Settings - Grandstream Networks GSC3570 User Manual

Anonymous Call
Rejection
Auto Answer
Disable Call Waiting
Account x → Intercom Settings
Allow Auto Answer by
Call-Info/Alert-Info
Mute on answer
Intercom call
Custom Alert-Info for
Auto Answer
Accounts → Account Swap
Swap Account

Settings

Settings Page Definitions
Settings → General Settings
Local RTP Port
Local RTP Port Range
If set to "Yes", anonymous calls will be rejected.
The default setting is "No".
If set to "Yes", the GSC3570 will automatically turn on the speakerphone to
answer incoming calls after a short reminding beep. Default setting is "No".
Enables / disables the call waiting feature for the current account. When set
to "Default", global call feature setting will be used.
Default setting is Default.
Allows the GSC3570 to automatically turn on the speakerphone to answer
incoming calls after a short reminding beep when enabled, based on the SIP
Call-Info/Alert-Info header sent from the server/proxy. Default setting is "No".
When enabled, the GSC3570 will mute the incoming intercom call.
Allows to customize Alert-Info header for auto answer. The GSC3570 will
auto answer only if matching content of the custom Alert-info header.
Allows users to swap the two accounts that they have configured. This will
Increase the flexibility of account management.
Note: Make sure to press "Start" to complete the process.
Table 8: Settings Page Definitions
This parameter defines the local RTP port used to listen and transmit. It is
the base RTP port for channel 0. When configured, channel 0 will use this
port _value for RTP; channel 1 will use port_value+2 for RTP.
Local RTP port ranges from 1024 to 65400 and must be even. Default value
is 5004.
Gives users the ability to define the parameter of the local RTP port used to
listen and transmit. This parameter defines the local RTP port from 48 to
10000.
This range will be adjusted if local RTP port + local RTP port range is greater
than 65486.
Default setting is 200.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 56