Chapter 3 Symbology Settings; Codabar - Inateck P7 User Manual

Chapter 3 Symbology Settings

3.1 Codabar

Enable / Disable Codabar
3.1.1
Decide whether to enable Codabar through selecting correspondent barcode below. The Inateck
P7 Scanner defaults enable Codabar contents.
（*）Enable Codabar
Disable Codabar
Note: Scanning the "Disable Codabar" barcode will make the barcode scanner unable to read the
Codabar barcode. Thus, if the scanner cannot read the Codabar barcode, please try to scan
"Enable Codabar" to reset.
For example: Steps to enable Codabar are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save
33