Grandstream Networks GSC3570 User Manual page 47

SIP User ID
Authenticate ID
Authenticate
Password
Name
Voice Mail Access
Number
Account x → Dial Plan
Name
Rule
Type
Account x → Network Settings
DNS Mode
User account information provided by your VoIP service provider (ITSP).
It is usually in the form of digits like phone number or a phone number.
Notes:
•
Users can register an account with a SIP user ID that carries "@". (For
example: "111@test.com", so the GSC3570 will register the account as
"111@test.com" instead of 111)
•
The server domain will not be included in the SIP from header.
SIP service subscriber's Authenticate ID used for authentication.
It can be identical to or different from the SIP User ID.
The account password required for the GSC3570 to authenticate with the
ITSP (SIP) server before the account can be registered.
After it is saved, this will appear as hidden for security purpose.
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
This parameter allows you to access voice messages by pressing the
MESSAGE button on the GSC3570. This ID is usually the VM portal access
number. For example, in UCM6xxx IPPBX, *97 could be used.
Enter the name for the configured rules.
Enter the rule settings (number pattern, prefix to add ...etc.).
Choose the type of the rule:
•
Pattern
•
Block
•
Dial now
•
Prefix
•
Second tone
This parameter controls how the Search Appliance looks up IP addresses
for hostnames.
There are four modes: A Record, SRV, NATPTR/SRV, Use Configured IP.
The default setting is "A Record".
If the user wishes to locate the server by DNS SRV, the user may select
"SRV" or "NATPTR/SRV".
If "Use Configured IP" is selected, please fill in the three fields below:
GSC3570 User Manual
Version 1.0.3.1
P a g e | 46