Reducing Wait Time For Mixed Paper Sizes 2 - Ricoh Pro 8300S Troubleshooting Manual

5.Other Information
4. Can you get permission from the client to reduce efficiency of paper feed?
This step could possibly cause paper curl, jams, or wrinkling with low fusing temperature

paper.
Yes
No
5. Can you get permission from the client to reduce image quality?
This step could possibly cause paper curl, jams, or wrinkling with low fusing temperature

paper.
Yes
No
Never reduce the heating roller temperature for high fusing temperature paper. Doing so could

cause poor fusing and foul the parts inside the machine with toner.

Reducing Wait Time for Mixed Paper Sizes 2

When printing with mixed paper sizes, the increase in the time required for the machine to adjust the
fusing unit settings suitable for all the different sized paper can on occasion reduce productivity. Follow
this procedure to determine the minimum wait time while achieving optimal fusing conditions for the
client's needs when using mixed paper sizes.
The wait time may increase in the following cases:
1. When there is a large difference in the heating roller temperature settings for differences in paper
types and paper thicknesses.
2. When there is a large difference in the heating roller temperature settings for differences in paper
types and paper widths (where width is in the direction across the paper path, front to rear of the
machine)
3. When there is a large number of rapidly repeated small jobs.
Doing this procedure can reduce the wait time for Case 1 above. The setting can be adjusted with 0212
in the Trained Operator Mode.
848
Go to Step 5.
No solution for this machine.
Finished.
No solution for this machine.