Hardware Installation - Dentsply Sirona X-Smart IQ Getting Started Manual

3

Hardware installation

A According to your iPad
Mini™ model, use the
suitable kit.
Accessories for
iPad Mini™ 1, 2 or 3
Accessories for iPad Mini TM 1, 2 or 3 Accessories for iPad Mini
C Enclose and center the iPad Mini
in the protective case. Place the
corresponding rubber plugs on the
camera and the charging port.
!
For iPad Mini™
1, 2 or 3
!
E
Install the motor handpiece case as
Only for first protective case holder*.
use, please fully
charge the motor
handpiece
(~ 6 hours) to
optimize battery
life.
* The iPad ® protective case and the motor
handpiece cover produce static magnetic fields.
B Stick the foams of
your kit at the places
indicated on the
protective case.
Accessories for
iPad Mini™ 4
TM 4
!
TM D Separate the motor
handpiece cover
from the motor
handpiece support.
For iPad Mini™ 4
F
G
4
Connect the App
!
A Now that your motor
handpiece is fully charged:
Open the application.
B Awaken the motor handpiece
by pressing on the multifunction
button once. Press the button
again to activate the Bluetooth ®
and confirm that the Bluetooth
®
blue LED is blinking.
C Wait a few seconds until the application detects the
motor handpiece.
D Check the motor
handpiece serial
number and click on
the corresponding
number on the
iPad ® screen.
E
When the motor handpiece is connected, the icon
changes and the Bluetooth ® blue LED switches
from blinking to solid.
F Only for the first use, select your stand-alone mode. See
section 6 Motor handpiece operation for more information.
X-Smart IQ™ Getting Started Guide