No Touch Provisioning - Grandstream Networks GSC3570 User Manual

Hd intercom & facility control station

Hide thumbs Also See for GSC3570:

Table of Contents

It needs to be set to a valid URL, either in FQDN or IP address format. The "Config Server Path" can be

the same or different from the "Firmware Server Path".

A configuration parameter is associated with each field in the web configuration page. A parameter consists

of a Capital letter P and 2 to 5-digit numeric numbers. i.e., P2 is associated with the "New Password" in the

Web GUI→Maintenance→Web Access page→Admin Password. For a detailed parameter list, please

refer to the corresponding configuration template.

When the GSC3570 boots up or reboots, it will issue a request to download a configuration file named

"cfgxxxxxxxxxxxx" followed by an XML file named "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC

address of the GSC3570, i.e., "cfg000b820102ab" and "cfg000b820102ab.xml". If the download of

"cfgxxxxxxxxxxxx.xml" file is not successful, the GSC3570 will issue a request to download a specific model

configuration file "cfg<model>.xml", where <model> is the GSC3570 model, i.e., "cfgGSC3570.xml" for the

GSC3570, "cfgGSC3570" for the GSC3570. If this file is not available, the GSC3570 will issue a request to

download the generic "cfg.xml" file. The configuration file name should be in lower case letters.

For more details on XML provisioning, please refer to:

http://www.grandstream.com/sites/default/files/Resources/gs_provisioning_guide.pdf

No Touch Provisioning

After the GSC3570 sends, config file request to the BroadSoft provisioning server via HTTP/HTTPS, if the

provisioning server responds "401 Unauthorized" asking for authentication, the GSC3570's LCD will prompt

a window for user to enter username and password. Once correct username and password are entered,

the GSC3570 will send config file request again with authentication. Then the GSC3570 will receive the

config file to download and get provisioned automatically.

Besides manually entering the username and password in LCD prompt, users can save the login credentials

for provisioning process as well. The username and password configuration are under GSC3570's web

UI→Maintenance→Upgrade and provisioning page: "HTTP/HTTPS Username" and "HTTP/HTTPS

Password". If the saved username and password saved are correct, login window will be skipped. Otherwise,

P a g e

GSC3570 User Manual

Version 1.0.3.1

Table of Contents