • Page 172 3-6. Favorite settings to recall until the buzzer ■ Using the voice control system sounds. : If equipped The following operations can be performed using the voice control system: ● Driving position registration ● Driving position recall (only when the shift position is in P) For details, refer to the “MULTIME- DIA OWNER’S MANUAL”...
  • Page 173 3-6. Favorite settings head-up display (if equipped) will formed successfully, the seat, out- move to the recorded position. side rear view mirrors and head-up If the driving position is in a position display (if equipped) (only when the that has already been recorded, the engine switch is turned on) will driving position will not move.
  • Page 174 3-6. Favorite settings door lock switch (either lock driver’s door. or unlock) until the buzzer If 2 or more keys are in the vehi- sounds. cle, the driving position cannot If the button could not be regis- be canceled properly. tered, the buzzer sounds continu- Check that the shift position ously for approximately 3 seconds.
  • Page 175: My Settings

    3-6. Favorite settings My Settings the front seat, the front seat will stop and then slightly move forward. When the jam protection function operates, the seat stops at a posi- : If equipped tion other than the set seat position. By identifying an individual Check the seat position.
  • Page 176 3-6. Favorite settings ual, the driving position is not  Face authentication system recalled. An individual is identified at the • When an individual is identified opening/closing of the door when from an electronic key: Unlocking face information registered using the doors using the smart key the driver monitor camera is identi- system or wireless remote control...
  • Page 177: Driving

    Driving 4-5. Using the driving support 4-1. Before driving systems Driving the vehicle..Toyota Safety Sense 3.0 Cargo and luggage ..software update..Vehicle load limits ..Toyota Safety Sense 3.0 Trailer towing (vehicles with- ........out towing package) ..
  • Page 178 Driving RCTA (Rear Cross Traffic Alert) function .... RCD (Rear Camera Detec- tion) ......PKSB (Parking Support Brake)......Parking Support Brake func- tion (static objects front and rear of the vehicle) ..Parking Support Brake func- tion (moving vehicles rear of the vehicle)....
  • Page 179 4-1. Before driving Driving the vehicle If the parking brake is 4-1.Before driving released, set the parking brake. (P.212) The following procedures Change the shift position to should be observed to P. (P.207) ensure safe driving: Check that the shift position indica- tor shows P and the parking brake Driving procedure indicator is illuminated.
  • Page 180 P.91, 99 A warning message is displayed ● on the multi-information display while the system is operating. WARNING Breaking in your new Toyota ■ Observe the following precau- To extend the life of the vehicle, tions. observing the following precautions...
  • Page 181 4-1. Before driving During normal driving, do not WARNING ● turn off the engine. Turning the When driving the vehicle ■ engine off while driving will not cause loss of steering or brak- Do not drive if you are unfamil- ●...
  • Page 182 4-1. Before driving When changing the shift posi- WARNING ■ tion Do not drive across a river or ● Do not let the vehicle roll back- ● through other bodies of water. ward while a forward driving This may cause electric/elec- position is selected, or roll for- tronic components to short cir- ward while the shift position is in...
  • Page 183 Have the brake pads checked and Doing so may result in the fol- replaced by your Toyota dealer as lowing: soon as possible. • Gas may leak from a cigarette Rotor damage may result if the...
  • Page 184 4-1. Before driving If the brake booster device does WARNING ● not operate, do not follow other Always apply the parking brake, ● vehicles closely and avoid hills change the shift position to P, or sharp turns that require brak- stop the engine and lock the ing.
  • Page 185 4-1. Before driving Short in electrical components ● NOTICE Avoiding damage to vehicle Engine damage caused by ■ ● parts water immersion Do not turn the steering wheel ● In the event that you drive on a fully in either direction and hold flooded road and the vehicle is it there for an extended period flooded, be sure to have your Toy-...
  • Page 186: Cargo And Luggage

    4-1. Before driving Cargo and luggage When the system operates, a mes- sage appears on the multi-informa- tion display. Read the message and Take notice of the following follow the instruction. information about storage : Depending on the situation, the precautions, cargo capacity shift position may not be and load.
  • Page 187 (kg) get on, the available cargo (P.189) and luggage load will be reduced E lb. (kg) as follows: Vehicles without towing package: Toyota does not recommend towing C lb. (kg) - D lb. (kg) = E a trailer with your vehicle. Your (kg) vehicle is not designed for trailer towing.
  • Page 188 4-1. Before driving • On the dashboard WARNING Things that must not be car- Secure all items in the occupant ■ ● ried in the luggage compart- compartment. ment Capacity and distribution ■ The following things may cause a Do not exceed the maximum ●...
  • Page 189: Vehicle Load Limits

     TWR (Trailer Weight Rat- ing) (vehicles without towing package) Toyota does not recommend tow- ing a trailer with your vehicle.  Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occu- pants.
  • Page 190: Trailer Towing (Vehicles Without Towing Package)

    WARNING package) Overloading the vehicle ■ Do not overload the vehicle. Toyota does not recom- It may not only cause damage to mend towing a trailer with the tires, but also degrade steer- ing and braking ability, resulting in your vehicle. Toyota also an accident.
  • Page 191: Trailer Towing (Vehicles With Tow- Ing Package)

    4-1. Before driving Trailer towing (vehi- Toyota warranties do not cles with towing pack- apply to damage or mal- age) function caused by towing a trailer for commercial pur- poses. Your vehicle is designed pri- marily as a passen- Contact your Toyota dealer...
  • Page 192 [AWD models], rear differ- ential [AWD models] or wheel bear- ● All trailer lights work as required ing), Toyota recommends that you by law. do not tow a trailer until the vehicle ● All lights work each time you con- has been driven for over 500 miles nect them.
  • Page 193 4-1. Before driving After the trailer swaying has ● Adjust the tongue weight within ● stopped: the appropriate range. Place • Stop in a safe place. Get all occu- heavier loads as close to the pants out of the vehicle. trailer axle as possible.
  • Page 194 If the gross trailer weight ● exceeds unbraked TWR, trailer The maximum allowable gross brakes are required. Toyota rec- vehicle weight. The gross vehi- ommends trailers with brakes cle weight is the total weight of that conform to all applicable federal and state/provincial reg- the vehicle.
  • Page 195 4-1. Before driving ■ GAWR (Gross Axle Weight mended to use a trailer with 2 or more axles. Rating) The maximum allowable gross axle weight. The gross axle weight is the load placed on each axle (front and rear). With brakes ■...
  • Page 196 4-1. Before driving ■ Unbraked TWR Weight limits 1000 lb. (453 kg)  The gross trailer weight must : This models meet the tow-vehicle never exceed 5000 lb. (2265 trailering requirement of SAE kg). International per SAE J2807.  The gross combination weight must never exceed 10600 lb.
  • Page 197 When installing a trailer hitch ■ Toyota dealer. Use only the position recom- mended by your Toyota dealer.  If you wish to install a trailer Do not install the trailer hitch on the bumper; this may cause body hitch, contact your Toyota damage.
  • Page 198 4-1. Before driving Connecting trailer lights (if equipped) Use the wire harness stored in the rear end under body. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer cou- pler.
  • Page 199 Do not exceed the or prolonged turning. Have posted towing speed limit. someone guide you when  Toyota recommends that the reversing to reduce the risk of vehicle-trailer speed limit is 65 an accident. mph (104 km/h) on a flat, ...
  • Page 200 4-1. Before driving may skid, resulting in the quently when descending trailer jackknifing and a loss of steep or long downhill grades. vehicle control. This is espe- Before descending, slow cially true on wet or slippery down and downshift. Do not surfaces.
  • Page 201: Dinghy Towing

    4-1. Before driving When the wheel blocks are in Dinghy towing place, release the brakes slowly until the blocks absorb Your vehicle is not designed the load. to be dinghy towed (with 4 Shift into P and apply the wheels on the ground) parking brake.
  • Page 202 4-1. Before driving NOTICE AWD models: Never dinghy tow your vehicle to prevent causing serious damage to the Dynamic Torque Control AWD system and transmission.
  • Page 203: Driving Procedures Engine (Ignition) Switch

    Press the engine switch (P.72) shortly and firmly. Contact your Toyota dealer. ● If a message related to start-up is When operating the engine switch, shown on the multi-information one short, firm press is enough. It is...
  • Page 204 The system may be malfunctioning. than usual, such as the switch Have the vehicle inspected by your sticking slightly, there may be a Toyota dealer immediately. malfunction. Contact your Toyota dealer immediately. Electronic key battery ■ P.460 Stopping the engine Operation of the engine switch ■...
  • Page 205 4-2. Driving procedures shut off feature will reset if the To restart the engine after per- ● brake pedal is depressed, or if the forming an emergency shut- shift position is in a position other down, shift the shift lever to N than P.
  • Page 206 4-2. Driving procedures not pressed, the engine switch will automatically turn to OFF. However, this function cannot entirely prevent battery discharge. Do not leave the vehicle with the engine switch in ACC or ON for long periods of time when the engine is not running. When ACC customization is in ■...
  • Page 207: Automatic Transmission

    “Transmission Oil Temp High Stop in a Safe Place and See Owner's Manual” will be displayed on the multi-information display and the vehicle will go into transmission protection mode auto- matically. Have the vehicle inspected by your Toyota dealer.
  • Page 208 4-2. Driving procedures When driving with dynamic ■ Shifting the shift lever radar cruise control activated Even when performing the following actions with the intent of enabling engine braking, engine braking will not be activated because dynamic radar cruise control will not be can- celed.
  • Page 209 If the accelerator pedal is acci- shift lock system. Have the vehicle dentally depressed instead of the inspected by your Toyota dealer brake pedal when the shift lock immediately. override button is pressed and the...
  • Page 210 4-2. Driving procedures ing and enabling the level of ing situations: ● engine braking force to be When the vehicle comes to a stop ● selected. If the accelerator pedal is depressed for more than a certain period of time ●...
  • Page 211: Turn Signal Lever

    4-2. Driving procedures Turn signal lever switch is operated. The selected gear, from M1 to M8, will be fixed and displayed on the Operating instructions meters. When in the M position, the gear will not change unless the shift lever or a paddle shift switch is operated.
  • Page 212: Parking Brake

    4-2. Driving procedures Parking brake Check that a light bulb has not burned out. Otherwise, have the vehicle inspected by your Toyota dealer. The parking brake can be ■ set or released automati- If the turn signals stop flashing before a lane change has been cally or manually.
  • Page 213 4-2. Driving procedures The parking brake indicator will turn Operate the shift position with the vehicle stopped and the Pull and hold the parking brake brake pedal depressed. switch if an emergency occurs and The auto function may not operate it is necessary to operate the park- if the shift lever is moved extremely ing brake while driving.
  • Page 214 The parking brake may be tioning. Have the vehicle inspected released unintentionally by a child by your Toyota dealer. and there is the danger of the vehicle moving that may lead to Parking brake operation sound ■...
  • Page 215 4-2. Driving procedures When the parking brake can- WARNING ■ not be released due to a mal- Parking brake switch ■ function Do not set any objects near the Driving the vehicle with the park- parking brake switch. Objects ing brake set will lead to brake may interfere with the switch and components overheating, which may lead the parking brake to...
  • Page 216: Brake Hold

    4-2. Driving procedures ● Brake Hold “EPB Activation Stopped Incom- pletely” or “Parking Brake Mal- function Visit Your Dealer” is displayed on the multi-information The brake hold system display. keeps the brake applied If any of the conditions above are when the shift position is in detected when the brake hold sys- tem is enabled, the system will turn...
  • Page 217 When the vehicle is on a ■ operating conditions met, the sys- steep incline tem may be malfunctioning. Have the vehicle inspected at your Toyota Take care when using the brake dealer. hold system on a steep incline, exercise caution. The brake hold If “Brake Hold Malfunction...
  • Page 218: Operating The Lights And Wip- Ers Headlight Switch

    4-3. Operating the lights and wipers Headlight switch lights listed above (except 4-3.Operating the lights and wipers daytime running lights) turn The headlights can be oper- (U.S.A.) Off ated manually or automati- cally. ■ AUTO mode can be used when The engine switch is in ON.
  • Page 219 4-3. Operating the lights and wipers sor, or anything that blocks the the windshield wipers are used, the sensor is affixed to the windshield. headlights will turn on automatically Doing so interferes with the sensor after several seconds to help detecting the level of ambient light enhance the visibility of your vehi- and may cause the automatic head-...
  • Page 220: Ahb (Automatic High Beam)

    4-3. Operating the lights and wipers AHB (Automatic High Turning on the high beam Beam) headlights The Automatic High Beam uses a front camera located on the upper portion of the windshield to detect the brightness of the lights of vehicles ahead, street- lights, etc., and automati- cally changes the head...
  • Page 221 4-3. Operating the lights and wipers Turn the headlight switch to • When vehicles ahead are repeat- edly detected and then hidden position. due to repeated curves, road dividers or roadside trees When the headlight switch lever is • When a vehicle ahead in the low beam position, the AHB approaches from a far lane system will be enabled and the...
  • Page 222 4-3. Operating the lights and wipers roundings. This may cause the position quickly 10 times, then low beams to remain on or the leave the lever in its original posi- high beams to flash or dazzle tion. pedestrians or vehicles ahead. In If the sensitivity is changed, the such a case, it is necessary to Automatic High Beam indicator...
  • Page 223: Fog Light Switch

