Right Steering Plate Adjustment - Ricoh Pro 8300S Troubleshooting Manual

5.Other Information
the right steering plate should not be adjusted. Leave the right steering plate at its factory
setting, and adjust the left steering plate.

Right Steering Plate Adjustment

1. Execute application of lubricant with SP2-310-001, and then do SP2-920-002 (Steering Control
Roller Stable Position of Steering Roller), and check its setting. Based on this setting, adjust the
position of the right steering plate by referring to the table below.
SP2-920-
002
+21 to +150
-20 to +20
-20 to -150
2. Loosen (do not remove) the four screws at [A] and [B].
856
From the Current Right Steering Plate Scale
+1
No adjustment required
-1
Setting
Comments
Move to upper part of
scale
Within correct range
Move to lower part of
scale