Grandstream Networks GSC3570 User Manual page 71

Syslog Keyword
Filtering
Send SIP Log
Maintenance → Security Settings→ Security
Validate Server
Certificates
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Custom Certificate
Web Access Mode
HTTP Web Port
HTTPS Web Port
Disable SSH
SSH Public Key
Web Session Timeout
Web Access Attempt
Limit
Syslog will be filtered based on keywords provided. If you enter multiple
keywords, it should be separated by ','. Please note that no spaces are
allowed.
Configures whether the SIP log will be included in the syslog messages.
The default setting is "No".
Note: By setting Send SIP Log to Yes, the GSC3570 will still send SIP log
from syslog even when Syslog Level set to NONE.
After enabling this feature, GSC3570 will validate the server's certificate. If
the server that our GSC3570 tries to register on is not on our list, it will not
allow server to access the GSC3570.
SSL Certificate used for SIP Transport in TLS/TCP.
SSL Private key used for SIP Transport in TLS/TCP.
SSL Private key password used for SIP Transport in TLS/TCP.
The uploaded custom certificate will be used for SSL/TLS communication
instead of the GSC3570 default certificate.
Sets the protocol for web interface.
•
HTTPS
•
HTTP
•
Disabled
•
Both HTTP and HTTPS
The default setting is "HTTP".
Configures the HTTP port under the HTTP web access mode. Default is 80.
Configures the HTTPS port under the HTTPS web access mode. Default
setting is "443".
Disables SSH access. The default setting is "No".
This option allows you to use authentication keys for SSH access. The
public key should be loaded to GSC3570's web UI while the private key
should be used in the SSH tool side.
Note: This will allow upcoming SSH access without password.
Configures timer to logout web session during idle. Default is 10 min. Range
is 2-60 min.
Configures attempt limit before lockout. Default is 5. Range is 1-10.
GSC3570 User Manual
Version 1.0.3.1
P a g e | 70