    4-3. Operating the lights and wipers Fog light switch Temporarily changing to the low beams : If equipped It is recommended to switch to The fog lights secure excel- the low beams when use of the lent visibility in difficult driv- high beams is inappropriate or ing conditions, such as in when the high beams may...
  • Page 224: Windshield Wipers And Washer

    4-3. Operating the lights and wipers operation Windshield wipers and washer (U.S.A.) or (Canada) Low speed operation Operating the lever can (U.S.A.) or (Canada) switch between automatic High speed operation operation and manual oper- ation, or can use the (U.S.A.) or (Canada) washer.
  • Page 225 4-3. Operating the lights and wipers after a short delay to prevent drip- the sensor sensitivity can be ping. However, the dripping preven- adjusted by turning the switch tion does not operate while the ring. vehicle is moving.) Rain-sensing windshield wip- ...
  • Page 226 4-3. Operating the lights and wipers The following operation can be per- position, the wipers will operate formed using the voice control sys- once to indicate that the sensor tem. sensitivity is enhanced. Operating the windshield wipers If the temperature of the raindrop ●...
  • Page 227 When a nozzle becomes ■ blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. To prevent battery discharge ■...
  • Page 228 4-3. Operating the lights and wipers NOTICE When lifting the windshield ■ wipers Do not lift the windshield wipers ● when they are in the retracted position below the hood. Other- wise, they may contact the hood, possibly resulting in dam- age to a windshield wiper and/or the hood.
  • Page 229: Rear Window Wiper And Washer

    4-3. Operating the lights and wipers Rear window wiper and washer NOTICE When the rear window is dry ■ Do not use the wiper, as it may damage the rear window. Operating the wiper lever Washer/wiper dual operation Operating the switch Pushing the lever operates the operates the rear wiper as fol-...
  • Page 230 When a nozzle becomes ■ blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. To prevent battery discharge ■...
  • Page 231: Refueling

    4-4. Refueling Opening the fuel tank 4-4.Refueling After exiting the vehicle and ● before opening the fuel door, touch an unpainted metal sur- face to discharge any static electricity. It is important to dis- Perform the following steps charge static electricity before to open the fuel tank cap: refueling because sparks result- ing from static electricity can...
  • Page 232 When replacing the fuel tank ■ Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
  • Page 233: 4-5. Using The Driving Support Systems

    Ver. 2. For the tem can be checked using One- latest information about the con- App. trols, use, warnings/precautions, etc. of each function of Toyota Selecting your vehicle’s Safety Sense 3.0, refer to the Toyota Safety Sense 3.0 Digital Owner’s Manual at the version Owner’s Manual website.
  • Page 234 ON. ● Toyota Safety Sense 3.0 can still be used while a software update is being performed. ■ What can be checked using the...
  • Page 235: Toyota Safety Sense

    ● performing driving operations or a system malfunction occurs, a warning message or warning buzzer will be operated. If a The Toyota Safety Sense 3.0 warning message is displayed consists of the driving on the display, follow the instructions displayed.
  • Page 236 PCS (Pre-Collision System) ■ P.243 P.245 : If equipped LTA (Lane Tracing Assist) ■ P.257 Sensors used by Toyota LDA (Lane Departure Alert) Safety Sense 3.0 ■ P.265 Various sensors are used to LCA (Lane Change Assist) obtain the necessary informa- ■...
  • Page 237 4-5. Using the driving support systems Sensors which detect the ■ Keep the radar sensors and ● surrounding conditions radar sensor covers clean at all times. Clean the front of a radar sensor or the front or back of a radar sen- sor cover if it is dirty or covered with water droplets, snow, etc.
  • Page 238 Do not modify or paint the radar ● sensors or radar sensor cover, or replace them with anything other than Toyota genuine parts. In the following situations, recal- ● ibration of the radar sensors will be necessary. For details, con- tact your Toyota dealer.
  • Page 239 In this case, have the vehicle inspected by your Toyota Do not disassemble the front ● dealer. camera. Do not disassemble or modify ●...
  • Page 240 4-5. Using the driving support systems • Truss bridges ■ Situations in which the sensors • Gravel roads may not operate properly • Rutted, snow-covered roads • Walls ● When the height or inclination of • Large trucks the vehicle has been changed due •...
  • Page 241 4-5. Using the driving support systems ● has become extremely short Immediately after changing lanes or passing through an intersection ● When a detectable vehicle is at an ● angle When driving in a temporary lane or lane regulated by construction ●...
  • Page 242 4-5. Using the driving support systems ● ● When the inside of the vehicle is When the driver is wearing hot, such as after the vehicle has makeup which makes it difficult to been parked in the sun detect their eyes, nose, mouth, or shape of their face ●...
  • Page 243: Driver Monitor

    4-5. Using the driving support systems ing, a buzzer will sound and a Driver monitor message will be displayed to warn the driver. : If equipped  When the system determines Basic functions that the driver is not paying attention to the road or their During controlled driving, the eyes are closed driver monitor camera detects...
  • Page 244 4-5. Using the driving support systems ■ Situations where face identifi- ● The driver monitor cannot cation may not be performed reduce drowsiness. If you feel correctly unable to concentrate or drowsy, take a break and sleep This system is designed for use to as necessary in order to ensure identify facial traits.
  • Page 245: Pcs (Pre-Collision System)

    4-5. Using the driving support systems PCS (Pre-Collision Sys- WARNING tem) For safe use ■ Driving safely is solely the ● responsibility of the driver. Pay The pre-collision system careful attention to the sur- uses sensors to detect rounding conditions in order to objects (P.245) in the path ensure safe driving.
  • Page 246 4-5. Using the driving support systems  Motorcycles  Walls : Detected as a detectable object only when being ridden. System functions ■ Pre-collision warning ■ Pre-collision brake assist When the system determines that the possibility of a collision If the system determines that is high, a buzzer will sound and the possibility of a collision is an icon and warning message...
  • Page 247 4-5. Using the driving support systems steering wheel Vehicles with active steering function: The brakes and steer- ing are controlled to help avoid a collision or reduce the impact of a collision, regardless of the evasive steering maneuvers performed by the driver. ...
  • Page 248 4-5. Using the driving support systems The pre-collision braking func- ● tion is not designed to hold the vehicle stopped. If the vehicle is stopped by pre-collision brake control, the driver should oper- ate the brakes immediately as necessary. The pre-collision braking func- ●...
  • Page 249 4-5. Using the driving support systems WARNING Depending on operations per- ● formed by the driver, emer- gency steering assist may not operate or operation may be canceled. • If the accelerator pedal is depressed strongly, the steering wheel is turned heavily, the brake pedal is depressed, or the turn signal lever is operated, the system may determine that the...
  • Page 250 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding vehicles, Approximately 3 to 110 Approximately 3 to 110 stopped vehicles mph (5 to 180 km/h) mph (5 to 180 km/h) Approximately 50 to Approximately 20 to 110 Oncoming vehicles 130 mph (80 to 220...
  • Page 251 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Approximately 3 to 50 Approximately 3 to 50 Bicycles mph (5 to 80 km/h) mph (5 to 80 km/h) Approximately 3 to 50 Approximately 3 to 50 Pedestrians mph (5 to 80 km/h)
  • Page 252 4-5. Using the driving support systems Relative speed Detectable Oncoming vehicle Vehicle speed between your objects speed vehicle and object Approximately 3 Approximately 3 Approximately 7 Oncoming vehi- to 25 mph (5 to to 45 mph (5 to to 70 mph (10 to cles 40 km/h) 75 km/h)
  • Page 253 4-5. Using the driving support systems The Acceleration Suppression at Low Speed function will not operate when the turn signal lights are flashing. Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding vehicles, stopped vehicles, Approximately 0 to 9 Approximately 0 to 9 Pedestrians, Bicycles, mph (0 to 15 km/h)
  • Page 254 4-5. Using the driving support systems • When a detectable object stops • When the steering wheel is oper- immediately before entering the ated toward the path of an oncom- path of the vehicle ing vehicle • When passing through a location •...
  • Page 255 4-5. Using the driving support systems able object • When a detectable object is white and looks extremely bright • When the color or brightness of a detectable object causes it to blend in with its surroundings • When a detectable object cuts in front of or suddenly emerges in front of your vehicle •...
  • Page 256 4-5. Using the driving support systems • When the road, etc. is reflected on emergency steering assist the wall (excluding the active steering • When the vehicle is approaching function) will not operate in the wall at an angle most cases. Changing the pre-colli- ...
  • Page 257: Lta (Lane Tracing Assist)

    4-5. Using the driving support systems LTA (Lane Tracing Assist) LTA functions  When driving on a road with clear lane lines with the dynamic radar cruise control operating, lane lines and pre- ceding and surrounding vehi- cles are detected using the front camera and radar sen- sor, and the steering wheel is operated to maintain the vehi-...
  • Page 258 4-5. Using the driving support systems the following conditions are met: The LTA system detects lane lines ● or the path of preceding or sur- rounding vehicles. The dynamic radar cruise control ● is operating. The lane width is approximately ●...
  • Page 259 4-5. Using the driving support systems sound to alert the driver. • When a steering wheel cover is installed ● If steering wheel operation equiv- • When the driver is wearing gloves alent to that necessary for a lane • When foreign matter is attached to change is detected, the system the steering wheel will determine the vehicle is not...
  • Page 260 4-5. Using the driving support systems When there are moving objects WARNING ● or structures in the surrounding Situations in which the func- ■ area (Depending on the position tions may not operate prop- of the moving object or structure erly relative to your vehicle, your vehicle may sway)
  • Page 261 4-5. Using the driving support systems Operation display of steering wheel operation support The operating state of the LTA system is indicated. Lane dis- Steering Indicator Situation play icon LTA is on standby White Grey/White Grey LTA is operating Green Green Green The vehicle is departing the lane...
  • Page 262: Lca (Lane Change Assist)

    4-5. Using the driving support systems LCA (Lane Change WARNING Assist) Before using the LCA system ■ Do not overly rely on the LCA ● : If equipped system. The LCA system is not a system which provides automated assis- LCA functions tance in driving and it is not a sys- tem which reduces the need for...
  • Page 263 4-5. Using the driving support systems ing. ■ Cancelation of functions In the following situations, opera- tion of the LCA may be canceled with the display and buzzer: ● When the operating conditions (P.262) are no longer met ● When the system can no longer ■...
  • Page 264 4-5. Using the driving support systems First position: LCA is opera- To change lanes by holding the turn signal lever in the first position with- tional out using the LCA, turn the custom- Second position: LCA is not ize setting of the LCA off. operational WARNING Situations in which the LCA...
  • Page 265: Lda (Lane Departure Alert)

    4-5. Using the driving support systems LDA (Lane Departure Alert) Basic functions The LDA system warns the driver if the vehicle may deviate from the current lane or course and also can slightly operate the steering wheel to help avoid deviation from the lane or course The front camera is used to...
  • Page 266 4-5. Using the driving support systems and grass, soil, etc., or structures, WARNING such as a curb, guardrail, etc. Before using the LDA system ■ Do not overly rely on the LDA ● system. The LDA system is not a system which provides auto- mated assistance in driving.
  • Page 267 4-5. Using the driving support systems in the direction that the turn signal collision with a vehicle in an adja- cent lane. lever is operated.) ● • The vehicle is not being driven Vehicles with a driver monitor around a sharp curve. camera: Depending on the driver •...
  • Page 268 Contact your Toyota dealer for of the steering assist operating details. increases. Even if the system judges that the steering wheel has...
  • Page 269 4-5. Using the driving support systems WARNING When it is necessary to disable ● the system: P.235 Displays and system operation The operating state of the lane departure alert function and steering assist operation of the lane departure prevention function are indi- cated.
  • Page 270 4-5. Using the driving support systems For Puerto Rico  Lane dis- Steering Indicator Situation play icon Not illumi- Not illumi- System disabled nated nated Yellow Illuminated Not illumi- Not illumi- Lane lines are not detected by the nated nated system Grey Not illumi-...
  • Page 271: Pda (Proactive Driving Assist)

    4-5. Using the driving support systems PDA (Proactive driv- Proactive driving assist is not a ● system which allows for inatten- ing assist) tive driving and is not a system which assists in poor visibility conditions. The driver is solely When a detectable object responsible for paying attention (P.272) is detected, the...
  • Page 272 4-5. Using the driving support systems System operating conditions and detectable objects According to the driving conditions, the operation and detectable objects of the proactive driving assist will change as follows. Detectable Function Conditions Operation objects Assistance with some brake opera- A detectable ...
  • Page 273 4-5. Using the driving support systems Detectable Function Conditions Operation objects A preceding vehi- The vehicle is gently  Preceding vehi- cle or an adjacent decelerated so that vehicle cutting in the vehicle-to-vehi- cles  Motorcycles front of the vehicle cle distance will not is detected be excessively short.
  • Page 274 4-5. Using the driving support systems (For example: PCS, drive-start con- When driving on snowy, icy, or ● trol) rutted roads • When the system determines that When a detectable object is ● a detected object has moved approaching your vehicle away from the vehicle •...
  • Page 275 4-5. Using the driving support systems When the vehicle has not been WARNING ● driven for a certain amount of When a bicycle is a child sized ● time after the engine was bicycle, is carrying a large load, started is carrying an extra passenger, or has an unusual shape (bicy- While turning left or right or a...
  • Page 276 4-5. Using the driving support systems Icon Meaning  White: Monitoring for detectable objects  Green: Detectable object crossing the road or detectable object on the side of the road assistance operating A pedestrian has been detected as crossing the road or on the side of the road and brake or steering assistance is operating A vehicle has been detected on the side of the road and...
  • Page 277: Fcta (Front Cross Traffic Alert)

