Ricoh Pro 8200 Series Technical Bulletin

Reissued: 21-Nov-16
Model:
Leo-C1a/C1b (D194/D195)
RTB Reissue
The items in bold and italics were corrected or added.
Subject:
Adjustments in Vacuum Feed LCIT to prevent no-feed
and double-feed jams
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Supplementary Explanation on the Adjustments to Prevent No-feed and
Double-feed Jams in the Vacuum Feed LCIT
The vacuum feed LCIT is capable of feeding a versatile range of media, but is also
susceptible to paper curl by the nature of its mechanism of blowing air to separate the
sheets. This bulletin provides explanations on the adjustments to prevent double-feed and
no-feed jams, especially caused by paper curl. The main jam codes are as follows:
Jam type
No-feed Upper Tray of 1st LCIT
Lower Tray of 1st LCIT
Upper Tray of 2nd LCIT
Lower Tray of 2nd LCIT
Upper Tray of 3rd LCIT
Lower Tray of 3rd LCIT
Jam type
Double-feed Upper Tray of 1st LCIT
Lower Tray of 1st LCIT
Upper Tray of 2nd LCIT
Lower Tray of 2nd LCIT
Upper Tray of 3rd LCIT
Lower Tray of 3rd LCIT
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
Jam location
Jam location
B
ulletin
Date:
23-Feb-15
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
Jam code
J430
J431
J445
J446
J460
J461
Jam code
J470
J471
J485
J486
J500
J501
PAGE: 1/8
No.:
RD777001b
Shinnosuke Sasaki
Action required
Service manual revision
Retrofit information
Tier 2