Code 128; Enable/Disable Code 128; Enable/Disable Gs1-128 (Ucc/Ean-128) - Inateck P7 User Manual

3.3 Code 128

3.3.1 Enable/Disable Code 128

Decide whether to enable Code 128. Inateck P7 Scanner defaults "Enable Code 128".
（*）Enable Code 128
Disable Code 128
Note: Read the "Disable Code 128" barcode will make the scanner unable to read Code
128 barcode. Thus, if the scanner cannot read the Code 128 barcode, please try to scan
"Enable Code 128" to reset.
For Example: Steps to enable Code 128 are as below:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 128" barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save

3.3.2 Enable/Disable GS1-128 (UCC/EAN-128)

The GS1-128 standard belongs to the application standard of Code 128, so it complies with the
coding rules of Code 128. P7 disables GS1-128 by default. You can set whether to enable
GS1-128.
37