Pitney Bowes Connect+ Series Operator's Manual page 100

2. Select the graphic you want to move (1). For this example, we select the right justified blue
graphic.
3. You can move the graphic to the left either by tapping the Margin button and entering the distance,
or by tapping the left position button - a single tap moves the image 1 mm. Press and hold for more
than two seconds and the distance increments 0.5 inch (12.7 mm)12 mm every additional second.
If you exceed the allowable distance, the green inter-element link (see 2 in the diagram below)
turns from green to red. In the example here the right margin for the blue element is now at 38 mm.
Refer to 3 in the diagram below.
Pitney Bowes Operator Guide February, 2018
Running mail
Page 100 of 349