In-Wall Mounting; Connecting The Gsc3570; Figure 5: In-Wall Mounting - Grandstream Networks GSC3570 User Manual

Hd intercom & facility control station

Hide thumbs Also See for GSC3570:

Table of Contents

In-Wall Mounting

1. Locate the box screw holes and align them with the metal

bracket holes. Then, fix a Self-tapping Screw on each

hole. Below are the supported Box dimensions:

• 80mm x 80mm

• 71mm x 115mm

• 115mm x 115mm

2. Plug in the cables to the proper GSC3570 ports on the

back.

3. Align the position slots on device's back with their correct

placement on the Metal Bracket, then fix it by pushing

Down.

4. Plug in the Self-tapping Screws at bottom to attach the

device to the metal bracket.

To setup your GSC3570 from the web interface, please follow the steps below:

1. Ensure your device is powered up and connected to the Internet.

2. Slide to the second home page and press "Setting"

3. Select "Network Status" to check the IP address.

4. Type the unit's IP address in your PC browser. (See figure below).

5. Enter admin's username and password to access the configuration menu.

GSC3570 User Manual

Version 1.0.3.1

P a g e

Table of Contents