Running A Weigh-On-The-Way® (W-O-W®) - First Piece Only Job - Pitney Bowes Connect+ Series Operator's Manual

Running a WEIGH-ON-THE-WAY® (W-O-W®) - First
Piece Only job
Use this method if all of the mail pieces in your job are identical, for example, if they all have the same
number of pages in the same size envelope. Since the system only has to weigh the first piece, this job
runs faster.
In this weighing method, the machine weighs the first mail piece and processes the remaining mail at the
same postage rate. If Shape Based Rating (SBR) class is used, the first envelope is also measured.
Caution:
Do not lean on or disturb the system while it is processing mail in this mode. It will affect
the amount of postage applied to the mail piece.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select a job that uses WEIGH-ON-THE-WAY® (W-O-W®) - first piece only or select the
Weighing icon.
a. Select WOW, first piece only.
b. Select OK.
3. Put all of the mail on the feed deck.
4. Select Start.
Pitney Bowes Operator Guide February, 2018
Running mail
Page 84 of 349