Saving Configuration Changes
After users makes changes to the configuration, press the "Save" button will save but not apply the changes
until the "Apply" button on the top of web GUI page is clicked. Or, users could directly press "Save and
Apply" button. We recommend rebooting or powering cycle the GSC3570 after applying all the changes.
Rebooting from Remote Locations
Press the "Reboot" button on the top right corner of the web GUI page to reboot the GSC3570 remotely.
The web browser will then display a reboot message. Wait for about 1 minute to log in again.
Packet Capture
GSC3570 is embedded with packet capture function. The related options are under Maintenance→Packet
Capture.
Figure 28: Packet Capture
User can also define whether RTP packets will be captured or not from With RTP Packets option.
When the capture configuration is set, press Start button to start packet capture. The Status will become
RUNNING while capturing. Press Stop button to end capture.
Press Download button to download capture file to local PC. The capture file is in .pcap format.
P a g e
|
78
GSC3570 User Manual
Version 1.0.3.1