Grandstream Networks GSC3570 User Manual page 64

Maximum
Transmission Unit
(MTU)
Network → OpenVPN® Settings
OpenVPN® Enable
OpenVPN® Server
Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
OpenVPN® Certificate
OpenVPN® Client Key
OpenVPN® Cipher
Method
OpenVPN® Username
OpenVPN® Password
Additional Options
Network → SNMP Settings
Enable SNMP
Configure custom MTU. Default is 1500.
Enable/Disable OpenVPN® feature. Default is No.
Specify the IP address or FQDN for the OpenVPN® Server.
Specify the listening port of the OpenVPN® server. Default is 1194.
Specify the Transport Type of OpenVPN® whether UDP or TCP. Default is
UDP.
Click on "Upload" to upload the Certification Authority of OpenVPN®. For a
new upload, users could click on "Delete" to erase the last certificate, and
then upload a new one.
Click on "Upload" to upload OpenVPN® certificate. For a new upload, users
could click on "Delete" to erase the last certificate, and then upload a new
one.
Click on "Upload" to upload OpenVPN® Key.
For a new upload, users could click on "Delete" to erase the last certificate,
and then upload a new one.
Specifies the Cipher method used by the OpenVPN® server. The available
options are: Blowfish, AES-128, AES-256 and Triple-DES. Default setting is:
Blowfish.
Configures the optional username for authentication if the OpenVPN server
supports it.
Configures the optional password for authentication if the OpenVPN server
supports it.
Additional options to be appended to the OpenVPN® config file, separated
by semicolons. For example, comp-lzo no;auth SHA256
Note: Please use this option with caution. Make sure that the options are
recognizable by OpenVPN® and do not unnecessarily override the other
configurations above.
Enables/Disables the SNMP feature. Default settings is No.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 63