Beeper; Beeper Volume - Inateck P7 User Manual

1.4 Beeper

The built-in beeper in the P7 can help the user to know about the current operation status.
Beeping
One short high note(100ms） Read barcode successfully
One short high note（20ms） Data upload from scanner to host
One long high note（400ms） Wrong Setup（on setup status, blue LED stays on）
Two or several long high
notes（800ms）
Three chord sounds (tone
from low to high)
Three chord sounds (tone
from high to low)
Two short notes（the same
tone）
Two short notes (tone from
low to high)
Two short notes (tone from
high to low)

1.4.1 Beeper Volume

Mute
(*) Medium Volume
Meaning
433MHz Pairing Failure (Occurs only during the pairing
process)
Invalid scanning due to full buffer. (Scanned barcode not
saved)
USB being configured
Enter setup mode（Blue LED on）
Exit setup mode（Blue LED off）
Bluetooth connected
Bluetooth disconnected
Correct setup
The connection between Inateck P7 and computer/phone is
disrupted.
16
Minimum Volume
Maximum Volume