    4-5. Using the driving support systems FCTA (Front Cross This warning may also operate if the driver only operates steering wheel Traffic Alert) a small amount continuously. ■ Warning operation after preced- : If equipped ing vehicle deceleration assis- When approaching an inter- tance has ended section, etc., at a low speed, After preceding vehicle decelera-...
  • Page 278 4-5. Using the driving support systems • Multi-information display at a speed between approximately 7 to 37 mph (10 to 60 km/h) There are no vehicles in front of ● your vehicle The accelerator pedal is not being ● strongly depressed The brake pedal is not being ●...
  • Page 279 4-5. Using the driving support systems ● vehicle approaches from the left When several vehicles are or right in front of your vehicle approaching with little space between them ● When making a left/right turn in ● front of an approaching vehicle Situations in which the sensors may not operate properly: P.240 ●...
  • Page 280: Rsa (Road Sign Assist)

    4-5. Using the driving support systems detects a sign or information RSA (Road Sign of a sign is available from the Assist) navigation system, the sign will be displayed on the dis- : If equipped play. The RSA system detects ...
  • Page 281 4-5. Using the driving support systems ● When a sign is immediately after a ■ Operating conditions of the freeway junction or in an adjacent notification functions lane just before merging ● ● Excess speed notification function When stickers are attached to the rear of a preceding vehicle This function will operate when the ●...
  • Page 282: Dynamic Radar Cruise Control

    4-5. Using the driving support systems Dynamic radar cruise control Stop This dynamic radar cruise control detects the pres- Yield ence of vehicles ahead, determines the current vehi- cle-to-vehicle distance, and Warning operates to maintain a suit- able distance from the vehi- ...
  • Page 283 4-5. Using the driving support systems Details of support provided for WARNING ● the driver’s judgement Set the speed appropriately ● The dynamic radar cruise control according to the speed limit, determines whether the distance traffic flow, road conditions, between the driver’s own vehicle weather conditions, etc.
  • Page 284 4-5. Using the driving support systems Basic functions Constant speed cruising: When there are no vehicles ahead The vehicle drives at the speed set by the driver. If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display will blink and a buzzer will sound.
  • Page 285 4-5. Using the driving support systems If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the preceding vehicle starts off, pressing the “RES” switch or depressing the accelerator pedal will resume follow-up cruising (start off operation). If a start off operation is not performed, the controlled stop will continue.
  • Page 286 4-5. Using the driving support systems (approximately 20 mph [30 Long press adjustment: Press and hold the switch until the desired set km/h] or more), and press the vehicle speed is reached. driving assist switch to set The set vehicle speed will the set vehicle speed.
  • Page 287 4-5. Using the driving support systems Press the “RES” switch to depending on the situation, regard- less of the setting. resume control. ■ Operating conditions Changing the vehi- ● The desired set speed can be set cle-to-vehicle distance when the vehicle speed is approx- imately 20 mph (30 km/h) or more.
  • Page 288 4-5. Using the driving support systems ● ● When the brake control or output When a motorcycle is traveling in restriction control of a driving sup- the same lane as the vehicle port system operates ■ Conditions under which the (For example: Pre-Collision Sys- system may not operate cor- tem, drive-start control)
  • Page 289 4-5. Using the driving support systems if a vehicle cuts in front of the will be canceled. vehicle, a warning display will flash and a buzzer will sound to alert the driver. Depress the brake pedal to ensure appropri- ate vehicle-to-vehicle distance. ■...
  • Page 290 4-5. Using the driving support systems when the turn signal lever is operated and the lane is changed, the vehicle will accel- erate up to the set speed to assist in overtaking. The system’s recognition of which lane is the passing lane may be based solely on the location of the steering wheel in the vehicle (left-hand drive/right-hand drive).
  • Page 291 4-5. Using the driving support systems Display and system operation state The operating state of Dynamic radar cruise control is indicated. Indicator Multi-information display Situation Vehi- Dynamic cle-to-vehi- radar cruise cle distance control being White setting: Grey Vehi- cle-to-vehi- cle distance Constant setting: Blue speed cruis-...
  • Page 292 4-5. Using the driving support systems Indicator Multi-information display Situation Vehi- cle-to-vehi- cle distance setting: Orange flashing Approach Set vehicle warning Green speed: Green Preceding vehicle: Yel- low flashing Vehi- cle-to-vehi- cle distance setting: Grey Accelerat- Set vehicle ing with the speed: accelerator Green...
  • Page 293 4-5. Using the driving support systems Indicator Multi-information display Situation Set vehicle speed: Set vehicle Green in speed being reverse dis- exceeded Green play Vehi- cle-to-vehi- cle distance setting: Grey Vehicle in Set vehicle controlled speed: stop Green White Preceding vehicle: Grey...
  • Page 294: Cruise Control

    4-5. Using the driving support systems Cruise control On steep downhills, or where ● there are sudden changes between sharp up and down The vehicle can be driven at gradients a set speed even if the Vehicle speed may exceed the set speed when driving down a steep accelerator pedal is not hill.
  • Page 295 4-5. Using the driving support systems Cancel switch Adjusting the set vehicle speed Using the cruise control  Adjusting the set vehicle speed using the switches Setting the vehicle speed To change the set vehicle speed, press the “+” switch or “-” Press the driving assist mode switch until the desired speed is select switch to select cruise...
  • Page 296 4-5. Using the driving support systems Canceling/resuming con- trol Press the cancel switch or driving assist switch to cancel control. Control will also be canceled if the brake pedal is depressed. Press the “RES” switch to resume control. ■ Automatic cancellation of the cruise control In the following situations, the cruise control will be canceled automati-...
  • Page 297 4-5. Using the driving support systems Display and system operation state The operating state of cruise control is indicated. Indicator Multi-information display Situation Cruise con- Blank trol being White Set vehicle Constant speed: speed cruis- Green Green Set vehicle speed: Set vehicle Green in speed being...
  • Page 298: Emergency Driving Stop System

    4-5. Using the driving support systems Emergency Driving WARNING Stop System For safe use ■ Driving safely is solely the ● : If equipped responsibility of the driver. Pay careful attention to the sur- The emergency driving stop rounding conditions in order to system is a system which ensure safe driving.
  • Page 299 4-5. Using the driving support systems approximately 30 mph (50 km/h) WARNING or more This system detects the condi- ● During the Traffic Jam Assist (if tion of the driver through the equipped) controls, the system may operation of the steering wheel. operate at below 30 mph (50 km/h).
  • Page 300 4-5. Using the driving support systems steering wheel, are not per- erate and stop. After the vehicle formed within a certain amount stops, the system will enter the of time, the system will enter stop and hold phase. warning phase 2. Stop hold phase Vehicles with a driver monitor camera: Depending on the type...
  • Page 301: Traffic Jam Assist

    4-5. Using the driving support systems Traffic Jam Assist Emergency Driving Stop System : If equipped P.298 Function Outline Extended resume time of Traffic Jam Assist is a system Dynamic radar cruise which, through confirmation of control the conditions by the driver, pro- P.282 vides lane keeping, accelerat- ing/decelerating, stopping, and...
  • Page 302 4-5. Using the driving support systems Driver monitor camera Depending on the condition of ● the surrounding area, the road, recording or the driver, the Traffic Jam Assist function may not operate When the operation of Traffic or operation may be sus- pended.
  • Page 303 4-5. Using the driving support systems Situations in which the sensors WARNING ● may not operate properly In certain situations, a message ●  P.240 urging the driver to hold the steering wheel may be dis- Situations in which the lane may ●...
  • Page 304 4-5. Using the driving support systems Functions and components com- ● WARNING posing the system are in proper condition. To prevent malfunction of the ■ radar sensors Customized setting of the PCS ● (Pre-Collision System) is not set P.237 to off. To prevent malfunction of the ■...
  • Page 305 4-5. Using the driving support systems wheel can be operated. If the steer- assist function has operated. ing wheel is operated more than a certain amount, controlled driving Changing Traffic Jam will be cancelled. Assist settings ■ When a warning message is displayed ...
  • Page 306 4-5. Using the driving support systems Display Status Action to be taken The driver must operate Indicates that driving the steering wheel, accel- actions are necessary to erator pedal and brake cope with cut-in or other pedal in accordance with behavior of surrounding (Yellow) the surrounding environ-...
  • Page 307: Stop & Start System

    4-5. Using the driving support systems ■ Stop & Start system When the brake hold sys- tem is operating  When the engine is stopped The Stop & Start system by the Stop & Start system, if stops and starts the engine the brake pedal is released according to brake pedal or the engine will remain...
  • Page 308 ● Installation and removal of electri- cal components and wireless devices may affect the Stop & Hill-start assist control Start system. Contact your Toyota dealer for details. When the engine is stopped by ● When stopping the vehicle for a the Stop &...
  • Page 309 4-5. Using the driving support systems conditions are met: been replaced • The vehicle has been driven a cer- ● When the engine is stopped by tain amount of time. the Stop & Start system, the • The brake pedal is being engine will be restarted automati- depressed firmly.
  • Page 310 • If displayed continuously for a length of time the Stop & Start sys- long time (more than an hour) tem will operate when the air condi-  The battery may be deteriorated. tioning system is off cannot be Contact your Toyota dealer for changed.)
  • Page 311 4-5. Using the driving support systems details. being used. • The windshield defogger has “Stop & Start System Unavail- been turned on. able” “Battery Charging” • The Stop & Start system is tempo- rarily disabled. • The battery charge may be low. ...
  • Page 312 4-5. Using the driving support systems Toyota dealer. Even though the driver’s seat ● belt is not fastened, the driver’s If “Stop & Start System Mal- ■ and front passenger’s seat belt function Visit Your Dealer” is reminder light does not illumi- displayed on the multi-informa- nate.
  • Page 313: Bsm (Blind Spot Monitor)

    4-5. Using the driving support systems BSM (Blind Spot Moni- System components tor) The Blind Spot Monitor is a system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when changing lanes.
  • Page 314 If a sensor or the rear bumper ● needs to be removed/installed tions of the BSM function or replaced, contact your Toyota (P.316) satisfied for approxi- dealer. mately 10 minutes. If the warning message does not disappear, The sensors are likely to be ●...
  • Page 315 4-5. Using the driving support systems indicator (P.78) will illuminate Each time the engine switch is and a message will be displayed turned to ON, the Blind Spot on the multi-information display. Monitor is enabled. Blind Spot Monitor operation ■ Objects that can be detected while driving The Blind Spot Monitor uses rear side radar sensors to detect the fol- lowing vehicles traveling in adjacent lanes and advises the driver of...
  • Page 316 4-5. Using the driving support systems Approximately 3.3 ft. (1 m) forward of the rear bumper Approximately 9.8 ft. (3 m) from the rear bumper Approximately 9.8 ft. (3 m) to 230 ft. (70 m) from the rear bumper : The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehicle cannot be detected.
  • Page 317 4-5. Using the driving support systems ● When a second vehicle is cent lane is far away from your detected while the turn signal vehicle lever is being held • When an accessory (such as a bicycle carrier) is installed to the ●...
  • Page 318: Safe Exit Assist

    4-5. Using the driving support systems Safe Exit Assist System components The safe exit assist is a sys- tem that uses rear side radar sensors installed on the inner side of the rear bumper to help occupants judge if an approaching vehicle or bicycle may col- lide with a door when exit- ing, to help reduce the...
  • Page 319 4-5. Using the driving support systems that the system has operated. After tomize setting on the Multimedia Display and the engine has been the notification through voice guid- stopped ance is made, no more voice guid- When the parking assist volume ●...
  • Page 320 4-5. Using the driving support systems tor, buzzer, multi-information display, and voice notification. Vehicle or bicycle which has a high possibility of colliding with a door (other than the back door) when opened ■ The safe exit assist detection areas The areas that vehicles can be detected in are outlined below.
  • Page 321 4-5. Using the driving support systems door) approaches from behind a nearby parked vehicle ■ Conditions under which the • When an approaching vehicle or system will not detect a vehicle bicycle suddenly changes direc- ● Safe exit assist does not detect tion the following objects, vehicles, •...
  • Page 322: Intuitive Parking Assist

    4-5. Using the driving support systems Intuitive parking other accessory is installed to the back of the vehicle assist • When a vehicle or bicycle is approaching at high speed • When towing with the vehicle : If equipped • When stopped on a steep slope •...
  • Page 323 4-5. Using the driving support systems detecting a stationary object, the turned to ON again after the intuitive parking assist detection engine switch has been turned indicator illuminates. (P.78) off.) Multimedia Display: Vehicles without the Multimedia Display or rear camera: How- ever, the system will automati- cally turn on (enabled) and the intuitive parking assist OFF indi-...
  • Page 324 If subjected to an impact, have the vehicle Sensor detection information ■ inspected by your Toyota The sensor’s detection areas are ● dealer. If the front or rear limited to the areas around the bumper needs to be vehicle’s front and rear bumpers.
  • Page 325 4-5. Using the driving support systems are wearing certain types of cloth- dicular to the vehicle traveling ing. direction, uneven, or waving are in the detection range. ■ Situations in which the system ● When strong winds are blowing may not operate properly ●...
  • Page 326 4-5. Using the driving support systems ● ● When driving toward a banner, If the vehicle cannot be driven in a flag, low-hanging branch or boom stable manner, such as when the barrier (such as those used at rail- vehicle has been in an accident or road crossings, toll gates and is malfunctioning parking lots)
  • Page 327 4-5. Using the driving support systems The diagram shows the detection the vehicle. range of the sensors. The range of the sensors may Note that the sensors cannot detect change depending on the shape of objects that are extremely close to the object, etc.
  • Page 328: Rcta (Rear Cross Traffic Alert) Function

