System Update; Reset - Grandstream Networks GSC3570 User Manual

System Update

•
Configure the Firmware server path and protocol. Click on Update Now button to start immediate
upgrade.
•
Click on to access the Upgrade and Provisioning configuration:
❖ Firmware Upgrade and Provisioning:
Always Check for New Firmware:
-
Always Check at bootup when F/W pre/suffix changes
-
Skip the Firmware Check.
-
❖ Firmware Upgrade via: Set the protocol to either HTTP/HTTPS or TFTP for the Firmware server.
❖ Firmware Server Username: Configures the username for the Firmware HTTP/HTTPS server.
❖ Firmware Server Password: Configures the password for the Firmware HTTP/HTTPS server.
❖ Firmware Server Path: Configure the Firmware server path.
❖ Config Upgrade via: Set the protocol to either HTTP/HTTPS or TFTP for the Config server.
❖ Config Server Username: Configures the username for the Config HTTP/HTTPS server.
❖ Config Server Password: Configures the password for the Config HTTP/HTTPS server.
❖ Config Server Path: Configure the Config server path.

Reset

•
Factory reset the device to default settings.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 41