The GSC3570 can be set with trigger button to execute the Alarm output action and numbers configured
on Alarm panel on either the web interface will be ringing as well.
Web interface configuration:
1. Access Settings→ Alarm.
2. Set Call Mode to either Serial Hunting where each number will be called one after one based in
the order from 1-4 after first call times out, or Parallel Hunting where all configured numbers receive
the call simultaneously.
3. Select the Account from which the call will be made and enter the SIP extension or IP address to
be called. (Default is Dynamic, so the GSC will use the first available line).
4. Click on Save and Apply.
Figure 19: SOS: LCD Configuration
Figure 20: Alarm: Web Configuration
GSC3570 User Manual
Version 1.0.3.1
P a g e
|
30