    4-5. Using the driving support systems Mute will be automatically can- ● RCTA (Rear Cross Traf- celed in the following situations: fic Alert) function • When the shift position is changed. • When the vehicle speed exceeds The RCTA function uses the a certain speed.
  • Page 329 4-5. Using the driving support systems illustration. System components Driving assist information indicator Illuminates when the RCTA is turned off. At this time, a message will be displayed on the multi-infor- mation display. Turning the RCTA func- tion on/off Meter control switches The RCTA can be enabled/dis- Operate the meter control switches abled through a customize set-...
  • Page 330 When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the Multimedia Display.  Example (Toyota parking assist monitor): Vehicles are approaching from both sides ■ RCTA function detection areas The areas that vehicles can be detected in are outlined below.
  • Page 331 4-5. Using the driving support systems sensor or the system is temporar- Approaching Approximate ily unavailable. vehicle speed alert distance ● When the operating function is disabled manually. 34 mph (56 98 ft. (30 m) ● When the engine switch is turned km/h) (fast) off.
  • Page 332 4-5. Using the driving support systems situations: ● When the sensor is misaligned due to a strong impact to the sen- sor or its surrounding area ● When mud, snow, ice, a sticker, etc., is covering the sensor or sur- rounding area on the position above the rear bumper ●...
  • Page 333 4-5. Using the driving support systems ■ Situations in which the system while approaching the vehicle may operate even if there is no possibility of a collision Instances of the RCTA function unnecessary detecting a vehicle and/or object may increase in the following situations: ●...
  • Page 334: Rcd (Rear Camera Detection)

    If the vicin- Detection) ity is subjected to a strong impact, have the vehicle : If equipped inspected by your Toyota dealer. When the vehicle is back- Do not disassemble, remodel or ing up, the rear camera ●...
  • Page 335 4-5. Using the driving support systems from behind, the system urges RCD display caution from the driver by sounding the buzzer and dis- playing the detection of a pedes- trian on the Multimedia Display as follows: Pedestrian detection icon Displayed automatically when a pedestrian is detected behind the vehicle.
  • Page 336 4-5. Using the driving support systems Pedestrian detection icon: • Pedestrians who are riding mov- ing objects such as a bicycle or Blinks skateboard • Pedestrians wearing oversized ■ clothing such as a rain coat, long The rear camera detection func- skirt, etc., making their silhouette tion is operational when obscure...
  • Page 337 4-5. Using the driving support systems the rear bumper rear of the vehicle • When towing with the vehicle • When water is flowing over the rear camera lens ■ Situations in which the system • The lens is dirty (by dirt or may operate unexpectedly snow-melting agent, etc.) ●...
  • Page 338: Pksb (Parking Support Brake)

    4-5. Using the driving support systems PKSB (Parking Sup- WARNING port Brake) Cautions regarding the use of ■ the system : If equipped Do not overly rely on the system, as doing so may lead to an acci- The PKSB (Parking Support dent.
  • Page 339 4-5. Using the driving support systems Precautions for the suspen- WARNING ■ sion When inspecting the vehicle ● Do not modify the suspension of using a chassis roller, chassis the vehicle. If the height or tilt of dynamo or free roller the vehicle is changed, the sen- sors may not be able to detect When loading the vehicle onto a...
  • Page 340 Multimedia Multimedia Display (vehicles with a Display and multi-information dis- panoramic view monitor or Toyota play, to alert the driver. parking assist monitor with RCD Depending on the situation, output [Rear Camera Detection]): A dis-...
  • Page 341 4-5. Using the driving support systems Additionally, if the accelerator determines that possibility of pedal continues to be collision with detected object depressed, the brakes will be is high) applied automatically to reduce  Figure 3: When engine out- the vehicle speed. (Brake con- put restriction control and trol: See figure 3.) brake control operates...
  • Page 342: Parking Support Brake Func- Tion (Static Objects Front And Rear Of The Vehicle)

    4-5. Using the driving support systems Parking Support Brake can be canceled by depressing the brake pedal. Depressing the accel- function (static erator pedal again after that allows objects front and rear the vehicle to start off. of the vehicle) ■...
  • Page 343 4-5. Using the driving support systems  When the accelerator pedal is Types of sensors depressed excessively P.322 WARNING To ensure the system can ■ operate properly P.323 If the Parking Support Brake ■ function operates unneces- sarily, such as at a railroad crossing P.340 Notes when washing the vehi-...
  • Page 344 4-5. Using the driving support systems • There is a static object in the trav- objects front and rear of the vehicle) eling direction of the vehicle and differs from the detection range of approximately 6 to 13 ft. (2 to 4 m) the intuitive parking assist (P.326).
  • Page 345: Vehicle

    4-5. Using the driving support systems Parking Support Brake Types of sensors function (moving vehi- P.314 cles rear of the vehi- cle) WARNING To ensure the system can ■ : If equipped operate properly If a rear radar sensor P.314 detects a vehicle approach- ing from the right or left at The Parking Support Brake...
  • Page 346: Parking Support Brake Function (Pedestrians Rear Of The Vehicle)

    4-5. Using the driving support systems Parking Support Brake • The Parking Support Brake is dis- abled. function (pedestrians • The collision becomes avoidable rear of the vehicle) with normal brake operation. • A vehicle is no longer approaching from the right or left at the rear of : If equipped the vehicle.
  • Page 347 4-5. Using the driving support systems of the following conditions are met: Screen display of pedes- Engine output restriction control ● trians rear of the vehicle • The Parking Support Brake is enabled. Displays a message to urge the • The vehicle speed is 9 mph (15 km/h) or less.
  • Page 348: Driving Mode Select Switch

    4-5. Using the driving support systems ■ Driving mode select Detection area of the Parking Support Brake function (pedes- switch trians rear of the vehicle) The detection area of the Parking Support Brake function (pedestrians The driving modes can be rear of the vehicle) differs from the selected to suit the driving detection area of the RCD function...
  • Page 349: Multi-Terrain Select

    4-5. Using the driving support systems Multi-terrain Select response is desired, such as when driving on roads with many curves. (AWD models) When Sport mode is selected, Sport mode indicator comes on. Multi-terrain Select is Eco drive mode designed to control AWD, Helps the driver accelerate in an brake and driving force sys- eco-friendly manner and improve...
  • Page 350 4-5. Using the driving support systems Rock & Dirt mode indicator illumi- nates.  Normal mode The indicators and/or warning lights above turn off. ■ Multi-terrain Select ● Multi-terrain Select is intended for use when driving on rough roads. Switches to Mud & Sand Drive in Normal mode during nor- mal driving.
  • Page 351 ■ mode does not illuminate The system may be malfunctioning if the indicator does not illuminate when selecting the mode other than Normal mode. Have the vehicle inspected by your Toyota dealer immediately. WARNING Before using Multi-terrain ■ Select Make sure to observe the follow- ing precautions.
  • Page 352: Snow Mode Switch

    4-5. Using the driving support systems Snow mode switch Downhill assist con- trol system (AWD vehi- cles) Snow mode can be selected to suit the conditions when driving on slippery road sur- The downhill assist control faces, such as on snow. system helps to prevent excessive speed on steep downhill slopes.
  • Page 353 • The vehicle speed exceeds approximately 15 mph (25 km/h). In the following cases, have your • The brake system overheats. vehicle checked by your Toyota dealer. In the following situation, the indi- ● cator flashes to alert the driver, The downhill assist control system ●...
  • Page 354: Driving Assist Systems

    4-5. Using the driving support systems Driving assist systems WARNING Situations in which the sys- ■ tem may not operate properly To keep driving safety and The system may not operate on performance, the following the following surfaces, which may systems operate automati- lead to an accident causing death cally in response to various...
  • Page 355 4-5. Using the driving support systems ■ Enhanced VSC (Enhanced wheel Vehicle Stability Control) ■ Dynamic Torque Control Provides cooperative control of AWD system (AWD models) the ABS, TRAC, VSC and EPS. Automatically controls the drive Helps to maintain directional system such as to front-wheel stability when swerving on slip- drive or AWD (all wheel drive)
  • Page 356 To turn the TRAC system off, quickly TRAC is temporary deactivated. If press and release the switch. the information continues to show, contact your Toyota dealer. The “Traction Control Turned OFF” ■ Operating conditions of will be shown on the multi-informa- hill-start assist control tion display.
  • Page 357 If the message disappears after a ● If only the TRAC system is turned while, there is no problem. If the off, the TRAC will turn on when message remains, have the vehicle vehicle speed increases inspected by your Toyota dealer...
  • Page 358 TRAC/VSC system is operating. cally recover. If the message Drive the vehicle carefully in con- remains, have the vehicle inspected ditions where stability and power by your Toyota dealer immediately. may be lost. “AWD System Malfunction 2WD ● Mode Engaged Visit Your Dealer”...
  • Page 359 Collision Brake. This sys- are installed on the vehicle. tem is designed to help reduce Contact your Toyota dealer for fur- the possibility of further damage ther information when replacing due to a secondary collision, how- tires or wheels.
  • Page 360: 4-6. Driving Tips

    Repairing or replacing snow ■ tires WARNING Request repairs or replacement of Driving with snow tires snow tires from Toyota dealers or ■ legitimate tire retailers. Observe the following precautions This is because the removal and to reduce the risk of accidents.
  • Page 361 4-6. Driving tips parking brake off. Otherwise, Before driving the vehicle the parking brake may freeze Perform the following according and not be able to be to the driving conditions: released automatically.  Do not try to forcibly open a Also, avoid using the following as the parking brake may operate window or move a wiper that...
  • Page 362 4-6. Driving tips before installing chains. Selecting tire chains (vehicles with 18-inch Tire chain installation (vehicles ■ tires) with 18-inch tires) Observe the following precautions Use the correct tire chain size when installing and removing when mounting the tire chains. chains: Chain size is regulated for each Install and remove tire chains in a...
  • Page 363: Utility Vehicle Precautions

    4-6. Driving tips Utility vehicle precau- WARNING tions Utility vehicle precautions ■ Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death, serious injury or damage to utility vehicle class, which your vehicle: has higher ground clear- In a rollover crash, an unbelted ●...
  • Page 364 4-6. Driving tips State Motor Vehicle Bureau ● Off-road driving Recreational Vehicle Clubs ● FF models: Your vehicle is not U.S. Forest Service and Bureau of ● Land Management designed to be driven off-road. However, in the event that WARNING off-road driving cannot be Off-road driving precautions avoided, please observe the fol-...
  • Page 365 4-6. Driving tips Always perform a maintenance ● NOTICE inspection after each day of To prevent water damage ■ off-road driving that has taken you through rough terrain, sand, Take all necessary safety mea- mud, or water. For scheduled sures to ensure that water dam- maintenance information, refer age to the engine or other to the “Scheduled Maintenance...
  • Page 366 4-6. Driving tips...
  • Page 367: Interior Features

    Interior features 5-1. Using the air conditioning system and defogger Front automatic air condi- tioning system ... Rear automatic air condi- tioning system ... Heated steering wheel/seat heaters/seat ventilators ........5-2. Using the interior lights Interior lights list ..5-3. Using the storage features List of storage features ........
  • Page 368: System

    5-1. Using the air conditioning system and defogger Front automatic air conditioning system 5-1.Using the air conditioning system and defogger Air outlets and fan speed are automatically adjusted accord- ing to the temperature setting. The air conditioning system can be displayed and operated on the Multimedia Display.
  • Page 369 5-1. Using the air conditioning system and defogger ■ Adjusting the temperature the fan. setting ■ Change the airflow mode Turn driver’s side temperature To change the airflow mode, control switch clockwise to move the airflow mode control increases the temperature and knob upward or downward.
  • Page 370 5-1. Using the air conditioning system and defogger ■ Set cooling and dehumidifi- gers switch is on, the indicator illu- minates on the rear window cation function defogger and outside rear view mir- Press the “A/C” switch. ror defoggers switch. When the function is on, the indica- The defoggers will automatically tor illuminates on the “A/C”...
  • Page 371 5-1. Using the air conditioning system and defogger recirculated air mode is used. enter into and accumulate in the air conditioning system. This may ■ When driving on dusty roads then cause odor to be emitted Close all windows. If dust thrown up from the vents.
  • Page 372 Requires registered system technician to service Have repair/replacement per- air conditioning sys- formed by your Toyota dealer. When a part of the air conditioning system, such as the evaporator, is to be replaced, it must be Flammable refrigerant replaced with a new one.
  • Page 373 5-1. Using the air conditioning system and defogger Adjust the fan speed setting Front air conditioning control screen (Multime- ■ Option screen dia Display) Touch on the main menu. ■ Main screen Select “Climate”. Select “Options”. Touch on the main menu. Select “Climate”.
  • Page 374 5-1. Using the air conditioning system and defogger ■ Eco air conditioning mode To stop the operation, press the “OFF” switch. When Eco drive mode is selected using the driving mode select If the fan speed setting or air switch, eco air conditioning mode turns on.
  • Page 375 5-1. Using the air conditioning system and defogger ■ ■ Manually turning front seat To return to automatic airflow control concentrated airflow mode With the indicator off, turn the on/off engine switch off. After 60 minutes or more elapse, In front seat concentrated air- turn the engine switch to ON.
  • Page 376 5-1. Using the air conditioning system and defogger Front side outlets  Direct air flow to the left or right, up or down Open the vent Close the vent WARNING To not interrupt the wind- ■ shield defogger from operat- Do not place anything on the instrument panel which may cover the air outlets.
  • Page 377: Rear Automatic Air Conditioning System

