Chapter 1 Features and Basic Setups
This chapter introduces the features and usage of the P7 barcode scanner.
1.1 Battery
The P7 barcode scanner is powered by 2600mAh chargeable Lithium batteries. If you use the red
light auto-off mode, the barcode scanner can work 107 hours continuously under 433MHz
wireless mode, when it can read 192,600 barcodes (read a barcode Code 128 every 2s).
1.1.1 To recharge
To recharge the barcode scanner, please use the USB cable included, and connect the barcode
scanner to the USB port of a working computer or a 5V charger. When the barcode scanner is
being recharged, the red LED indicator is on. It goes off when the barcode scanner is fully
recharged.
1.1.2 Auto Sleep Mode
In order to save energy, users can specify the time interval for the scanner to automatically turn
off. The default one is 3 minutes.
(*)Enable Auto-sleep mode
Exit Auto-sleep mode
Set 1 min to be auto-off
(*)Set 3 min to be auto-off
Set 5 min to be auto-off
Set 10 min to be auto-off
12