Upc-A; Enable/Disable Upc-A - Inateck P7 User Manual

（*）Verify MIS with Output Checksum Character
Verify MSI without Output Checksum Character
Operations are as below if you want to verify with one digit checksum character and do not
transmit checksum character:
1. Read the "Enter Setup" barcode;
2. Read the "Verify MSI with one digit Checksum Character" barcode;
3. Read the "Verify MSI without Output Checksum Character" barcode;
4. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save

3.9 UPC-A

3.9.1 Enable/Disable UPC-A

Decide whether to enable UPC-A barcode by scanning correspondent barcode below. Inateck P7
defaults "Enable UPC-A barcode".
（*）Enable UPC-A
Disable UPC-A
49