    5-1. Using the air conditioning system and defogger Rear automatic air conditioning system The air outlets and fan speed are automatically adjusted according to the temperature setting. The rear air conditioning system can be operated using the front air conditioning control panel and rear air conditioning control panel.
  • Page 378 5-1. Using the air conditioning system and defogger ■ Front air conditioning control panel Rear air conditioning system on/off switch “REAR CLIMATE” switch The mode switches between the rear air conditioning control mode and front air conditioning control mode each time the “REAR CLIMATE” switch is pressed.
  • Page 379 5-1. Using the air conditioning system and defogger Select “Climate”. Select “Rear”. Adjust the rear seats tem- perature setting Upper body Air flow mode control switch Upper body and feet Feet Adjust the rear seats fan speed setting ■ Front air conditioning con- trol panel “REAR OFF”...
  • Page 380 5-1. Using the air conditioning system and defogger Rear air conditioning con- ■ Air outlets trol screen Location of air outlets ■ To change the airflow mode, select the airflow mode control The air outlets and air volume switch. changes according to the selected air flow mode.
  • Page 381: Heated Steering Wheel/Seat Heaters/Seat Ventilators

    5-1. Using the air conditioning system and defogger Heated steering To prevent battery discharge ■ wheel /seat heat- Do not use the functions when the engine is off. ers/seat ventilators Heated steering wheel : If equipped  Heated steering wheel Turns the heated steering wheel Warms up the grip of the on/off...
  • Page 382 5-1. Using the air conditioning system and defogger Do not use seat heater more ● than necessary. Seat ventilators Front seats (If equipped) ■ Each time the switch is pressed, the operation condition changes as follows. Second seats (If equipped) ■...
  • Page 383 5-1. Using the air conditioning system and defogger ■ Operation condition The engine switch is in ON.
  • Page 384: 5-2. Using The Interior Lights

    5-2. Using the interior lights Interior lights list 5-2.Using the interior lights Location of the interior lights Front personal lights (P.385) Front interior lights (P.384) Center console light Open tray lights (if equipped) Door courtesy lights Rear personal lights (P.385) Footwell lights Outer foot lights (if equipped) Ambient lights (if equipped)
  • Page 385 5-2. Using the interior lights ■ Rear personal lights Turns the lights on/off ■ Turning the door position Press the door-linked interior ■ Illuminated entry system light switch The lights automatically turn on/off The lights are turned on and off according to the engine switch according to whether the doors are mode, the presence of the elec-...
  • Page 386 5-2. Using the interior lights NOTICE To prevent battery discharge ■ Do not leave the lights on longer than necessary when the engine is not running.
  • Page 387: Using The Storage Features

    5-3. Using the storage features List of storage features 5-3.Using the storage features Location of the storage features Bottle holders (P.390) Cup holders (P.389) Open tray (P.391) Console box (P.388) Auxiliary boxes (P.390) Glove box (P.388) Lighters or spray cans may WARNING ●...
  • Page 388 5-3. Using the storage features WARNING When storage compartments ■ are not in use When driving or when the storage compartments are not in use, keep the lids closed. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by an open lid or the items stored inside.
  • Page 389 5-3. Using the storage features • Type B Cup holders Front seats  Third seats  Second seats (8-seat models)  Pull the armrest down. ■ When the cup holders are not in Type B cup holder unit of the sec- ond seats (7-seat models) can be Second seats (7-seat models) ...
  • Page 390 5-3. Using the storage features Second seats  Third seats  WARNING Items unsuitable for the cup ■ holder Do not place anything other than cups, aluminum cans, or water bottles in the cup holders. Other items may be thrown out of the holders in the event of an acci- dent or sudden braking, possibly Bottle holders...
  • Page 391 5-3. Using the storage features Open tray Instrument panel  Driver’s side instrument panel  Push the tab to open. Front of console  WARNING Items unsuitable for storing ■ Second seats  (Overhead) Do not store items heavier than 0.44 lb.
  • Page 392 5-3. Using the storage features Third seats  WARNING Items unsuitable for the open ■ tray Observe the following precautions when putting items in the open tray. Failure to do so may cause items to be thrown out of the tray in the event of sudden braking or steering.
  • Page 393: Luggage Compartment Features

    5-3. Using the storage features Luggage compart- WARNING ment features When the cargo net is not in ■ To avoid injury, always return the Cargo hooks hooks to their stowed positions when not in use. Pull down the hook to use. The cargo hooks are provided for Grocery bag hooks securing loose items.
  • Page 394 5-3. Using the storage features Remove the center deck compress the other end and board (P.396) and take out insert it into the other recess. the luggage cover unit. Pull out the luggage cover ■ Installing the luggage cover and hook it onto the anchors. Fold down the third seats.
  • Page 395 5-3. Using the storage features Compress the end of the lug- WARNING gage cover and lift the lug- Luggage cover ■ gage cover up. When installing/stowing the lug- ● gage cover, make sure that the luggage cover is securely installed/stowed. Failure to do so may result in serious injury in the event of sudden braking or a collision.
  • Page 396 5-3. Using the storage features Deck board Deck under tray Opening the deck board ■ Pull the strap upwards to open the center deck board. To fix the center deck board at the upright position, using the straps of the back side of the third-row seats, fasten the velcro tapes to the under- side of the center deck...
  • Page 397 5-4. Using the other interior features Other interior features Rear of console box 5-4.Using the other interior features  USB charging ports The USB charging ports are used to supply 3 A of electricity at 5 V to external devices. The USB charging ports are for charging only.
  • Page 398 5-4. Using the other interior features Additionally, depending on the NOTICE portable device, the wireless To prevent damage to the ■ charger may not operate prop- USB charging ports erly. Refer to the operation man- Do not insert foreign objects into ●...
  • Page 399 5-4. Using the other interior features center of the coil of the portable wireless charger will restart device is placed within the charge charging. area.  If a portable device is moved Additionally, if 2 or more portable significantly within the devices are placed on the charging area, the charging charging tray at the same time,...
  • Page 400 5-4. Using the other interior features ■ Operation indicator light status Operation indicator light Conditions Multimedia Charging tray Display When the Multimedia power supply is off Turning off Disappear or ACC OFF On Standby (charging possible state) Green (comes Gray When charging is complete Orange Blue...
  • Page 401 5-4. Using the other interior features Operation indicator light Suspected causes/Handling method Multimedia Charging tray Display AM radio stations are being automatically selected  Wait until the system has completed the automatic selection of AM radio stations. In the case that automatic Green (comes Blue selection cannot be completed, stop...
  • Page 402 5-4. Using the other interior features Operation indicator light Suspected causes/Handling method Multimedia Charging tray Display Foreign substance detection: A metallic foreign substance is in the charge area, and so the abnormal heating prevention function of the metallic foreign object operated ...
  • Page 403 5-4. Using the other interior features Operation indicator light Suspected causes/Handling method Multimedia Charging tray Display Safety shutdown resulting when the tem- perature within the wireless charger Orange exceeded the set value (Repeatedly  Stop charging, remove the portable Gray flashes 4 times device from the wireless charger, continuously)
  • Page 404 5-4. Using the other interior features portable device, wait until the porta- play, airport, or other facility that ble device cools down and charge it generates strong radio waves or again. electrical noise ● Also, to decrease the temperature The electronic key is not inside the inside the wireless charger, a fan vehicle may operate.
  • Page 405 Failure to do so may result in the Contact your Toyota dealer. possibility of fire, equipment fail- ure or damage, or burns due to If the smartphone OS has been ■...
  • Page 406 5-4. Using the other interior features Armrest WARNING Do not cover the wireless char- ● Second seats (8-seat models)  ger with a cloth or other object while charging. Pull the armrest down for use. NOTICE To prevent failure or damage ■...
  • Page 407 5-4. Using the other interior features WARNING Items that must not be hung ■ on the hook Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield air- bags deploy, these items may become projectiles, causing death or serious injury.
  • Page 408 5-4. Using the other interior features Power outlets (120 VAC) (if equipped) Accessories that use less than 100 W. Open the lid. The power outlet can be used ■ when The engine switch is in ACC or ON. Using the power outlet ■...
  • Page 409 5-4. Using the other interior features To use the side extender, NOTICE place the visor in the side To avoid damaging the power ■ position, then slide it back- outlet ward. Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that Vanity mirrors enter the power outlet may cause...
  • Page 410 5-4. Using the other interior features Rear door sunshades NOTICE To ensure normal operation ■ Pull the tab up. of the sunshades Do not put anything in an area ● where it may interfere with the operation of a rear door sun- shade.
  • Page 411: Garage Door Opener

    Garage door operation indi- The programming procedures can cators also be found at the following URL. ® HomeLink icon Website: www.homelink.com/toyota ® Illuminates while HomeLink operating. Buttons Vehicles with Digital Rearview  Mirror For support, contact customer sup- port at the following.
  • Page 412 5-4. Using the other interior features Illuminates above each button Programming the Home- selected. ® Link Buttons Before programming Home- ■ Codes stored in the Home- ■ ® Link ® Link memory  During programming, it is pos- The registered codes are not ●...
  • Page 413 5-4. Using the other interior features ® Vehicles with auto anti-glare  HomeLink indicator light inside rear view mirror flashes (orange). Point the remote control transmitter for the device at the rear view mirror, 1 to 3 in. (25 to 75 mm) from the ®...
  • Page 414 5-4. Using the other interior features second intervals, repeatedly, code programming. ® Locate the “Learn” or “Smart” until the HomeLink indicator button on the garage door light changes from slowly flash- opener motor in the garage. ing (orange) to rapidly flashing (green) (rolling code) or continu- This button can usually be found where the hanging antenna wire is...
  • Page 415 5-4. Using the other interior features motor operates when the ble device. (To check device ® compatibility, refer to HomeLink button is www.homelink.com.) pressed, the garage door Within 5 seconds after pro- opener motor recognizes the gramming the garage door ®...
  • Page 416 5-4. Using the other interior features ing that 2-way communica- Vehicles with auto anti-glare  tion is enabled. inside rear view mirror ■ Reprogramming a single ® HomeLink button When the following procedure is performed, buttons which already have devices registered to them can be overwritten: Press and hold the desired ®...
  • Page 417 5-4. Using the other interior features If you sell your vehicle, be sure to Color Status erase the programs stored in the Opening/closing ® HomeLink memory. Green has completed Vehicles with auto anti-glare  Feedback sig- inside rear view mirror Red (flashing) nals cannot be received...
  • Page 418 5-4. Using the other interior features...
  • Page 419: Maintenance And Care

    Maintenance and care 6-1. Maintenance and care Cleaning and protecting the vehicle exterior ..Cleaning and protecting the vehicle interior ... 6-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......6-3. Do-it-yourself mainte- nance Do-it-yourself service pre- cautions.....
  • Page 420: Maintenance And Care Cleaning And Protecting The Vehicle Exterior

    6-1. Maintenance and care ● Cleaning and protect- Rear spoiler may not be washable 6-1.Maintenance and care in some automatic car washes. ing the vehicle exte- There may also be an increased rior risk of damage to vehicle. ■ High pressure car washes As water may enter the cabin, do Perform cleaning in a man- not bring the nozzle tip near the...
  • Page 421 When cleaning the windshield ■ function correctly. If this occurs, (vehicles with rain-sensing consult your Toyota dealer. windshield wipers) Toyota Safety Sense 3.0 Set the wiper switch to off. ● If the switch is in “AUTO”, the wip- ●...
  • Page 422 6-1. Maintenance and care When using a high pressure ■ NOTICE car wash • If coal tar or tree sap is present When washing the vehicle, do ● on the paint surface not spray the camera or its sur- rounding area directly with a •...
  • Page 423: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protect- NOTICE ing the vehicle interior Handling of the decorative ■ plastic parts (some 20-inch wheels ) Perform cleaning in a man- Do not hold a wheel by the deco- ner appropriate to each rative plastic parts to lift up or component and its material.
  • Page 424 6-1. Maintenance and care • Steering wheel: Organic sub- WARNING stances, such as thinner, and Water in the vehicle ■ cleaner that contains alcohol Do not splash or spill liquid in ● Do not use polish wax or polish ● the vehicle.
  • Page 425 Allow the leather to dry in a shaded and ventilated area. Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.
  • Page 426: 6-2. Maintenance

    Repair and replacement ■ exposure and wash any It is recommended that genuine affected area immediately. Toyota parts be used for repairs to Battery posts, terminals and ● ensure performance of each sys- related accessories contain lead tem. If non-Toyota parts are used in...
  • Page 427: General Maintenance

    Please be aware that do-it-your- self maintenance may affect Check the connec- Battery warranty coverage. tions. (P.440) The use of Toyota repair manuals is Is the brake fluid at recommended. Brake fluid the correct level? (P.439) For details about warranty cover- age, refer to the separate “Owner’s...
  • Page 428 6-2. Maintenance Items Check points Items Check points There should not • Does the brake Exhaust sys- be any fumes or pedal move strange sounds. smoothly? • Does the brake The radiator, con- pedal have Radiator, con- denser and inter- appropriate denser and cooler radiator...
  • Page 429 6-2. Maintenance Items Check points Vehicle exterior • Do all the lights Items Check points come on? Lights • Are the head- • Do the doors lights aimed cor- Doors operate rectly? (P.465) smoothly? • Does the park- • Does the engine ing brake switch Engine hood hood lock system...
  • Page 430: Emission Inspection And Mainte- Nance (I/M) Programs

