24. Clean shaft feed through
25. Clean the valve body
26. Lubricate seal contact surface of valve
body with a slight film of 0.0125 ml
vacuum grease
27. Lubricate seal contact surface of shaft with
a slight film of 0.0125 ml vacuum grease
28. Lubricate each o-ring with a slight film of
0.0125 ml vacuum grease.
Pay attention: If required use new o-rings
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 615 DN 40 (I.D. 1½"), DeviceNet
Description
Required tool
Cleanroom wipes soaked
with isopropyl alcohol
Cleanroom wipes soaked
with isopropyl alcohol
Vacuum grease
Vacuum grease
Vacuum grease
603476EA
88/102
2013-07-25