Network; Ethernet Settings; Wi-Fi; Features - Grandstream Networks GSC3570 User Manual

Network

Users can configure Ethernet settings and Wi-Fi settings here.

Ethernet Settings

•
IPv4 Settings: Here user can configure the IPv4 address type for both data and VoIP calls. For network
configuration of data, if DHCP is selected, the phone will get an IP address automatically from the
DHCP server in the network. This is the default mode. If Static IP is selected, manually enter the
information for IP Address, Subnet Mask, Default Gateway, DNS Server, and Alternative DNS server.
•
802.1x mode: This option allows the user to enable/disable 802.1x mode on the phone. The default
setting is disabled. To enable 802.1x mode, select the 802.1x mode and enter the required configuration
depending on the 802.1x mode chosen. The available modes are EAP-MD5, EAP-TLS and EAP-PEAP

Wi-Fi

•
Tap on "Wi-Fi" to turn on/off Wi-Fi connection. By default, it is turned off.
•
Add Network. If the Wi-Fi network SSID doesn't show up in the list, or users would like to set up
advanced options for the Wi-Fi network, roll to the end of the Wi-Fi list and select "Add Network". Then
Enter SSID, Security type, password and set up address type (DHCP/Static IP) in the prompt dialog.
The phone will reboot with Wi-Fi network connected.

Features

In this menu, users can configure different features related to each account of the active accounts:

Auto-Answer

If Enabled and set to "Always", the phone will automatically turn on the speaker phone to answer all
-
incoming calls.
If enabled and set to "Enable Intercom/Paging", the phone will answer the call based on the SIP info
-
header sent from the server/proxy.
By default, it is turned off.
-

DND

Enable/Disable the DND mode. When enabled, all incoming calls are rejected.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 36