    If the malfunction indica- If your vehicle does not tor lamp comes on pass the I/M test The OBD system determines Contact your Toyota dealer to that a problem exists some- prepare the vehicle for re-test- where in the emission control ing.
  • Page 431: Do-It-Yourself Service Precautions

    6-3. Do-it-yourself maintenance Do-it-yourself service 6-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Cool- ant” or a similar If you perform maintenance high quality eth- by yourself, be sure to fol- ylene gly- low the correct procedure col-based as given in these sections.
  • Page 432 6-3. Do-it-yourself maintenance Items Parts and tools Do not leave anything that may ● burn easily, such as paper and Headlight aim • Phillips-head rags, in the engine compart- (P.465) screwdriver ment. • Bulb with same Do not smoke, cause sparks or ●...
  • Page 433: Hood

    6-3. Do-it-yourself maintenance Hood WARNING When the hood is open ■ Opening the hood Even if the engine switch is turned off, the cooling fan may continue to operate for a short time. When Pull the hood lock release the cooling fan is rotating, do not lever.
  • Page 434: Positioning A Floor Jack

    6-3. Do-it-yourself maintenance ■ Positioning a floor Rear jack When using a floor jack, fol- low the instructions in the manual provided with the jack and perform the opera- tion safely. When raising your vehicle with a floor jack, position the jack correctly.
  • Page 435: Engine Compartment

    6-3. Do-it-yourself maintenance Engine compartment Components Fuse boxes (P.462) Engine oil filler cap (P.437) Battery (P.440) Brake fluid reservoir (P.439) Washer fluid tank (P.442) Radiator (P.439) Electric cooling fan Condenser (P.439) Engine oil level dipstick (P.435) Intercooler radiator (P.439) Intercooler coolant reservoir (P.438) Engine coolant reservoir (P.438) temperature and turned off, Checking the engine oil...
  • Page 436 6-3. Do-it-yourself maintenance Park the vehicle on level NOTICE ground. After warming up the To prevent serious engine ■ engine and turning off the damage engine, wait about 5 minutes Check the oil level on a regular for the oil to drain back into basis.
  • Page 437 6-3. Do-it-yourself maintenance sure that the engine is warmed up. If mark and refill upper limit mark. the engine oil level exceeds the refill upper limit mark, contact your Toy- ota dealer. Adding engine oil ■ Checking the oil type and preparing the item needed Make sure to check the oil type and prepare the items needed...
  • Page 438 Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recy- Reservoir cap cling or disposal.
  • Page 439 Coolant is neither plain water nor Coolant selection ■ straight antifreeze. The correct Only use “Toyota Super Long Life mixture of water and antifreeze Coolant” or a similar high quality must be used to provide proper ethylene glycol based non-silicate,...
  • Page 440 6-3. Do-it-yourself maintenance NOTICE If the fluid level is low or high ■ It is normal for the brake fluid level to go down slightly as the brake pads wear out or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, there may be a serious problem.
  • Page 441 If the system will not start even after multiple attempts at all the methods If electrolyte gets on your skin ● above, contact your Toyota dealer. Wash the affected area thor- oughly. If you feel pain or burn- ing, get medical attention WARNING immediately.
  • Page 442 6-3. Do-it-yourself maintenance WARNING NOTICE When there is insufficient bat- Do not use any fluid other ■ ■ tery fluid than washer fluid Do not use if there is insufficient Do not use soapy water or engine fluid in the battery. There is a pos- antifreeze instead of washer fluid.
  • Page 443: Tires

    Check the spare tire condition If you are not sure, consult with your and pressure if not rotated. Toyota dealer. ■ Tire life Any tire over 6 years old must be checked by a qualified technician even if it has seldom or never been used or damage is not obvious.
  • Page 444 Do not use tire sizes other than ● tion and handling performance com- those recommended by Toyota. pared with summer tires in highway driving. Do not mix differently con- ●...
  • Page 445 A warning with the tire pressure To equalize tire wear and extend warning light and warning buzzer tire life, Toyota recommends that when there is a known level of low tire rotation is carried out at the tire pressure with the appearance same interval as tire inspection.
  • Page 446 In the following cases, the tire formed while the vehicle is moving. pressure warning system may not operate properly. Turn the engine switch to • If non-genuine Toyota wheels are used. • A tire has been replaced with a Select of the multi-infor- tire that is not an OE (Original Equipment) tire.
  • Page 447 If a liquid seal- ant is used, contact your Toyota When new tire pressure warning dealer or other qualified service valves and transmitters are shop as soon as possible. Make...
  • Page 448 6-3. Do-it-yourself maintenance Select “Tire Rotation” and Registering the position of each wheel then press Select “Yes” and then press ■ When to register the posi- tion of each wheel It is necessary to register the A message indicating that wheel position of each wheel after per- position registration is being per- formed will be displayed on the...
  • Page 449 6-3. Do-it-yourself maintenance ■ Wheel position registration pro- such as due to carried load, cedure etc. ● If the engine switch is turned off  When the tire inflation pres- while registering the wheel posi- tion, the next time the engine sure is changed such as switch is turned to ON, the wheel when the tire size is changed.
  • Page 450 6-3. Do-it-yourself maintenance Select “Vehicle Settings” and be set while the vehicle is moving. Select of the multi-infor- then press and hold mation display using the Select “TPWS setting” and meter control switches and then press then press Select “Tire Pressure Setting” Select “Vehicle Settings”...
  • Page 451 Toyota dealer. setting was performed. Therefore, a warning may be output even if WARNING the tire inflation pressure drops...
  • Page 452 6-3. Do-it-yourself maintenance vehicle is moving. Select “Yes” and then press Select of the multi-infor- mation display using the The tire pressure warning light will meter control switches and slowly blink 3 times and a message indicating that ID code registration then press is being performed will be displayed on the multi-information display.
  • Page 453 ID code registration is performed tered even when performing the while driving at a vehicle speed of above procedure, contact your approximately 25 mph (40 km/h) Toyota dealer. or more. ■ Canceling ID code registration ● ID codes can be registered by...
  • Page 454 6-3. Do-it-yourself maintenance ID codes can be registered by your- indicating that change is occurring will be displayed, and the wheel set self. (P.451) change will begin.  Only a change between both Wheel set change will begin and registered wheel set is possi- the tire pressure warning light will blink for 1 minute and then illumi- ble, mixing between these...
  • Page 455: Tire Inflation Pressure

    6-3. Do-it-yourself maintenance 10Register the position of each Tire inflation pressure wheel. (P.448) Checking the specified ■ If “Tire Set Switching Incom- tire inflation pressure plete Try Tire Set Registration Again See Owner's Manual” is displayed The recommended cold tire The wheel set change could not be inflation pressure and tire size completed.
  • Page 456 ● and wheel Damage to the drive train ● If a tire needs frequent inflating, Wheel deformation and/or tire ● have it checked by your Toyota damage dealer. Greater possibility of tire dam- ● Instructions for checking tire ■ age while driving (due to road...
  • Page 457: Wheels

    Replacement wheels are avail- able at your Toyota dealer. : Conventionally referred to as off- set. Toyota does not recommend using the following: ...
  • Page 458 ● leaking wheel which is designed tions for a tubeless tire. Doing so may result in an acci-  Use only Toyota wheel nuts dent, causing death or serious injury. and wrenches designed for use with your aluminum When installing the wheel ■...
  • Page 459: Air Conditioning Filter

    6-3. Do-it-yourself maintenance Air conditioning filter claws ( ), and remove the filter cover. The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removing the air condi- tioning filter Turn the engine switch off. Remove the filter case. Open the glove box.
  • Page 460: Electronic Key Battery

     Small flathead screwdriver  Lithium battery CR2450 Use a CR2450 lithium battery ■ Batteries can be purchased at ● your Toyota dealer, local electrical appliance shops or camera stores. Replace only with the same or ● equivalent type recommended by the manufacturer.
  • Page 461 Insert a new battery with the “+” ter- batteries from children. If the cover cannot be firmly ● closed, stop using the electronic key and stow the key in the place where children cannot reach, and then contact your Toyota dealer.
  • Page 462: Checking And Replacing Fuses

    6-3. Do-it-yourself maintenance Checking and replac- WARNING ing fuses If you accidentally swallow a ● battery or put a battery into a part of your body, get emer- If any of the electrical com- gency medical attention imme- ponents do not operate, a diately.
  • Page 463 6-3. Do-it-yourself maintenance Normal fuse Blown fuse Type B  Remove the fuse with the pullout tool. Only some fuses can be removed using the pullout tool. Normal fuse Blown fuse Type C  Check if the fuse is blown. Replace the blown fuse with a new fuse of an appropriate amperage rating.
  • Page 464 Have the cause of electrical over- load determined and repaired by If the lights do not turn on even ● your Toyota dealer as soon as after the fuse has been replaced, possible. a bulb may need replacement. (P.466) If the replaced fuse blows again, ●...
  • Page 465: Headlight Aim

    If the headlight cannot be adjusted Make sure the vehicle has a using this procedure, take the vehi- full tank of gasoline and the cle to your Toyota dealer to adjust area around the headlight is the headlight aim. not deformed.
  • Page 466: Light Bulbs

    (bulb type) each consist of a number of LEDs. If any of the LEDs burn out, ■ Front take your vehicle to your Toyota dealer to have the light replaced. ■ Condensation build-up on the inside of the lens...
  • Page 467 6-3. Do-it-yourself maintenance base and light unit. Replacing light bulbs Front turn signal ■ lights/parking lights (bulb type) Turn the bulb base counter- clockwise and remove it. WARNING To prevent injury ■ Before performing any light bulb replacement procedure, be sure to turn the engine switch off.
  • Page 468 6-3. Do-it-yourself maintenance WARNING Do not attempt to repair or dis- ● assemble the light bulbs, con- nectors, electric circuits or component parts. Doing so may result in death or serious injury due to electric shock. To prevent damage or fire ■...
  • Page 469: When Trouble Arises

    When trouble arises If the vehicle becomes stuck 7-1. Essential information ........Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is submerged or water on the road is ris- ing ......7-2.
  • Page 470: Emergency Flashers

    7-1. Essential information Emergency flashers If your vehicle has to 7-1.Essential information be stopped in an emer- gency The emergency flashers are used to warn other drivers when the vehicle has to be Only in an emergency, such stopped on the road due to as if it becomes impossible a breakdown, etc.
  • Page 471: If The Vehicle Is Submerged Or Water On The Road Is Rising

    7-1. Essential information more, or press it briefly 3 If the vehicle is sub- times or more in succession. merged or water on the road is rising This vehicle is not designed to be able to drive on roads that are deeply floodedwith water.
  • Page 472 Laminated glass cannot be shat- tered with an emergency hammer : Contact your Toyota dealer or aftermarket accessory manufac- turer for further information about an emergency hammer. : If equipped How to distinguish laminated ■...
  • Page 473: 7-2. Steps To Take In An Emergency

    7-2. Steps to take in an emergency From the front (AWD models) If your vehicle needs 7-2.Steps to take in an emergency  to be towed If towing is necessary, we recommend having your vehicle towed by your Toy- ota dealer or commercial towing service, using a wheel-lift type truck or flat- bed truck.
  • Page 474 7-2. Steps to take in an emergency WARNING NOTICE When towing the vehicle To prevent damage to the ■ ■ vehicle when towing using a 2WD models  wheel-lift type truck Be sure to transport the vehicle Do not tow the vehicle from the ●...
  • Page 475: If You Think Something Is Wrong

    Do not secure cables or chains to lowing symptoms, your the suspension components. vehicle probably needs adjustment or repair. Con- tact your Toyota dealer as soon as possible. Visible symptoms  Fluid leaks under the vehicle (Water dripping from the air conditioning after use is nor- mal.)
  • Page 476: Fuel Pump Shut Off System

    7-2. Steps to take in an emergency side when braking Fuel pump shut off system  Vehicle pulls heavily to one side when driving on a level road To minimize the risk of fuel leakage when the engine  Loss of brake effectiveness, stalls or when an airbag spongy feeling, pedal almost inflates upon collision, the...
  • Page 477: If A Warning Light Turns On Or A Warning Buzzer Sounds

