Grandstream Networks GSC3570 User Manual page 67

Confirm Password
Admin Password
Current Password
New Password
Confirm Password
Maintenance → Upgrade and Provisioning
Upgrade Firmware
Firmware Upgrade and
Provisioning
Always Authenticate
Before Challenge
Validate Hostname in
Certificate
Allow DHCP Option 43
and Option 66 to
Override Server
Additional Override
DHCP Option
Allow DHCP Option
120 to override SIP
Server
3CX Auto Provision
Enter the new User password again to confirm.
The current admin password is required for setting a new admin password.
Set new password for web GUI access as Admin.
Note: This field is case sensitive.
Enter the new Admin password again to confirm.
Allows users to upload the firmware file locally by pressing Start, after
selecting the correct firmware file from the local storage, the GSC3570 will
start the firmware upgrade automatically.
Specifies how firmware upgrading and provisioning request to be sent:
Always Check for New Firmware, Check New Firmware only when F/W
pre/suffix changes, Always Skip the Firmware Check.
The default setting is "Always Check for New Firmware".
Only applies to HTTP/HTTPS. If enabled, the GSC3570 will send credentials
before being challenged by the server. The default setting is "No".
After enabling this feature, device validate the hostname in the SSL
certificate. The default setting is "No".
Default setting is "Yes". DHCP option 66 originally was only designed for
TFTP server. Later, it was extended to support an HTTP URL. GSC3570
supports both TFTP and HTTP server via option 66. Users can also use
DHCP option 43 vendor specific option to do this.
DHCP option 43 approach has priorities. The GSC3570 will fall back to the
original server path configured in case the server from option 66 fails.
When enabled, users could select Option 150 or Option 160 to override the
firmware server instead of using the configured firmware server path or the
server from option 43 and option 66 in the local network. Please note this
option will be effective only when option "Allow DHCP Option 43 and Option
66 to Override Server" is enabled.
The default setting is "None".
Enables DHCP Option 120 from local server to override the SIP Server on
the GSC3570. The default setting is "No".
Enables automatic provision feature (PNP) on the GSC3570. The default
setting is "Yes".
GSC3570 User Manual
Version 1.0.3.1
P a g e | 66