VAT 615 Series Installation, Operating, & Maintenance Instructions page 89

29. Slide both o-rings onto shaft till the end
30. Deposit 0.05 ml vacuum grease between
the o-rings
31. Clean shaft from vacuum grease
32. Install mechanical unit into valve body, see
picture
33. Fasten and tighten the 2 mounting screws
with 2.5 Nm
34. Place the plate on the shaft in the valve
body
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 615 DN 40 (I.D. 1½"), DeviceNet
Description
Required tool
Vacuum grease
Cleanroom wipes
Allen torque wrench
3mm
603476EA
89/102
2013-07-25