     The brake fluid level is low; or (U.S.A.)  The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. (red) (Canada) ■...
  • Page 478 ■ SRS warning light Warning light Details/Actions Indicates a malfunction in:  The SRS airbag system;  The front passenger occupant classification system; or  The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately.
  • Page 479 ABS warning light Warning light Details/Actions Indicates a malfunction in:  The ABS; or (U.S.A.)  The brake assist system  Have the vehicle inspected by your Toyota dealer immediately. (Canada) ■ Inappropriate pedal operation warning light (warning buzzer) Warning light...
  • Page 480 7-2. Steps to take in an emergency ■ Driver’s and front passenger’s seat belt reminder light (warn- ing buzzer) Warning light Details/Actions Warns the driver and/or front passenger to fasten their seat belts  Fasten the seat belt. If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off.
  • Page 481 When the light comes on after blinking for approximately 1 minute (a buzzer does not sounds): Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. ■ Stop & Start cancel indicator Warning light Details/Actions Indicates a malfunction in the Stop &...
  • Page 482 7-2. Steps to take in an emergency ■ LDA indicator (warning buzzer) Warning light Details/Actions Indicates a malfunction in the LDA (Lane Departure Alert).  Follow the instructions displayed on the multi-infor- mation display. (yellow) ■ PDA indicator (warning buzzer) Warning light Details/Actions Indicates a malfunction in the PDA (Proactive Driving...
  • Page 483 Warning light Details/Actions When a buzzer sounds: Indicates a malfunction in the intuitive parking assist func- tion  Have the vehicle inspected by your Toyota dealer immediately. When a buzzer sounds: (if equipped) Indicates that the system is temporarily unavailable, possi- bly due to a sensor being dirty or covered with ice, etc.
  • Page 484  The Multi-terrain Select system  The Trailer Sway Control ; or  The hill-start assist control system  Have the vehicle inspected by your Toyota dealer immediately. When the warning light flashes: Indicates that the ABS, VSC, TRAC or Trailer Sway Control...
  • Page 485 Side impact sensors (front door) There may be a malfunction in the tire pressure warning system. Have ● Side impact sensors (front) the vehicle inspected by your Toyota ● Side impact sensors (rear door) dealer immediately. ● Front passenger occupant classifi- ...
  • Page 486 Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by WARNING the nearest Toyota dealer. If both the ABS and the brake ■ Avoid abrupt maneuvering and ●...
  • Page 487 7-2. Steps to take in an emergency Your vehicle has also been WARNING equipped with a TPMS (tire pres- As an added safety feature, your sure warning system) malfunc- vehicle has been equipped with a tion indicator to indicate when the tire pressure monitoring system system is not operating properly.
  • Page 488: If A Warning Message Is Displayed

    (P.477) If a warning message is dis- played again after the appropriate actions have been performed, contact your Toyota dealer.
  • Page 489 Messages and warnings The warning lights and warning buzzers operate as follows depend- ing on the content of the message. If a message indicates the need for inspection by a dealer, have the vehicle inspected by your Toyota dealer immediately. Warning...
  • Page 490 ● LTA (Lane Tracing Assist) The following systems may be mal- ● functioning. Have the vehicle LCA (Lane Change Assist) (if inspected by your Toyota dealer equipped) immediately. ● AHB (Automatic High Beam) ● The LED headlight system ●...
  • Page 491 LCA (Lane Change Assist) (if methods. equipped) • Check the voltage of the battery ● AHB (Automatic High Beam) • Check the sensors that the Toyota ● Dynamic radar cruise control Safety Sense 3.0 uses for foreign matter covering them. Remove ●...
  • Page 492 7-2. Steps to take in an emergency ● Dynamic radar cruise control such as a desert, grasslands, sub- urbs, etc. The message may be ● RSA (Road Sign Assist) (if cleared by driving the vehicle in an equipped) area with structures, vehicles, etc. nearby.
  • Page 493 Indicates one of the following sys- operating abnormally. Have the tems is disabled. vehicle inspected by your Toyota ● Dynamic radar cruise control dealer. ● Cruise control ■...
  • Page 494 If “Oil Maintenance Required Visit Your Dealer” is displayed Indicates that the engine oil should be changed. Check and change the engine oil, and oil filter by your Toyota dealer. After changing the engine oil, make sure to reset the message. (P.437) ■...
  • Page 495: If You Have A Flat Tire

    7-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a compact spare tire. The flat tire can be replaced with the compact spare tire. For details about tires: P.443 WARNING If you have a flat tire ■...
  • Page 496 7-2. Steps to take in an emergency Location of the spare tire, jack and tools Compact spare tire Jack Jack handle Wheel nut wrench Wheel lock key (if equipped) Put the jack properly in its jack WARNING ● point. Using the tire jack ■...
  • Page 497 (P.496) wheel lock nut and wheel lock key. If in doubt about wheel lock Removal ■ application, contact your Toyota For ease of removal, the wheel dealer. lock nut should always be the...
  • Page 498 7-2. Steps to take in an emergency Disengage the 5 claws and Taking out the jack pull the cover to remove it. Remove the center deck board. (P.396) Take out the jack. Disengage the tightening strap. Remove the center deck under tray.
  • Page 499 7-2. Steps to take in an emergency lock. Replacing a flat tire Chock the tires. Turn the tire jack portion by hand until the notch of the jack is in contact with the jack Wheel chock point. Flat tire positions The jack point guides are located under the rocker panel.
  • Page 500 • If there are any cracks or defor- mations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • Do not attach a heavily dam- aged wheel ornament, as it may fly off the wheel while the vehi- cle is moving.
  • Page 501 7-2. Steps to take in an emergency motion, causing the tire to come off. Vehicles with wheel locks: Tighten the wheel lock using the wheel lock key after tightening the other wheel nuts. Tightening torque: 103 ft•lbf (140 N•m, 14.3 kgf•m) Install the spare tire and loosely tighten each wheel nut by hand by approximately...
  • Page 502 • PKSB (Parking Support Brake) When using the compact ■ (if equipped) spare tire Remember that the compact • Toyota parking assist monitor (if ● spare tire provided is specifi- equipped) cally designed for use with your • Panoramic view monitor (if vehicle.
  • Page 503: If The Engine Will Not Start

    When removing or fitting the tem. (P.72) wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the The starter motor turns tire pressure warning valve and over slowly, the interior transmitter may be damaged if not handled correctly.
  • Page 504  The battery may be dis- described in P.507 within 5 sec- charged. (P.508) onds. Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Starting the engine in an emergency...
  • Page 505: If You Lose Your Keys

    If the fuel filler door cannot be opened New genuine mechanical keys can be made by your If the fuel filler door opener Toyota dealer using another switch cannot be operated, mechanical key and the key contact your Toyota dealer number stamped on your to service the vehicle.
  • Page 506: If The Electronic Key Does Not Operate Properly

    These settings must be customized key-related problems at your Toyota dealer. Take your vehicle with all the elec- : If equipped tronic keys provided with your vehicle to your Toyota dealer. Locking and unlocking the doors Use the mechanical key...
  • Page 507 Toyota dealer. ing any of their body parts caught in the window or the panoramic moon roof.
  • Page 508: If The Vehicle Battery Is Discharged

    7-2. Steps to take in an emergency If the vehicle battery Restarting the engine is discharged If you have a set of jumper (or booster) cables and a second The following procedures vehicle with a 12-volt battery, may be used to start the you can jump start your vehicle engine if the vehicle’s bat- by following the steps below.
  • Page 509 Metallic point shown in the illustration Once the engine starts, have the Start the engine of the sec- ond vehicle. Increase the vehicle inspected at your Toyota engine speed slightly and dealer as soon as possible. maintain at that level for ■...
  • Page 510 7-2. Steps to take in an emergency inspected at your Toyota dealer. careful when reconnecting the battery. Some systems may require initial- ● ization. (P.552) Some systems may require initial- ● ization. (P.552) When removing the battery ter- ■ The Stop & Start system may not minals ●...
  • Page 511 ● For information regarding bat- of the jumper cables to come ● tery replacement, contact your into contact with each other. Toyota dealer. Do not smoke, use matches, ● When disconnecting the bat- cigarette lighters or allow open ■ tery flame near the battery.
  • Page 512: If Your Vehicle Overheats

    Cooling fan increase.) If a large amount of coolant leaks,  “Engine Coolant Temp High immediately contact your Toyota Stop in a Safe Place See dealer. Owner’s Manual” is shown The coolant level is satisfac- on the multi-information dis- tory if it is between the play.
  • Page 513 (The fan may not operate in freez- ing temperatures.) Reservoir If the fan is not operating: Stop the engine immediately “FULL” line and contact your Toyota “LOW” line dealer. Add coolant if necessary. If the fan is operating: Water can be used in an emer- Have the vehicle inspected at gency if coolant is unavailable.
  • Page 514: If The Vehicle Becomes Stuck

    7-2. Steps to take in an emergency If the vehicle becomes WARNING stuck Keep hands and clothing (espe- ● cially a tie, a scarf or a muffler) away from the fan and belts. Carry out the following pro- Failure to do so may cause the cedures if the tires spin or hands or clothing to be caught, resulting in serious injury.
  • Page 515 7-2. Steps to take in an emergency WARNING When attempting to free a ■ stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people.
  • Page 516 7-2. Steps to take in an emergency...
  • Page 517: Vehicle Specifications

    Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 8-2. Customization Customizable features ........8-3. Initialization Items to initialize ..
  • Page 518: Maintenance Data (Fuel, Oil Level, Etc.)

    8 (Front 2, Rear 6) Vehicle identification ■ Vehicle identification num- for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- The vehicle identification num- tering the ownership of your ber (VIN) is the legal identifier...
  • Page 519 8-1. Specifications vehicle. This number is stamped on the top left of the instrument panel. ■ Engine number The engine number is stamped on the engine block as shown. This number is also on the Certi- fication Label. Engine Model T24A-FTS 4-cylinder in line, 4-cycle, gasoline Type...
  • Page 520 Engine oil selection the characteristic of the oil “Toyota Genuine Motor Oil” is which allows cold startability. used in your Toyota vehicle. Use Oils with a lower value before Toyota approved “Toyota Genu- the W allow for easier starting ine Motor Oil” or equivalent to of the engine in cold weather.
  • Page 521 Do not use plain water alone. : The coolant capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. Ignition system (spark plug) Make NGK DILZKAR8E7H 0.03 in. (0.7 mm)
  • Page 522 Fluid capacity Fluid type Toyota Genuine ATF WS : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE Transmission fluid type ■ Using transmission fluid other than the above type may cause abnormal noise or vibration, or damage the transmission of your vehicle.
  • Page 523 Toyota Genuine Differential gear oil LT Oil type and viscosity 75W-85 GL-5 or equivalent : The oil capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE Differential gear oil type precaution ■ Using differential gear oil other than the specified oil may cause abnormal noise or vibration, or damage the differential gear of your vehicle.
  • Page 524 8-1. Specifications Tires and wheels Type A  Tire size 255/65R18 111H, T165/90D18 107M (spare)  Front 35 psi (240 kPa, 2.4 kgf/cm or bar) Tire inflation pressure  Rear (Recommended cold tire 35 psi (240 kPa, 2.4 kgf/cm or bar) inflation pressure) ...
  • Page 525 8-1. Specifications Light bulbs Light bulbs Bulb No. Type Front turn signal/parking lights Exterior 7444NA 28/8 (bulb type) A: Wedge base bulbs (amber)
  • Page 526: Fuel Information

    (Methylcyclopentadienyl Manga- use of Top Tier Detergent Gaso- nese Tricarbonyl). line. For more information on Top Toyota does not recommend the use Tier Detergent Gasoline and a list of gasoline that contains MMT. If of marketers, please go to the offi- fuel containing MMT is used, your cial website www.toptiergas.com.
  • Page 527 The malfunction indicator lamp on If poor driveability (poor hot start- the instrument cluster may come on. ing, vaporization, engine knock- If this happens, contact your Toyota ing, etc.) is encountered after dealer for service. using a different type of fuel, dis-...
  • Page 528: Tire Information

    8-1. Specifications Tire information Typical tire symbols  Full-size tire Compact spare tire  Tire size (P.530) DOT and Tire Identification Number (TIN) (P.529) Location of treadwear indicators (P.443) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
  • Page 529 8-1. Specifications A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pres- sure.
  • Page 530 8-1. Specifications Speed symbol (alphabet with DOT symbol one letter) Tire Identification Number ■ Tire dimensions (TIN) Tire manufacturer’s identifi- cation mark Manufacturer’s code Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Fed- eral Motor Vehicle Safety Stan- Section width dards.
  • Page 531 Your Toyota dealer will help answer and concrete. any questions you may have as you read this information. A tire marked C may have poor ■...
  • Page 532 8-1. Specifications Grade C corresponds to a level of Warning: The temperature grades performance which all passenger of a tire assume that it is properly car tires must meet under the Fed- inflated and not overloaded. eral Motor Vehicle Safety Standard Excessive speed, underinflation, or No.
  • Page 533 8-1. Specifications Tire related term Meaning The sum of: (a) Curb weight Maximum loaded vehicle (b) Accessory weight weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occu- pants specified in the second column of Normal occupant weight Table 1 that follows...
  • Page 534 8-1. Specifications Tire related term Meaning The load on an individual tire that is deter- mined by distributing to each axle its share of curb weight, accessory weight, and nor- Vehicle normal load on the tire mal occupant weight (distributed in accor- dance with Table 1 below), and dividing by The surface area of the rim not covered by...
  • Page 535 8-1. Specifications Tire related term Meaning A tire designed to operate at higher loads Extra load tire and at higher inflation pressures than the corresponding standard tire Groove The space between two adjacent tread ribs The layer(s) forming the inside surface of a Innerliner tubeless tire that contains the inflating medium within the tire...
  • Page 536 8-1. Specifications Tire related term Meaning A tire intended for use on passenger cars, multipurpose passenger vehicles, and Passenger car tire trucks, that have a gross vehicle weight rating (GVWR) of 10,000 lb. or less. A layer of rubber-coated parallel cords A parting of rubber compound between Ply separation adjacent plies...
  • Page 537 8-1. Specifications Tire related term Meaning The rim on which a tire is fitted for testing, Test rim and may be any rim listed as appropriate for use with that tire That portion of a tire that comes into con- Tread tact with the road A tread section running circumferentially...
  • Page 538: 8-2. Customization

