Arming Mode; Zone Settings; Basic; Sound - Grandstream Networks GSC3570 User Manual

Arming mode

Enable/Disable the Arming mode on configured zones (Zone 1- 4) per profile (Outdoor, Indoor, Sleeping or
Custom.)
The zones are configured under Settings→ Zone Settings.

Zone Settings

Tap the zone to be edited and set Zone Name, Zone Type along with the alarm type...Etc.
- Zone Name: Enter the name of the zone.
- Zone Type: Select the Type of the Zone:
❖ Infrared
❖ Smoke
❖ Gas
❖ Drmagnet (door lock)
❖ Urgency
❖ Others
- NO/NC: Match the alarm type:
❖ NO: Normally Open device
❖ NC: Normally Close device
Alarm Type: Select the Type of the Alarm arming:
-
❖ Delay Alarm: Enter the Enter Delay/Exit Delay (Duration between 0-60 seconds)
❖ Instant Alarm: Alarm is armed instantly when triggered.
❖ 24h Alarm: Alarm is always armed when triggered.

Basic

Sound

Use the Voice settings to configure the phone's sound mode, volume, ring tone and notification tone.
•
Media Volume: Adjust the sound volume for media audio
•
Ring Volume: Adjust the phone ringing volume
•
Ringtone: Select phone's ringtone for incoming call.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 37