Alarm Settings; Sos Settings; Syslog - Grandstream Networks GSC3570 User Manual

❖ Device Name: Set the device name.
❖ Device Number: Set the SIP extension or the IP address of the Door System.
❖ Door 1/2: Enter the DTMF PIN to open the door remotely.
•
IP Camera: Add/Edit or delete the IP Camera's configuration. Make Call to IP Camera.
❖ Device Type: Select either Door System or IP Camera.
❖ Device Name: Set the device name.
❖ Device Number: Set the SIP extension or the IP address of the IP Camera.

Alarm Settings

•
Select the Call Mode and configured from which account to make calls when alarm is triggered as well
as the receiving numbers.
❖ Call Mode: Select between Serial or Parallel Hunting.
❖ Number 1-4: Set the Account from which the outgoing call will be made and towards which Number.

SOS Settings

•
Select the Call Mode and configured from which account to make calls when SOS key is pressed as
well as the receiving numbers.
❖ Call Mode: Select between Serial or Parallel Hunting.
❖ Number 1-4: Set the Account from which the outgoing call will be made and towards which Number.

Syslog

This page allows to initiate upgrade process by checking if a new firmware is available in the configured
firmware server path, and then upgrading if available. Users can press
Firmware/Provisioning settings directly from the phone's LCD. Following settings can be configured from
this screen:
•
Syslog level: Select the level of logging for syslog. The default setting is "None". There are 4 levels:
DEBUG, INFO, WARNING and ERROR.
•
System log protocol: Select the protocol of syslog (UDP or SSL/TLS).
•
Syslog server address: The URL/IP address for the syslog server. If the GSC3570 has network
connection, the phone will send the syslog packets to this server address.
•
System log keyword filtering: Only send the syslog with keyword, multiple keywords are
separated by comma. Example: set the filter keyword to "SIP" to filter SIP log.
GSC3570 User Manual
Version 1.0.3.1
Settings to configure
P a g e | 40