    Customizable Features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further...
  • Page 539 Settings that can be changed using the Multimedia Display Settings that can be changed using the meter control switches Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, — = Not available ■...
  • Page 540 8-2. Customization Customized set- Function Default setting ting Trip average (Average fuel consumption Total average [after start]) (Average fuel Fuel economy — — consumption Tank average [after reset]) (Average fuel consumption [after refuel]) Audio system linked — — display AWD operation status —...
  • Page 541 8-2. Customization Customized set- Function Default setting ting On (when the vehicle is Suggestion function — — stopped) Stop light indicator — — : This setting changes in accordance with My Settings : The default setting varies according to country. : 12.3-inch display : The on/off operation of the widget can be changed.
  • Page 542 8-2. Customization Customized set- Function Default setting ting Shift position Automatic door lock- linked door Speed linked — locking opera- ing function door locking tion operation Shift position Driver’s door Automatic door linked door — linked door unlocking oper- unlocking function unlocking opera- ation tion...
  • Page 543 8-2. Customization : If equipped ■ Smart key system and wireless remote control (P.115, 136) Customized set- Function Default setting ting Operation buzzer vol- — 1 to 7 Operation signal — (Emergency flashers) Time elapsed before automatic door lock 30 seconds function is activated if 60 seconds —...
  • Page 544 8-2. Customization ■ Wireless remote control (P.110, 115, 119) Customized set- Function Default setting ting Driver’s door unlocked in All doors one step, all unlocked in one — Unlocking operation doors unlocked step in two step Panic function — — One short press Push twice Power back door...
  • Page 545 8-2. Customization ■ Automatic light control system (P.218) Customized set- Function Default setting ting Brighter Bright Light sensor sensitiv- Normal — Dark Darker Time elapsed before headlights automati- 60 seconds 30 seconds — cally turn off after 90 seconds doors are closed Windshield wiper linked headlight illumi- —...
  • Page 546 8-2. Customization ■ Lane Departure Alert system (P.265) Function Customized setting Lane Departure Alert ON/OFF — — system Default/Earlier — — Alert timing Vibration/Audible — — Alert options : This setting changes in accordance with My Settings ■ Lane Change Assist (P.262) Function Customized setting...
  • Page 547 8-2. Customization Function Customized setting Deceleration Assist ON/OFF — — (DA) Obstacle Anticipation ON/OFF — — Assist (OAA) : This setting changes in accordance with My Settings ■ Road Sign Assist (P.280) Function Customized setting ON/OFF — — Road Sign Assist Excess speed notifica- None/Visual/Visual&Audible —...
  • Page 548 8-2. Customization ■ Driver monitor (P.243) Function Customized setting ON/OFF — — Warning function : If equipped : This setting changes in accordance with My Settings ■ Stop & Start system (P.307) Customized set- Function Default setting ting Change the Stop & Start system duration Standard Extended...
  • Page 549 8-2. Customization : The sound volume is linked among the intuitive parking assist , RCTA, and RCD. ■ RCTA (Rear cross traffic alert) function (P.328) Function Customized setting RCTA (Rear cross traffic On/Off — — alert) function Buzzer volume of RCTA Level1/Level2/Level3 —...
  • Page 550 8-2. Customization ■ Engine switch (P.203) Function Customized setting ACC customization On/Off — Enabling/Disabling ACC mode ■ Rear seat reminder (P.115) Customized set- Function Default setting ting Rear seat reminder — — function : This setting changes in accordance with My Settings ■...
  • Page 551 8-2. Customization Customized set- Function Default setting ting Operation when you approach the vehicle — — with the electronic key on your person Operation when the — — doors are unlocked Footwell lights — — Time elapsed before the outer foot lights 15 seconds 7.5 seconds —...
  • Page 552: 8-3. Initialization

    8-3. Initialization Items to initialize 8-3.Initialization The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle: List of items to initialize Item When to initialize Reference Message indicat- ing maintenance is...
  • Page 553 8-3. Initialization...
  • Page 554: Reporting Safety Defects For Canadian Owners

    8-3. Initialization...
  • Page 555 For owners 9-1. For owners Reporting safety defects for U.S. owners....Reporting safety defects for Canadian owners ..Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)...... Headlight aim instructions for Canadian owners (in French)......
  • Page 556: For Owners

    However, NHTSA can- not become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153);...
  • Page 557: Seat Belt Instructions For Cana- Dian Owners (In French)

    9-1. For owners sécurité. Seat belt instructions for Canadian owners Entretien et soin (in French) Traitement des ceintures de ■ The following is a French sécurité explanation of seat belt Nettoyez avec un chiffon ou une instructions extracted from éponge humidifiés avec de l'eau the seat belt section in this savonneuse tiède.
  • Page 558: Srs Airbag Instructions For Canadian Owners (In French)

    9-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
  • Page 559 9-1. For owners Coussins gonflables rideaux SRS • Contribuent à réduire l’impact au niveau de la tête des occupants des sièges avant et des sièges arrière latéraux • Peut contribuer à empêcher les occupants d’être éjectés du véhicule en cas de tonneau Votre véhicule est équipé...
  • Page 560 9-1. For owners • Si votre volant est réglable, AVERTISSEMENT inclinez-le vers le bas. Cela a Le coussin gonflable conduc- ● pour effet d'orienter le coussin teur SRS se déploie avec une gonflable en direction de votre force considérable et peut occa- poitrine plutôt que de votre tête sionner des blessures graves, et de votre cou.
  • Page 561 être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nourrissons et enfants sur les sièges arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
  • Page 562: Headlight Aim Instructions For Canadian Owners (In French)

    Si un cache en vinyle est fixé ● Si un composant renfermant un ● sur la zone où le coussin gon- coussin gonflable SRS est flable de genoux SRS se endommagé ou fissuré, faites-le déploie, veillez à le retirer. remplacer par votre concession- naire Toyota.
  • Page 563 à aucune ntes ou accessoires des modifications suivantes sans • Pare-buffle ou pare-kangourou consulter votre concessionnaire Toyota. Les coussins gonflables • Chasse-neige SRS peuvent ne pas fonctionner correctement ou se déployer invo- • Treuils lontairement, ce qui peut provo- •...
  • Page 564: What To Do If

    Si vous n'arrivez pas à régler le phare en procédant de la sorte, réglage des phares confiez le véhicule à votre conces- sionnaire Toyota pour qu'il règle le Vérifiez que le réservoir de faisceau des phares. carburant du véhicule est...
  • Page 565: Index

    Index What to do if... (Trouble- shooting) ....Alphabetical Index..
  • Page 566 If you think something is  If you lose your electronic wrong keys, the risk of vehicle theft increases significantly. Con- tact your Toyota dealer imme- The engine does not start diately. (P.505)  Did you press the engine The electronic key does...
  • Page 567 What to do if... (Troubleshooting)  Is the battery discharged? (P.508) Is the parking brake released? (P.212) The shift lever cannot be shifted from P even if you Depending on the situation, depress the brake pedal other types of warning buzzer may also sound.
  • Page 568 What to do if... (Troubleshooting) played, refer to P.477, 488. When a problem has occurred If you have a flat tire  Stop the vehicle in a safe place and replace the flat tire with the spare tire. (P.495) The vehicle becomes stuck ...
  • Page 569: Alphabetical Index

    Alphabetical Index Alphabetical Index Side and curtain shield airbags precautions......41 A/C ...........368 SRS airbags ......37 Air conditioning filter.....459 SRS warning light ....478 Automatic air conditioning sys- Alarm .........73 tem ........368 Warning buzzer ....477 Eco air conditioning mode..373 Anchor brackets ....53, 65 Front seat concentrated airflow Antennas (smart key system)136 mode (S-FLOW)....374...
  • Page 570 Alphabetical Index Warning light ......478 Heated steering wheel and seat Blind Spot Monitor (BSM)..313 heater precautions....381 Brake How your child should wear the Brake hold ......216 seat belt........32 Fluid ......439, 523 Panoramic moon roof precau- Parking brake .......212 tions........169 Warning light ......477 Power back door precautions119 Brake assist ......354 Power window lock switch ..166...
  • Page 571 Alphabetical Index Deck under tray ......396 Drive distance ......92 Defogger Drive information......92 Outside rear view mirrors ..370 Driver’s seat position memory Rear window ......370 Driving position memory ..171 Windshield......370 Memory recall function ..172 Differential Drive-Start Control (DSC) ..185 Rear differential oil ....523 Driving Digital Rear-view Mirror ..152 Break-in tips ......180...
  • Page 572 Alphabetical Index Emergency Driving Stop System Engine coolant ..........298 Capacity .......521 Emergency flashers ....470 Checking ......438 Emergency, in case of Preparing and checking before If a warning buzzer sounds ..477 winter........360 If a warning light turns on ..477 Engine coolant temperature If a warning message is dis- gauge .........81, 84 played.........488...
  • Page 573 Alphabetical Index Front Cross Traffic Alert (FCTA) Fuel pump shut off system..476 ..........277 Fuses ........462 Front fog lights Replacing light bulbs ....466 Front passenger occupant clas- Garage door opener ....411 sification system ....44 Gauges ........81, 84 Front seats Glove box ........388 Adjustment ......141 Glove box light......388 Cleaning .......423...
  • Page 574 Alphabetical Index Retaining hooks (floor mat) ..28 Power back door ....127 Horn .........150 Power windows ....164 I/M test ........430 Keyless entry Identification Smart key system ....136 Engine ........519 Wireless remote control..111 Vehicle........518 Keys If your vehicle has to be stopped Battery-saving function ..137 in an emergency ....470 Electronic key .......110...
  • Page 575 Alphabetical Index Light bulbs Outside rear view mirror defog- Replacing ......466 gers ........370 Lights Outside rear view mirrors ..161 Automatic High Beam system Vanity mirrors......409 ...........220 Moon roof Fog light switch ....223 Door lock linked panoramic Front personal lights.....385 moon roof operation ...168 Headlight switch ....218 Mud &...
  • Page 576 Alphabetical Index Odometer and trip meter display Replacing light bulbs ....466 Display items....82, 87 Parking Support Brake function “ODO TRIP” switch ....83 (moving vehicles rear of the “ODO” switch......88 vehicle) ........345 Function........345 Engine oil ......520 Parking Support Brake function Rear differential oil ....523 (pedestrians rear of the vehicle) Opener ..........346...
  • Page 577 Alphabetical Index Radiator........439 RSA (Road Sign Assist) ..280 RCD (Rear Camera Detection) Function .......334 RCTA Safe Exit Assist.......318 Function .......328 Safety Connect ......68 RCTA function......329 Seat belt reminder light..480 Rear automatic air conditioning Seat belts........31 system........377 Automatic Locking Retractor ..32 Rear Cross Traffic Alert (RCTA) Child restraint system installation ..........328...
  • Page 578 Alphabetical Index Digital Rearview Mirror..156 Side windows......164 Inside rear view mirror..151 Smart key system Intuitive parking assist..322 Antenna location....136 LDA (Lane Departure Alert with Entry functions....115, 121 steering control) ....265 Starting the engine ....203 LTA (Lane Tracing Assist)..257 Snow mode switch ....352 Parking Support Brake function Snow tires .......360 (moving vehicles rear of the...
  • Page 579 Alphabetical Index Fog light switch ....223 Windshield wiper and washer Garage door opener switches switch .........224 ........... 411 Windshield wiper de-icer switch Heated steering wheel switch ...........370 ...........381 Ignition switch.......203 Instrument panel light control Tachometer ......81, 84 switches ......83, 88 Tail lights Intuitive parking assist switch323 Light switch......218...
  • Page 580 Total load capacity ....518 Towing Dinghy towing.......201 Emergency towing....473 Vanity lights ......409 Trailer towing....190, 191 Wattage ........525 Toyota Safety Sense 3.0 Vanity mirrors ......409 AHB (Automatic High Beam) 220 Vehicle data recording ....7 Cruise control .......294 Vehicle identification number518 Driver monitor.......243 Vehicle information display ..92...
  • Page 581 Alphabetical Index Engine ........478 Tire pressure ......481 High coolant temperature..477 Warning messages ....488 Intuitive parking assist..327, 483 Washer LDA (Lane Departure Alert)..482 Adding ........442 Low engine oil pressure ..478 Preparing and checking before LTA (Lane Tracing Assist)...257, winter........360 Switch ........224 Open door ....
  • Page 582 Alphabetical Index · Audio/visual system · Panoramic view monitor · Toyota parking assist monitor...
  • Page 583 Certifications Smart key system ...
  • Page 585 Digital Key ...
  • Page 588 Millimeter wave radar sensor ...
  • Page 589 Smart key system and engine immobilizer system ...
  • Page 590 Intuitive parking assist  BSM (Blind Spot Monitor) ...
  • Page 592 Tire pressure warning system ...
  • Page 593 Garage door opener ...
  • Page 594 Wireless charger ...
  • Page 595 Safety Connect ...
  • Page 598 GAS STATION INFORMATION Auxiliary catch lever (P.433) Fuel filler door (P.232) Hood lock release lever (P.433) Tire inflation pressure (P.524) Fuel filler door opener (P.232) Fuel tank capacity 17.8 gal. (67.5 L, 14.8 Imp. gal.) (Reference) P.519 Fuel type Unleaded gasoline only P.526 Cold tire inflation P.524...

This manual is also suitable for:

Grand highlander hybrid 2024

Table of Contents